Log in

View Full Version : !!!! EG CLUSTER HELP!!!!



Black4DrEK
02-02-2010, 02:22 PM
Ok soo My CLUSTER in EG chassis Civic Doesnt work.

The back lights work. BUT NO RPM,MPH, Temp, gas, NOTHING WORKS.. ALSO BLINKERS WONT WORK WHEN I TRY THEM!!

I wired the cluster CORRECT back to STOCK, It use to have a LS cluster in it that also DIDNT work..

I ALSO swaped out a cluster from my friends civic, STILL NOTHING!!???:thinking:

Help needed asap.. thanks

Starrfire
02-02-2010, 02:28 PM
you sure your wiring is correct? You could have fried it so it wouldn't work in his car. Or just a bad cluster. The way to do it would be to use your buddy's cluster as the "control" test since it works. If it stops working after that, then you have problems and so does he lol. But if his works in yours and his again, then you have bad clusters.

laokid
02-02-2010, 02:28 PM
damn, does your fuse keep blowing out?

laokid
02-02-2010, 02:29 PM
or did u check them yet?

Black4DrEK
02-02-2010, 02:35 PM
you sure your wiring is correct? You could have fried it so it wouldn't work in his car. Or just a bad cluster. The way to do it would be to use your buddy's cluster as the "control" test since it works. If it stops working after that, then you have problems and so does he lol. But if his works in yours and his again, then you have bad clusters.


YES wired CORRECT..

I put HIS cluster in MY car.. and it didnt work.. But when i put it back in his it works..MY cluster i have isnt bad.

Black4DrEK
02-02-2010, 02:35 PM
all my fuses are good

Black4DrEK
02-02-2010, 03:33 PM
Is there a Ground wire i need to hook up or something?..

Starrfire
02-02-2010, 06:18 PM
Maybe a loose pin?

STRteg
02-02-2010, 07:18 PM
Are all your wiring harness connections....connected?

H1Cblacknight
02-02-2010, 07:22 PM
check the copper layout where the plugs insert to the cluster. that happen to a buddy of mine. They may be scratched or plan Fuked up

a94civicex
02-02-2010, 07:30 PM
Good Luck bro, atleast you have cluster lights, I have to run with indiglo gauges in my ej because my cluster & dash lights don't work.... Bulbs are fine.... I believe I've got a loose connection because sometimes (rarely) they come on & work, then go out.... Either a loose ground, bad connection or switch is bad on mine, for now the indiglos work fine with me to see my rpm, mph, gas & temp gauges.... Bad part is my gas & temp don't work.... Plus my rpm & mph needles jump causing my mph needle to wrap around.... Just ghetto lol.... And a shitty cluster.... I need one asap.... Know anyone....?

Black4DrEK
02-02-2010, 10:53 PM
Are all your wiring harness connections....connected?

Yea Im STUMPED! Think i might try to just get whole new harness for the inside of the car.

laokid
02-03-2010, 09:49 AM
man sound like the problem i had, cluster light and mph work,turning switch dont work for turning lights,reverse lights dont work,defrosser and fog lights dont work and seat belts....come by my house let me check it out!

STRteg
02-03-2010, 08:27 PM
Yea Im STUMPED! Think i might try to just get whole new harness for the inside of the car.

well if your gonna pull the dash to replace the dash harness you'll have more than enough chances and time to overlook all your wiring and make sure everything is up to par

Captain-Obvious™
02-03-2010, 09:20 PM
Thank God I'm rollin' stock again. I hated bullshit problems like these.

i4_garage
02-03-2010, 10:09 PM
just pull the dash. 30min fix or less

Black4DrEK
02-03-2010, 10:51 PM
I got this hatch like it is.. Somebody else F'd it up..

Black4DrEK
02-03-2010, 10:54 PM
just pull the dash. 30min fix or less\

I got no problem pullin a dash. pull the dash and do what? I have checked wires allready.. Probly juss gonna change out all harnesses