PDA

View Full Version : d16z6 not starting!!!!!!!!!!!



blown_ss
07-22-2010, 09:52 PM
ok so i have tried to search this problem more times then i can count. a buddy of mine bought a 93 si hatch that had been sitting for about 2 years. the car wouldnt start the first day but after messing with some fuses it started. the car was driven for maybe a day or 2. he starts it up one morning to let it warm up before he drives to work and as its warming it shuts off. the car wouldnt start after that. after changing the dizzy, coil, plugs, wires, cap, and rotor with all new parts still nothing. today he removed the fuel rail to see if the injectors were working and he got nothing. the pump is priming so he removed one injectors and fuel was shooting out of the hole. what would make the injectors not work? any help would be great.

Theycall_Metue
07-22-2010, 10:07 PM
did you change the gas? old gas can clog injectors.
if all that was done and your 100% sure injectors are good and its getting fuel but its not going through the injectors than ecu isnt sending signal.
try swaping the ecu

blown_ss
07-22-2010, 10:43 PM
did you change the gas? old gas can clog injectors.
if all that was done and your 100% sure injectors are good and its getting fuel but its not going through the injectors than ecu isnt sending signal.
try swaping the ecu

the car was on E so there wasnt much gas to get out. 93 was added. im sure all of that was done and i forgot that we tried another ecu and it didnt work.

hondaxpurt
07-23-2010, 08:54 AM
it might be the CKP sensor. check fuel pressure at the fuel filter

Barefoot
07-23-2010, 11:54 AM
give me a call i got a few easy diags i can do.

blown_ss
07-23-2010, 04:04 PM
hey i gave my buddy your number and he should be calling you if he hasnt already. thanks man.