View Full Version : valve cover bolts breaking off
nateej1
02-13-2010, 02:54 PM
ok I have a huge prob.:(
I have 3 count them 3 bolts broke off in my head from the valve cover bolts is there anyway i could get them drilled out and put a diff. bolt in there. I have put the gasket maker on there to slow the oil from coming out so...... any ideas ????????:thinking:
SRK420a
02-13-2010, 04:21 PM
ok I have a huge prob.:(
I have 3 count them 3 bolts broke off in my head from the valve cover bolts is there anyway i could get them drilled out and put a diff. bolt in there. I have put the gasket maker on there to slow the oil from coming out so...... any ideas ????????:thinking:
Compare a drill bit to the valve cover bolts, go one size under, drill them out, wedge something in the hole you make and carefully unscrew the remainder. This just mite be smart enough to work
Just be careful and stay in the middle of the broken bolts so you dont hit the screws walls.:goodjob:
TSiFTW
02-13-2010, 04:28 PM
Drill them out and re tap the holes. Better make sure to get someone with some experience to do this for you.
SRK420a
02-13-2010, 05:39 PM
Drill them out and re tap the holes. Better make sure to get someone with some experience to do this for you.
or what he said
nateej1
02-13-2010, 06:53 PM
thanks:D
98blackcivic
02-13-2010, 08:01 PM
PLZ PLZ LET PROFESSIONALS HANDLE THIS!!!!
thanks
good luck
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.