Page 1 of 2 12 LastLast
Results 1 to 40 of 47

Thread: JJSPEC Racing Garage Sale

  1. #1
    IA Sponsor JJSPEC Racing's Avatar
    Join Date
    Nov 2006
    Location
    www.jjspec.com Macon, Ga
    Posts
    1,619
    Rep Power
    23

    Default JJSPEC Racing Garage Sale

    These are some items that are in good usable shape that have accumulated over the years. Please feel free to ask questions. Will be adding more items and pics so feel free to check back soon. Thanks for looking

    Wiseco Pistons PN#6566M81 B Series 81MM High Compression. Around 11.5-1 depending on head, head gasket thickness, etc. Around 1000 miles. $250:



    GReddy Kit for D-Series. Complete with everything including fmic. Does not have engine management. Came off of my personal car for upgrade $800. Can be installed for total of $1200:



    Misc fuel rails. Stock D/H/F/K $50. Aftermarket D $75:



    Plenty of random intake and exhaust stock manifolds. Mostly Honda stuff but there is one 4G63 intake manifold. $60 per intake and 40 per exhaust 100 for Headers. PM if you have one you need:



    H Series Skunk 2 Manifold from JJSPEC Racing Hot Rod(Ran 9.2 @158 on it)$225:



    Complete H22 head from valve cover to headbolts $225:



    JJSPEC Racing's 1995 Honda Civic Hot Rod Chassis(Race Car, VIN N/A) $3500:
    Chassis only. Comes with:
    Chromoly 12 point cage certified until 2010 with parachute mount wheelie bar mounts
    1 piece rear axle setup that will accommodate factory or aftermarket brakes
    Spare tire well removed and replaced with Aluminum
    Eibach Springs Rear
    Competition Engineering rear shocks
    1 piece MB Products fiberglass front end
    MB Products trunk lid
    Lexan windows
    Lightened Factory doors
    Cromoly Wheelie Bars
    Will sell trailer and chassis together for $7000









    24 foot enclosed trailer. This is a great unit for hauling your race/show car. Has extra height roof, wide side door that you can bring a four wheeler through. Has some minor damage on R/F and R/R. Comes with a weight distribution hitch($400 value) and spare wheel(needs a tire). Paid $6500 new, asking for $4500:



    ECUs. OBD1:P0A P14 PT6 PO6 P2P PR4 P2E PT6 OBD2: POB PAA K Series PNA



    Stock Oil pans D/F/H Series $25

    Stock Valve Covers $50 Can have bungs welded on for an addition fee.

    JJSPEC Racing Lazer cut SS keytags $5.00:

    Last edited by JJSPEC Racing; 02-14-2010 at 04:18 PM.


    JJSPEC RACING - Central Ga's source for performance parts,
    fabrication, tuning, general repair and a whole lot more! 478 621 5000


  2. #2
    under construction Da_unknown's Avatar
    Join Date
    Sep 2006
    Location
    BK ALL DAY
    Age
    42
    Posts
    5,168
    Rep Power
    27

    Default

    What's a lot of good stuff u have there..
    GECKO SQUAD MEMBER
    MSS RACING REPRESENTA.....
    the saga continues....

  3. #3
    IA Sponsor JJSPEC Racing's Avatar
    Join Date
    Nov 2006
    Location
    www.jjspec.com Macon, Ga
    Posts
    1,619
    Rep Power
    23

    Default

    Thanks. Been going to put a for sale thread up for a while, but just been really busy.


    JJSPEC RACING - Central Ga's source for performance parts,
    fabrication, tuning, general repair and a whole lot more! 478 621 5000


  4. #4
    JDM-EJ1 shadowx3's Avatar
    Join Date
    Dec 2007
    Location
    G-County
    Age
    37
    Posts
    1,595
    Rep Power
    19

    Default

    bump nice bro g/l on sale

  5. #5
    slingshot sales ceo. ls-r teg's Avatar
    Join Date
    May 2007
    Location
    gwinnett
    Age
    37
    Posts
    2,040
    Rep Power
    23

    Default

    nice stuff man...h22 injectors?
    Quote Originally Posted by civic gsr View Post
    STILLHAVE THAT PENIS ?????
    They should have never gave u niggggas vtec

  6. #6
    IA Sponsor JJSPEC Racing's Avatar
    Join Date
    Nov 2006
    Location
    www.jjspec.com Macon, Ga
    Posts
    1,619
    Rep Power
    23

    Default

    I believe I have some. Let me know if you need them.


    JJSPEC RACING - Central Ga's source for performance parts,
    fabrication, tuning, general repair and a whole lot more! 478 621 5000


  7. #7
    where my vtec go
    Join Date
    Nov 2008
    Location
    Middle GA.
    Age
    38
    Posts
    435
    Rep Power
    17

    Default

    bump for my x boss lol... how r things goin over there jimmy...

  8. #8
    92 Hatch redneckhatch's Avatar
    Join Date
    Nov 2008
    Location
    White Castle
    Age
    34
    Posts
    958
    Rep Power
    17

    Default

    bump for alot of good stuff

  9. #9
    The H is back... CaTcH22's Avatar
    Join Date
    May 2009
    Location
    AccuracyPerformanceAutomotive
    Age
    45
    Posts
    985
    Rep Power
    18

    Default

    Lots of nice stuff for sale here. It all needs to get sold....to get the hell outta my way.
    500whp of spinnin fury!!!

  10. #10
    Super H8ter Starrfire's Avatar
    Join Date
    Jul 2008
    Age
    39
    Posts
    2,009
    Rep Power
    21

    Default

    sweet stuff man
    My line of work
    www.internationaljets.com


  11. #11
    IA Sponsor JJSPEC Racing's Avatar
    Join Date
    Nov 2006
    Location
    www.jjspec.com Macon, Ga
    Posts
    1,619
    Rep Power
    23

    Default

    Quote Originally Posted by Red_EJ1 View Post
    bump for my x boss lol... how r things goin over there jimmy...
    Good. How about you?


    JJSPEC RACING - Central Ga's source for performance parts,
    fabrication, tuning, general repair and a whole lot more! 478 621 5000


  12. #12
    rocking the f20c
    Join Date
    Apr 2009
    Location
    Warner robins
    Age
    36
    Posts
    265
    Rep Power
    17

    Default

    hey jimmy pm me the lowest you can do if it isn't the lowest for the greddy kit have a friend with a 4 door ef that is intrested also pm me lowest for your full set up out of the teg if you will same stipulations don't want you insulted or nothin
    Quote Originally Posted by slovic
    hondas aren't cars, they are legos.


    best of 14.2 back N/A
    Megan single and gutted out box
    hunt for boost again

  13. #13
    Southern Speed
    Join Date
    Apr 2005
    Location
    Macon
    Age
    37
    Posts
    3,532
    Rep Power
    25

    Default

    bump for alot of good stuff that needs to get sold to fund other things...


    Jimmy anyway you can snag a pic of my gsr block on the stand so i can put it up for sale this week?
    11.7@116- All motor H2B Integra

  14. #14
    Gods Chariot Vteckidd's Avatar
    Join Date
    Jul 2003
    Location
    Atlanta Centennial Park
    Age
    44
    Posts
    33,102
    Rep Power
    71

    Default

    I'll take clutch and flywheel for b series the cc stuff

    pm me
    Enterprise Data Resources- Ecommerce Project Manager
    -www.usedbarcode.net

  15. #15
    IA Sponsor JJSPEC Racing's Avatar
    Join Date
    Nov 2006
    Location
    www.jjspec.com Macon, Ga
    Posts
    1,619
    Rep Power
    23

    Default

    Quote Originally Posted by chorne1787 View Post
    hey jimmy pm me the lowest you can do if it isn't the lowest for the greddy kit have a friend with a 4 door ef that is intrested also pm me lowest for your full set up out of the teg if you will same stipulations don't want you insulted or nothin
    PM Sent

    Quote Originally Posted by DarKStaR View Post
    bump for alot of good stuff that needs to get sold to fund other things...


    Jimmy anyway you can snag a pic of my gsr block on the stand so i can put it up for sale this week?
    Pm me in the am and I will post it for you
    Quote Originally Posted by Vteckidd View Post
    I'll take clutch and flywheel for b series the cc stuff

    pm me
    PM Sent


    JJSPEC RACING - Central Ga's source for performance parts,
    fabrication, tuning, general repair and a whole lot more! 478 621 5000


  16. #16
    Certified Gearhead zracin's Avatar
    Join Date
    Dec 2005
    Location
    Decatur
    Age
    42
    Posts
    268
    Rep Power
    20

    Default

    how much for an intake mani, headers, and exhaust for b16 (99 si). any 84mm pistons?

  17. #17
    IA Sponsor JJSPEC Racing's Avatar
    Join Date
    Nov 2006
    Location
    www.jjspec.com Macon, Ga
    Posts
    1,619
    Rep Power
    23

    Default

    Quote Originally Posted by zracin View Post
    how much for an intake mani, headers, and exhaust for b16 (99 si). any 84mm pistons?
    Unfortunately I dont have any 84 mm pistons. I will check on the I/H/E and see what I can come up with. Thanks for looking.


    JJSPEC RACING - Central Ga's source for performance parts,
    fabrication, tuning, general repair and a whole lot more! 478 621 5000


  18. #18
    Senior Member
    Join Date
    Feb 2004
    Location
    villa rica, ga
    Age
    52
    Posts
    3,009
    Rep Power
    26

    Default

    good stuff and nice air to water!!!! love the key cuts for yall
    00 GSR 13.33@114 (355/304), 92 LX 5.0(twin somethings), 02 MTI(TX) ZO7 427 (540/518)sold, bmw 318w/2jz(driftn), 93 Supra TT Hardtop, 04 ford excursion, 55 chevy cruiser

    MabletonSpeedShop member

    MCE Mafia supporting member
    honored to be MCE Dec'08 rotm
    http://uk.youtube.com/watch?v=RNQN9i4Be-kvette mtn run
    http://www.youtube.com/watch?v=RjgbxbGyN5A poopra 1st 9sec 1/4

  19. #19
    DA with a lil sumtin Dev's Avatar
    Join Date
    Jul 2008
    Location
    Rome
    Age
    36
    Posts
    1,899
    Rep Power
    20

    Default

    damn too much nice shit! cant take it all in at once! glws

  20. #20
    rolla rollin
    Join Date
    Aug 2007
    Location
    middle GA
    Age
    34
    Posts
    4,818
    Rep Power
    25

    Default

    i wanna key cut

  21. #21
    desde lejos.... Franco Tirador's Avatar
    Join Date
    Aug 2006
    Location
    hang a left, make a right and you're there
    Age
    40
    Posts
    2,712
    Rep Power
    23

    Default

    up

  22. #22
    Senior Member WalkS's Avatar
    Join Date
    Jul 2005
    Location
    Middle Ga
    Posts
    1,764
    Rep Power
    23

    Default

    Bump for Jimmy, good stuff!
    JJSPEC Racing
    "He who judges a book by its cover will soon be staring at taillights."

  23. #23
    IA Sponsor JJSPEC Racing's Avatar
    Join Date
    Nov 2006
    Location
    www.jjspec.com Macon, Ga
    Posts
    1,619
    Rep Power
    23

    Default

    Quote Originally Posted by NevrNufTorq View Post
    good stuff and nice air to water!!!! love the key cuts for yall
    That is a nice unit. The pump in the tank moves a lot of water and with it being inside it makes for a clean install.

    Quote Originally Posted by J-ROCK View Post
    i wanna key cut
    I can mail the key tags out if you would like one.


    JJSPEC RACING - Central Ga's source for performance parts,
    fabrication, tuning, general repair and a whole lot more! 478 621 5000


  24. #24
    Sohc Me Beautiful geezy's Avatar
    Join Date
    May 2009
    Location
    With Your Mom
    Age
    35
    Posts
    1,417
    Rep Power
    18

    Default

    bump glws

  25. #25
    aye bro .:Stirfry:.'s Avatar
    Join Date
    Jun 2007
    Location
    Warner Robins
    Age
    35
    Posts
    4,344
    Rep Power
    26

    Default

    i knoe where im goin shoppin at!.

    your the man jimmy

    ATL DAsquad Member #9

  26. #26
    Certified Gearhead
    Join Date
    May 2009
    Location
    southside
    Age
    40
    Posts
    820
    Rep Power
    17

    Default

    bump for boost

  27. #27
    rolla rollin
    Join Date
    Aug 2007
    Location
    middle GA
    Age
    34
    Posts
    4,818
    Rep Power
    25

    Default

    Quote Originally Posted by jjmastertech View Post
    That is a nice unit. The pump in the tank moves a lot of water and with it being inside it makes for a clean install.



    I can mail the key tags out if you would like one.

    can i just stop by i live off forsyth rd

  28. #28
    Southern Speed
    Join Date
    Apr 2005
    Location
    Macon
    Age
    37
    Posts
    3,532
    Rep Power
    25

    Default

    yes
    11.7@116- All motor H2B Integra

  29. #29
    Why so serious? greasemunkey's Avatar
    Join Date
    Aug 2006
    Location
    Newnan
    Age
    36
    Posts
    2,828
    Rep Power
    22

    Default

    wiseco! lol nice stuff, good prices too

  30. #30
    IA Sponsor JJSPEC Racing's Avatar
    Join Date
    Nov 2006
    Location
    www.jjspec.com Macon, Ga
    Posts
    1,619
    Rep Power
    23

    Default

    Quote Originally Posted by J-ROCK View Post
    can i just stop by i live off forsyth rd
    Of course! Stop by and get a tag and see what is happening!


    JJSPEC RACING - Central Ga's source for performance parts,
    fabrication, tuning, general repair and a whole lot more! 478 621 5000


  31. #31
    FiveSpeedin, fuck. JDMGRNAV6's Avatar
    Join Date
    Apr 2008
    Age
    37
    Posts
    1,796
    Rep Power
    20

    Default

    badassmfshitttt

  32. #32
    Certified Gearhead
    Join Date
    Jan 2008
    Location
    mcdonough
    Age
    36
    Posts
    397
    Rep Power
    18

    Default

    you have a pm sir

  33. #33
    IA Sponsor JJSPEC Racing's Avatar
    Join Date
    Nov 2006
    Location
    www.jjspec.com Macon, Ga
    Posts
    1,619
    Rep Power
    23

    Default

    You have a reply


    JJSPEC RACING - Central Ga's source for performance parts,
    fabrication, tuning, general repair and a whole lot more! 478 621 5000


  34. #34
    rolla rollin
    Join Date
    Aug 2007
    Location
    middle GA
    Age
    34
    Posts
    4,818
    Rep Power
    25

    Default

    Quote Originally Posted by jjmastertech View Post
    Of course! Stop by and get a tag and see what is happening!
    cool man sounds good ill proably swing by sometime tomorrow around 10 or so

  35. #35
    Dub R crew member#12 jcs's Avatar
    Join Date
    Jul 2007
    Location
    roberta
    Age
    36
    Posts
    3,383
    Rep Power
    24

    Default

    hmmm really wantin the piston rod combo for a build.....

  36. #36
    IA Sponsor JJSPEC Racing's Avatar
    Join Date
    Nov 2006
    Location
    www.jjspec.com Macon, Ga
    Posts
    1,619
    Rep Power
    23

    Default

    Quote Originally Posted by -S Double C- View Post
    bump for a good guy, what are you putting back in the integra Jimmy?
    I have a S372 a ported head, a sleeved block, and some badness in the bottom end. There is a guy in North Carolina that made 735 on a SOHC with something similar. Hopefully I will make a little more power and not have to worry about the block


    JJSPEC RACING - Central Ga's source for performance parts,
    fabrication, tuning, general repair and a whole lot more! 478 621 5000


  37. #37
    where my vtec go
    Join Date
    Nov 2008
    Location
    Middle GA.
    Age
    38
    Posts
    435
    Rep Power
    17

    Default

    Quote Originally Posted by jjmastertech View Post
    Good. How about you?
    tryin hard and gettin no where, lol tryin to get ej1 back on the streets, just tryin to get it painted first. then gonna start saving to build another motor

  38. #38
    IA Sponsor JJSPEC Racing's Avatar
    Join Date
    Nov 2006
    Location
    www.jjspec.com Macon, Ga
    Posts
    1,619
    Rep Power
    23

    Default

    Good luck with it. Sounds like it is going to be nice!


    JJSPEC RACING - Central Ga's source for performance parts,
    fabrication, tuning, general repair and a whole lot more! 478 621 5000


  39. #39
    Next adventure is... Just_CHill's Avatar
    Join Date
    Aug 2007
    Location
    Cobb County
    Age
    39
    Posts
    5,656
    Rep Power
    27

    Default

    pm'd

  40. #40
    CLEANEST ironDUKE
    Join Date
    Dec 2009
    Location
    Gainesville, GA
    Age
    36
    Posts
    188
    Rep Power
    16

    Default

    bump... got a good H series EGR valve and a ps pump?

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!