gauges

[hmong_Spec]

my brother integra gauge for the temp. is not working. any idea. its a 1993 integra.

[eraser4g63]

very rarely is it actually the gauge more than likely it the coolant temp sensor or a wire.

[hmong_Spec]

where;s the sensor located at.


very rarely is it actually the gauge more than likely it the coolant temp sensor or a wire.

[eraser4g63]

Not a clue i know jack shit about Hondas. but typically speaking near the thermostat. or on the side of the block.

[big mac]

It's down to the right from the dizzy a littlt near thermostat

[eraser4g63]

See there ya go, I was close.

[hmong_Spec]

haha thanks. so its most likely that sensor?

[hmong_Spec]

i mean like the gauge temp. it doesnt move at all.

[eraser4g63]

99% of the time yes. And chances are if it has not been replaced it needs to be, they are also fairly cheap. If it is not that it is going to be a wire issue.

[88NaCivic]

Wire going to the sensor is pulled off easy check for it

[hmong_Spec]

aigh guys, will check when i get home. thanks. REPPED