What the...?

[DVSRX-7]

its not driving yet but its running so im extremely happy. all the hard work paid off. my first swap too. lol couldnt do it without my buddies though. :goodjob:

as far as i know this is one of the first K-swapped BF chassis 323's in the states. (just going by researching internet and forums..lol)


Might be the only one in the world with this swap. But why isn't it driveable yet?

[DeeAOne]

im waiting on a custom cable to hydro clutch setup that was made for me. its being shipped from canada hopefully in the next few days.

and there is one known 1987 KLZE swapped one in New Zealand. lol

[SlenderEG6]

dont u mean hydro to cable i mean u are repacing the slave with a cable?? right??

[Catnip]

dont u mean hydro to cable i mean u are repacing the slave with a cable?? right??


About ready to do some more graffiti? ;)

[DeeAOne]

dont u mean hydro to cable i mean u are repacing the slave with a cable?? right??well i guess you could say that too. i was talking about the bracket joining the cable clutch pedal to the hydro release fork.

call me.

[SlenderEG6]

About ready to do some more graffiti? ;)

U KNOW MY NUMBER :)

[AV8ter]

You following the build on FF.com? Dude has one going in his festiva(first document build of a v6 Festy), and it is funny because you guys are like neck and neck with your builds. I think he is about to roll it out of the garage like today or something.


Looks good. Builds like yours make me seriously want to go find another festiva and build one up.

[.:Stirfry:.]

whats the gap on the plugs?

[DeeAOne]

You following the build on FF.com? Dude has one going in his festiva(first document build of a v6 Festy), and it is funny because you guys are like neck and neck with your builds. I think he is about to roll it out of the garage like today or something.


Looks good. Builds like yours make me seriously want to go find another festiva and build one up.yeah hes on clubprotege too. hes the one thats making my custom piece. lol it was his solution for the same problem.

do it!


whats the gap on the plugs?not sure. i bought some BKR7e's though so whatever gap is on those right out of the box.

[AV8ter]

Believe me, I would. It is just a full time job trying to find a festiva that is worth-while anymore. I wish I didn't sell my cream-puff 88L a couple years back for that very reason.

[DeeAOne]

ok so i got the temp gauge working. it was just that i had not let it run long enough for the temp gauge to even move..lol. but right as it got to running temp and i shut it off, i leaned over the engine bay to release the pressure off the cap and my custom top hose busted off the reducer and sprayed hot coolant all over my face, eyes, and mouth. needless to say im in pain. so now i sit here and type to you will aloe all over my face. lol

but i learned my lesson. when you think its tight enough, tighten it more.

[EL42]

ok so i got the temp gauge working. it was just that i had not let it run long enough for the temp gauge to even move..lol. but right as it got to running temp and i shut it off, i leaned over the engine bay to release the pressure off the cap and my custom top hose busted off the reducer and sprayed hot coolant all over my face, eyes, and mouth. needless to say im in pain. so now i sit here and type to you will aloe all over my face. lol

but i learned my lesson. when you think its tight enough, tighten it more.

congrats on the progress...so next time i see you,you'll have on a Phantom of the Opera mask? damn dude,be a lil' more careful.

[DVSRX-7]

ok so i got the temp gauge working. it was just that i had not let it run long enough for the temp gauge to even move..lol. but right as it got to running temp and i shut it off, i leaned over the engine bay to release the pressure off the cap and my custom top hose busted off the reducer and sprayed hot coolant all over my face, eyes, and mouth. needless to say im in pain. so now i sit here and type to you will aloe all over my face. lol

but i learned my lesson. when you think its tight enough, tighten it more.


LOL
NewB move man...

[DeeAOne]

hopefully not. lol i reacted fast enough to cover my face with my hands and run away..probably would have been a lot worse if it wasnt for that.

[DeeAOne]

this was done last night but i didnt get a chance to post until now.

and let me say now, IM NOT A WELDER. my buddy was sick so i went ahead and gave it a shot myself. lol

http://i71.photobucket.com/albums/i143/Yankee4life91/SDC10886.jpg

http://i71.photobucket.com/albums/i143/Yankee4life91/SDC10888.jpg

the finished product.

http://i71.photobucket.com/albums/i143/Yankee4life91/SDC10892.jpg

and a preview of whats to come for exhaust...i see pissing people off in my future.

http://i71.photobucket.com/albums/i143/Yankee4life91/SDC10890.jpg

[mushroom_toy]

I Loled at straight pipe. Welding looks like itll serve its purpose to me. :) Get is driveable. :)

[DeeAOne]

following the tunnel is for girls.. :gay: and the oil was from the previous engine. rear main seal and oil pan gasket went at the same time. lol

next week is the ETA. my bracket was shipped today from ontario. :yes: :yes:

[AV8ter]

following the tunnel is for girls.. :gay: and the oil was from the previous engine. rear main seal and oil pan gasket went at the same time. lol

next week is the ETA. my bracket was shipped today from ontario. :yes: :yes:

Very excite! Things is going to be so much fun to drive.......... Better get your arms ready for all that torque steer lol.

[DeeAOne]

here are a few pictures. nothing special just little work now. finally. :)

tie rod ends. same part but one box is much bigger for some reason...:thinking:

http://i71.photobucket.com/albums/i143/Yankee4life91/SDC10896.jpg

mmmmm new bushings...never had some before. lol

http://i71.photobucket.com/albums/i143/Yankee4life91/SDC10897.jpg

and the other already installed. i remembered that was supposed to be taking pictures halfway through the job.

http://i71.photobucket.com/albums/i143/Yankee4life91/SDC10900.jpg

dont have a picture of the finished product but the wheels sit nice and straight. just need new tires now.

[FasTech]

Damn, can't believe its coming along so fast. Be sure to let me know when you get it running. I'll make a trip out to WR to check it out.

[DeeAOne]

definitely will do. :yes:

no more stupid toe and camber.

http://i71.photobucket.com/albums/i143/Yankee4life91/SDC10905.jpg

this side could probably use one turn back in.

http://i71.photobucket.com/albums/i143/Yankee4life91/SDC10906.jpg

and just a side shot for shits and giggles.

http://i71.photobucket.com/albums/i143/Yankee4life91/SDC10907.jpg

[tdurr]

omgbbq! it needs to live. just sayin.

[jdm-civic]

i like

[Catnip]

so now i sit here and type to you will aloe all over my face. lol

That's racial karma for the whole, "us black folk can't sunburn" saying. You're taking one for the team, goodjob... lolol <3

Hit me up soon when you're free, I'll come out and see it.

[jdm-civic]

can we sunburn tho? ive never had a case of sunburn.......

[DeeAOne]

That's racial karma for the whole, "us black folk can't sunburn" saying. You're taking one for the team, goodjob... lolol <3

Hit me up soon when you're free, I'll come out and see it.off tomorrow. free until 6 or so. hit me up.

[DeeAOne]

its here!


http://i71.photobucket.com/albums/i143/Yankee4life91/SDC10908.jpg

http://i71.photobucket.com/albums/i143/Yankee4life91/SDC10909.jpg

what its looks like when done. this is on the guys trans that made it for me.

http://i248.photobucket.com/albums/gg162/damkid_photos/1215091411-01.jpg

and i took it out for a quick ride around the block. its got a pretty bad vibration coming from what feels like the front left. im hoping its a shot wheel bearing.

but i did give it a little juice. 1st is useless, granny shifted and spun again. feels soo good. lol

[jdm-civic]

congrats!!!

[tdurr]

wait... did u put that bracket in then drive?

[DeeAOne]

yes...that was the last part i was waiting for. it came in today. lol


congrats!!! thanks.

[Catnip]

So, that's why you called at almost 12 o'clock? LOL. Congrats man, I'll come check it out tomorrow. I was busy today.

[DeeAOne]

oh tonight? no i was calling to ask for logans number. joe(white s13) needs it. and thanks.

ive got to figure out the vibration though. i dont want to really dd it until its solved. ive got work tomorrow. :(

[Catnip]

oh tonight? no i was calling to ask for logans number. joe(white s13) needs it. and thanks.

ive got to figure out the vibration though. i dont want to really dd it until its solved. ive got work tomorrow. :(


Should've texted me. Sometimes I'm driving or in a movie or something and can't answer. lol.

[DeeAOne]

i think that i might have figured out the vibration problem. i thought it was my wheel bearing but i asked around on another forum and i think it could be my axle binding up.

for those of you who dont remember this is what it looks like. squished.
http://i71.photobucket.com/albums/i143/Yankee4life91/SDC10764.jpg

i bought a kia sephia 1.8L BP axle off the forums. this axle is about an inch shorter but it supposed to have the same splines on both ends. an inch might not sound like much but could be all the difference! hopefully it fixes the problem! :goodjob:

[Catnip]

Raising it up doesn't help any? Thought you had ordered specially made axles?

[DeeAOne]

not yet. im going to get it running with these "temporary axles" first. then i can drive it while i save up for a nice set. for it to work it would probably have to be higher than stock height and thats not going to happen. lol

[JITB]

i think that i might have figured out the vibration problem. i thought it was my wheel bearing but i asked around on another forum and i think it could be my axle binding up.

for those of you who dont remember this is what it looks like. squished.
http://i71.photobucket.com/albums/i143/Yankee4life91/SDC10764.jpg

i bought a kia sephia 1.8L BP axle off the forums. this axle is about an inch shorter but it supposed to have the same splines on both ends. an inch might not sound like much but could be all the difference! hopefully it fixes the problem! :goodjob:


dam man i was just about to say that you might be a receiver of the axle binding award... its crazy that some people have this problem and some dont.....

[DeeAOne]

well i will definitely let you guys know if it works out or not. if it still does it i probably have a shot wheel bearing.

[Josh...]

Why don't you just jack up the car, lock the steering wheel and see is the wheel moves left and right?

[DeeAOne]

im sure the bearings have seen better days, but as bad as it shakes, it has to be more than just the wheel bearings. they do have some side to side movement.

[.:Stirfry:.]

kick ass bracket.

[DeeAOne]

woot! it works! no more vibration whatsoever. BUT, i have another issue. i was just driving after a little first gear fun when all of the sudden it started to miss. not to bad but when its under load i can hear/feel it. i immediately shut it off and coasted into my driveway. pulled the plugs and this is what i found. every single cylinder looks lean.

http://i71.photobucket.com/albums/i143/Yankee4life91/SDC10915.jpg

http://i71.photobucket.com/albums/i143/Yankee4life91/SDC10919.jpg

i really need to get the CEL hooked up so i know what codes im throwing. im thinking a bigger fuel pump might be in my future.

i just hope i didnt do any major damage. what do you think IA?

[JITB]

Distributor! CHECK IT!

[DeeAOne]

wow, number 6 wire was definitely just chilling on the trans. :doh:

so ive been breaking it in all day and so far no problems. been driving slow to let everything seal up. finally :goodjob:

[Catnip]

wow, number 6 wire was definitely just chilling on the trans. :doh:

so ive been breaking it in all day and so far no problems. been driving slow to let everything seal up. finally :goodjob:

Win! Congrats again!

[DeeAOne]

thanks. it feels good.

things left to do:
-CEL
-VC leak
-axle seal (could possibly be from a kia axle being in a mazda trans)
-alignment, possibly wheel bearings
-insurance. lol

[punkr6]

thanks. it feels good.

things left to do:
-CEL
-VC leak
-axle seal (could possibly be from a kia axle being in a mazda trans)
-alignment, possibly wheel bearings
-insurance. lol

Congrats bro. Very nice set up you got now....

[DeeAOne]

thanks man. reps. its not a street monster but i think it will be able to hold its own now. its come a long way from 72 ft lbs of tq. lol

[JITB]

make sure you mount the harness on the firewall man, dont want it to burn up like mine did...lol

[DeeAOne]

LMAO, before i went for the first drive i thought of you, and ziptied it to some misc brackets for the old a/c lines. its works for now.

[JITB]

LMAO, before i went for the first drive i thought of you, and ziptied it to some misc brackets for the old a/c lines. its works for now.

good!!... i only got 1 drive out of mine... looks like you beat my record already...lol

[DeeAOne]

so far about 3 trips of more than 10 minutes so im happy.

[Revmaynard]

Hell yes! This is officially epic! Congrats dude!

[DeeAOne]

haha thanks man. i dont think my swap gets lots of attention on here but it feels good to see some appreciation. :)

now i need to sit down and figure out how much i have spent so far and still not done yet, lol

[slostang]

congrats man. i want a ride in it when its all done.

[DeeAOne]

roughly 50 miles on the swap and no major problems! woot! :bump:

my ignition switch got stuck today though at the gas station so i took my column apart right there at the pump. talk about on site maintenance. lol

[DVSRX-7]

Any more pics?

Remember......... Do not sell the car LOL

[JITB]

u gonna drive up to import alliance this weekend? it will be the ultimate test!

[DeeAOne]

Any more pics?

Remember......... Do not sell the car LOLno. but im off tomorrow so i may throw some quick ones up. been driving around with no hood at the moment...what a ricer right? lol

i wouldnt get anywhere near what ive put into it if i did so i dont think i will. lol



u gonna drive up to import alliance this weekend? it will be the ultimate test!im not that confident in it yet. im getting an alignment thursday if my paycheck goes through.

[JITB]

no. but im off tomorrow so i may throw some quick ones up. been driving around with no hood at the moment...what a ricer right? lol

i wouldnt get anywhere near what ive put into it if i did so i dont think i will. lol


im not that confident in it yet. im getting an alignment thursday if my paycheck goes through.

it has to be done!!

[SKarpenz]

This is a VERY cool build man. I've owned way more MX6's than I care to admit so I'm pretty familiar with Mazda piston engines. I've always found the KL to be a very lacking engine in terms of performance considering it is a 2.5L V6 but I know how much fun they can be (in an MX6 which is heavier!). I can imagine this thing is an absolute blast to drive. NOW IT NEEDS A TURBO. :D

[DeeAOne]

it has to be done!!
the first long trip will most likely be a V meet. lol


This is a VERY cool build man. I've owned way more MX6's than I care to admit so I'm pretty familiar with Mazda piston engines. I've always found the KL to be a very lacking engine in terms of performance considering it is a 2.5L V6 but I know how much fun they can be (in an MX6 which is heavier!). I can imagine this thing is an absolute blast to drive. NOW IT NEEDS A TURBO. :Dappreciate it dude! dont be ashamed of them. they can be real sleepers that most dont know about. so far its pretty fun to drive. i dont drive it hard, yet. ;)

[DeeAOne]

ive got some fine tuning to do obviously on ignition timing or tps. if i did my math right im getting 14mpg. fuck.

[mushroom_toy]

Then get your 14mpg to ImportAliance Sun. and all will be ok. :)

[SKarpenz]

I have a lifted 1983 K10 that gets around 14mpg bro! Fix yo shit.

[Elbow]

Hell my Miata got under 10mpg. lol

[EL42]

i better see u tomorrow,fool

[DeeAOne]

one day it will be up there.

i finally got around to swapping out my leaking rear valve cover. i took the other one off the mx6. and while i had the manifold and stuff off i did a little painting. so here is the bay as of today. :)

http://i71.photobucket.com/albums/i143/Yankee4life91/SDC10927.jpg

http://i71.photobucket.com/albums/i143/Yankee4life91/SDC10928.jpg

http://i71.photobucket.com/albums/i143/Yankee4life91/SDC10929.jpg

[SKarpenz]

Looking good man, I love this build. If I find a deal on a shitty old 323 I'll be contacting you, haha.

[SKarpenz]

Have you weighed the car by any chance with the KL in it? IIRC those 323's only weigh a shade over a ton in factory trim.

BTW everyone I have shown this car to online is AMAZED at how much room is under the hood with the V6 in it.

[DeeAOne]

Have you weighed the car by any chance with the KL in it? IIRC those 323's only weigh a shade over a ton in factory trim.

BTW everyone I have shown this car to online is AMAZED at how much room is under the hood with the V6 in it.before the swap it weighed 2250 with a half a tank and a system. im hoping the aluminum KL will cancel out the old iron block b6 and it will still weigh roughly the same.

[Sammich]

DAMN! u flipped the script lol sorry...but that shit is fire under the hood man

[blackshine007]

I wouldn't mind seeing this sometime.... I'm interested in how well it's running.

[DeeAOne]

it needs some work before i drive it out of town. i stay in the warner robins/macon area for now. both front wheel bearings are shot(junkyard hubs), and some other little misc. things need to be fixed.

it is running good though. about 400 miles on it so far.

[blackshine007]

So when's the video clip coming?

[HillClimbGuy]

very nice man I would love to see this in person.

sup blackshine you don't go to the meet any more?

[.:Stirfry:.]

its still slow. . . . . . .

[DeeAOne]

Just when i thought the swap was going well, Kaboom.

Spun a rod bearing just cruising along out of nowhere. It was not even knocking the day before. FML...

[SKarpenz]

Damn bro. Wtf.

[jdm-civic]

damn that sucks dude

[DeeAOne]

Idk man. I've never seen anything like it. You could not hear any kind of knocking until yesterday. I thought it was a bad valve because it was so faint. so I was driving home to park it last night and it happened.

I'll post some pictures later.

[JITB]

well a friend of mine has a spare k8 with a blown headgasket... im sure he will give to you for free, or spare change! if u need something to put in it!

[blackshine007]

Which bearing did you spin?

[DeeAOne]

Thanks Joe. I might hit him up on that offer. I wanted to build a Klde/ze hybrid anyway but not this soon. Thats the plan right now.

EDIT: didn't see it has a blown HG. I have one of those in my driveway in the mx6 lol. I want a zero mile rebuild.

Blackshine it was cylinder number 6. Looking up at the bottom end it was the far left rod.

[blackshine007]

Yeah, a weak oil pump will do that. I probably might wanna consider changing mine out sometime. I don't feel like spending $160 for a new one, though :no:

[DeeAOne]

That might explain the lifter tick...my head might have not been getting enough oil. I thought it was just common with Mazda heads because my old b6 did it too.

I knew I should have finished hooking up my oil pressure gauge. Had one in the car ready to go but just had not ran the nylon line yet.

[.:Stirfry:.]

damn bit. you need to lay off the gas, and stop tryna race err one. . . lol/

jk.

[DeeAOne]

Whatever I babied it all the time except for the other night on Houston lake. Lol

[EL42]

what? aww man. so it's official,i have to travel to see the car instead of waiting for u to make it to the v.

[DeeAOne]

Nah it will be back on the road asap. It's not like I have to do the swap over again. Just get some new internals. She will be back and better than before. :goodjob:

[DeeAOne]

current state. ready to pull. again. lol

http://i71.photobucket.com/albums/i143/Yankee4life91/SDC10935.jpg

[DeeAOne]

man, no posts since last one. that hurts IA. lol

well anyway the swap should be here in the morning so i pulled the DE today and painted my bay. i got some overspray on the weather stripping but ill take it off and fix it later. plain and simple, clean. :)

http://i71.photobucket.com/albums/i143/Yankee4life91/SDC10940.jpg

[B20B!Ithink?]

nicccceeeeee loks good dude!
cant wait to se that KLZE in dat bit!

[DeeAOne]

thanks...white bays taking over warner robins! lol.

[SKarpenz]

Good deal man, if its any consolation my VH spun a bearing too last week. Yours is coming together faster than mine though, haha.

[DeeAOne]

lol sucks bro. im trying to get my car back on the road asap. heres a picture of the ZE, it only looks the same as a DE.. :ninja:

about to go drop it in as we speak!

http://i71.photobucket.com/albums/i143/Yankee4life91/SDC10942.jpg

[mushroom_toy]

YES DO EET. AND HURRAY....I must see.

[SlenderEG6]

pure beauty

[94ej2]

mmmhmm. wheres thank you boss for talking you into this?

[blackshine007]

I'm jealous that yours came with a compressor and alternator!!!!! What else did it come with?

[DeeAOne]

pretty much all the accessories that you would need, p/s pump too.. trans was $150 extra but i didnt need one.

http://i71.photobucket.com/albums/i143/Yankee4life91/SDC10949.jpg

should be firing it up tomorrow. lets all pray for me. lol

[DeeAOne]

http://www.youtube.com/watch?v=UD18BG0p4x0

a quick 2nd gear pull. dont make fun of my miss of 3rd. i need new linkage lol. im only making about 160hp right now because im still on a DE ecu. once i get a ZE ecu ill be making the full 200hp.

[mushroom_toy]

^I Love you....no homo...man we gotta get together and get some shots. :)

[DeeAOne]

im down with that man. i need some new suspension/brake parts but after those ill definitely be making the journey to the V. :goodjob:

[JITB]

oh shit!! you are a BF superstar! good stuff man.. you will go down in history! :)

[DeeAOne]

Lol :goodjob:

[.:Stirfry:.]

slow

[mushroom_toy]

The V is fail.

[Sol-Badguy]

The V is fail.

So's yo face!

[EL42]

http://www.youtube.com/watch?v=UD18BG0p4x0

a quick 2nd gear pull. dont make fun of my miss of 3rd. i need new linkage lol. im only making about 160hp right now because im still on a DE ecu. once i get a ZE ecu ill be making the full 200hp.
damn that was the "BLARE WITCH" of car vids. i was scared and couldn't understand what i was seeing. lol

[Siverprobegt]

http://www.youtube.com/watch?v=UD18BG0p4x0

a quick 2nd gear pull. dont make fun of my miss of 3rd. i need new linkage lol. im only making about 160hp right now because im still on a DE ecu. once i get a ZE ecu ill be making the full 200hp.

Get a chip for the de ecu.Also dont use FRAM oil filters..There known for causing oil problems..My bro oil light was flicking @ idle,turn out it was the fram oil filter.You need a lightweight flywheel in that car!!!lol

[DeeAOne]

yeah i do have a fram..guess ill look into getting a new one. thanks. and where would i get my chip put in at? im new to that stuff..

im using an oem mx3 K8 flywheel. i need to hook up an oil pressure gauge so i dont have a repeat of the DE.

[Siverprobegt]

mx3 flywheel is pretty good.Check out probinator chip on probetalk or mx6.com...U aint feeling shit,without the proper ecu!!!LOL

[SKarpenz]

Get a chip for the de ecu.Also dont use FRAM oil filters..There known for causing oil problems..My bro oil light was flicking @ idle,turn out it was the fram oil filter.You need a lightweight flywheel in that car!!!lol

Everyone knows someone who has had trouble with some kind of oil filter. Fram does not make bad oil filters. You can get higher quality ones, but running Fram won't hurt a damn thing.

[Siverprobegt]

I know 5 people that had problems with fram filters.Thats enough for me..

[SKarpenz]

Again, everyone knows someone who has had trouble with some kind of oil filter. Unless you are running some ridiculous oil pressure (200+psi?) then Fram is as good as any other. I watched a demo of a Royal Purple oil filter last to a burst pressure of like 450psi. I lawl'd all over myself.

EDIT

I don't want to start a shit storm so I'll stop.

[DeeAOne]

http://cgi.ebay.com/ebaymotors/Ford-Probe-Mazda-MX6-626-KLZE-Performance-Chip-Eprom-GT-/260593482769?cmd=ViewItem&pt=Motors_Car_Truck_Parts_Accessories&hash=item3cac94fc11

do you guys think that is legit? or just one of these fakes..?

[SKarpenz]

More than likely its a fake. Stick with what Siverprobegt suggested. I have bought and used a couple of Probinator's chips and his are the real deal.

[DeeAOne]

alright thanks for the info.

went and did a little driving. everything seems to be ok except one thing. i checked the coolant when i got home and there seems to be little copper colored pieces floating in it..im going to do a flush and see if they come back. i havent flushed it since the got the new motor. any ideas...?

[SKarpenz]

Sounds like someone has used some type of radiator/block/head sealant in the cooling system. Flush it really well, and maybe more than once. Good luck bro.

[blackshine007]

You should be quicker than this....

http://www.youtube.com/watch?v=qfYeDu50DMo


BTW, what year KLZE did you order? I see you got the straight neck. It's been proven that the straight neck makes more top end while the curve neck makes better midrange. If you happen to hear a ticking noise coming from the engine, pull over immediately and check it out.

[Catnip]

If you happen to hear a ticking noise coming from the engine, pull over immediately and check it out.


... uh oh...

[blackshine007]

The ZE's have weak valve springs and excessive revving will crack them. The noise will sound similar to a stuck lifter. It happened to me. I replaced my valve springs out with the slightly stronger DE springs. No other valvetrain issues since.

[DeeAOne]

I had really bad lifter tick on the DE. Could have possible been a spring because the exhaust sounded like a Subaru when it did tick under the hood. And it never really went away..

No tick on the ZE except first start up so I assumed that was just the lifter not lubricated yet.

And i'm insure of the year..I think it's got much more in it though. I found a great deal on a kl31 ecu and je50 vaf combo. That I will be picking up this week.

[Siverprobegt]

it will run a little rich with that ecu ,but it will be quicker than how it running right now!Let me know when you install it!

[.:Stirfry:.]

you put yo hood back on yet. . .?

[DeeAOne]

yeah hood and front end is back on.

Siverprobegt, is the kl36 ecu any better..?

[Siverprobegt]

kl36 is a jdm ze ecu..Anything is better than the 1.8 ecu,lol..GET IT!!

[DeeAOne]

Oh so the kl31 is the jdm k8 ecu..? I knew the je50 was the k8 vaf but didn't know about the ecu.

[Siverprobegt]

kl31 and kl36 are jdm 2.5 ecu..Am running a kl36 myself..What ecu do you have???

[Siverprobegt]

JE50 also goes with those 2 jdm ecu's

[DeeAOne]

I'm running both KL01 units right now from a 626. Just confirmed with the seller, it's a KL31 and JE50 for sure that I'll be getting.

[Siverprobegt]

what Air flow meter your running right now with the kl07 ecu??If you dont get it let me know.You can order a chip an ill do the ecu for u! If u didnt live so far,me and blackshine007,whould of come an help u out!

[DeeAOne]

im using a KLO2 aif flow meter.

and ill definitely hit you up if i dont get it.