JJSPEC Racing Garage Sale

[JJSPEC Racing]

These are some items that are in good usable shape that have accumulated over the years. Please feel free to ask questions. Will be adding more items and pics so feel free to check back soon. Thanks for looking :)

Wiseco Pistons PN#6566M81 B Series 81MM High Compression. Around 11.5-1 depending on head, head gasket thickness, etc. Around 1000 miles. $250:

http://i166.photobucket.com/albums/u116/jjspec/000_0001_02-1.jpg

GReddy Kit for D-Series. Complete with everything including fmic. Does not have engine management. Came off of my personal car for upgrade $800. Can be installed for total of $1200:

http://i166.photobucket.com/albums/u116/jjspec/000_0002-7.jpg

Misc fuel rails. Stock D/H/F/K $50. Aftermarket D $75:

http://i166.photobucket.com/albums/u116/jjspec/000_0005-4.jpg

Plenty of random intake and exhaust stock manifolds. Mostly Honda stuff but there is one 4G63 intake manifold. $60 per intake and 40 per exhaust 100 for Headers. PM if you have one you need:

http://i166.photobucket.com/albums/u116/jjspec/000_0005-6.jpg

H Series Skunk 2 Manifold from JJSPEC Racing Hot Rod(Ran 9.2 @158 on it)$225:

http://i166.photobucket.com/albums/u116/jjspec/000_0004-4.jpg

Complete H22 head from valve cover to headbolts $225:

http://i166.photobucket.com/albums/u116/jjspec/000_0002-6.jpg

JJSPEC Racing's 1995 Honda Civic Hot Rod Chassis(Race Car, VIN N/A) $3500:
Chassis only. Comes with:
Chromoly 12 point cage certified until 2010 with parachute mount wheelie bar mounts
1 piece rear axle setup that will accommodate factory or aftermarket brakes
Spare tire well removed and replaced with Aluminum
Eibach Springs Rear
Competition Engineering rear shocks
1 piece MB Products fiberglass front end
MB Products trunk lid
Lexan windows
Lightened Factory doors
Cromoly Wheelie Bars
Will sell trailer and chassis together for $7000

http://i166.photobucket.com/albums/u116/jjspec/mir9.jpg

http://i166.photobucket.com/albums/u116/jjspec/mir7.jpg

http://i166.photobucket.com/albums/u116/jjspec/mir5.jpg

http://i6.photobucket.com/albums/y217/BoostedHonda/JJSPEC/image007.jpg

24 foot enclosed trailer. This is a great unit for hauling your race/show car. Has extra height roof, wide side door that you can bring a four wheeler through. Has some minor damage on R/F and R/R. Comes with a weight distribution hitch($400 value) and spare wheel(needs a tire). Paid $6500 new, asking for $4500:

http://i166.photobucket.com/albums/u116/jjspec/000_0002_00-1.jpg http://i166.photobucket.com/albums/u116/jjspec/000_0001_00-1.jpg

ECUs. OBD1:P0A P14 PT6 PO6 P2P PR4 P2E PT6 OBD2: POB PAA K Series PNA

http://i166.photobucket.com/albums/u116/jjspec/000_0001-5.jpg

Stock Oil pans D/F/H Series $25

Stock Valve Covers $50 Can have bungs welded on for an addition fee.

JJSPEC Racing Lazer cut SS keytags $5.00:

http://i166.photobucket.com/albums/u116/jjspec/000_0002_02.jpg

[Da_unknown]

What's a lot of good stuff u have there..

[JJSPEC Racing]

Thanks. Been going to put a for sale thread up for a while, but just been really busy.

[shadowx3]

bump nice bro g/l on sale

[ls-r teg]

nice stuff man...h22 injectors?

[JJSPEC Racing]

I believe I have some. Let me know if you need them.

[Red_EJ1]

bump for my x boss lol... how r things goin over there jimmy...

[redneckhatch]

bump for alot of good stuff

[CaTcH22]

Lots of nice stuff for sale here. It all needs to get sold....to get the hell outta my way. :D

[Starrfire]

sweet stuff man

[JJSPEC Racing]

bump for my x boss lol... how r things goin over there jimmy...
Good. How about you?

[chorne1787]

hey jimmy pm me the lowest you can do if it isn't the lowest for the greddy kit have a friend with a 4 door ef that is intrested also pm me lowest for your full set up out of the teg if you will same stipulations don't want you insulted or nothin

[DarKStaR]

bump for alot of good stuff that needs to get sold to fund other things...


Jimmy anyway you can snag a pic of my gsr block on the stand so i can put it up for sale this week?

[Vteckidd]

I'll take clutch and flywheel for b series the cc stuff

pm me

[JJSPEC Racing]

hey jimmy pm me the lowest you can do if it isn't the lowest for the greddy kit have a friend with a 4 door ef that is intrested also pm me lowest for your full set up out of the teg if you will same stipulations don't want you insulted or nothin

PM Sent


bump for alot of good stuff that needs to get sold to fund other things...


Jimmy anyway you can snag a pic of my gsr block on the stand so i can put it up for sale this week?

Pm me in the am and I will post it for you:goodjob:

I'll take clutch and flywheel for b series the cc stuff

pm me

PM Sent

[zracin]

how much for an intake mani, headers, and exhaust for b16 (99 si). any 84mm pistons?

[JJSPEC Racing]

how much for an intake mani, headers, and exhaust for b16 (99 si). any 84mm pistons?

Unfortunately I dont have any 84 mm pistons. I will check on the I/H/E and see what I can come up with. Thanks for looking.

[NevrNufTorq]

good stuff and nice air to water!!!! love the key cuts for yall:yes:

[Dev]

damn too much nice shit! cant take it all in at once! glws

[J-ROCK]

i wanna key cut

[Franco Tirador]

up

[WalkS]

Bump for Jimmy, good stuff!

[JJSPEC Racing]

good stuff and nice air to water!!!! love the key cuts for yall:yes:

That is a nice unit. The pump in the tank moves a lot of water and with it being inside it makes for a clean install.


i wanna key cut

I can mail the key tags out if you would like one.

[geezy]

bump glws

[.:Stirfry:.]

i knoe where im goin shoppin at!.

your the man jimmy

[Fast4DoorDC]

bump for boost

[J-ROCK]

That is a nice unit. The pump in the tank moves a lot of water and with it being inside it makes for a clean install.



I can mail the key tags out if you would like one.


can i just stop by i live off forsyth rd

[DarKStaR]

yes

[greasemunkey]

wiseco! lol nice stuff, good prices too

[JJSPEC Racing]

can i just stop by i live off forsyth rd

Of course! Stop by and get a tag and see what is happening!

[JDMGRNAV6]

badassmfshitttt

[Nateds16]

you have a pm sir

[JJSPEC Racing]

You have a reply:)

[J-ROCK]

Of course! Stop by and get a tag and see what is happening!

cool man sounds good ill proably swing by sometime tomorrow around 10 or so

[jcs]

hmmm really wantin the piston rod combo for a build.....

[JJSPEC Racing]

bump for a good guy, what are you putting back in the integra Jimmy?

I have a S372 a ported head, a sleeved block, and some badness in the bottom end. There is a guy in North Carolina that made 735 on a SOHC with something similar. Hopefully I will make a little more power and not have to worry about the block:D

[Red_EJ1]

Good. How about you?

tryin hard and gettin no where, lol tryin to get ej1 back on the streets, just tryin to get it painted first. then gonna start saving to build another motor:ninja:

[JJSPEC Racing]

Good luck with it. Sounds like it is going to be nice!

[Just_CHill]

pm'd

[Stancil1216]

bump... got a good H series EGR valve and a ps pump?

[Evil Goat]

bump this stuff up...


you guys wanting stuff send jj a pm....much much easier to sift through the requests that way!

[TangDang]

I have a S372 a ported head, a sleeved block, and some badness in the bottom end. There is a guy in North Carolina that made 735 on a SOHC with something similar. Hopefully I will make a little more power and not have to worry about the block:D

PMED

[Evil Goat]

ttt

[Romeo]

Do you guys happen to have a pre-obd iacv for an Integra?

[Kourt]

BUMP

[JJSPEC Racing]

PM sent.

[teamjdm4dr]

hey do you have any d series headers in that pile?? im tryin to find some dc sports or somethin close.. im goin back to n/a instead of boost..