how to do an engine wire tuck

[chaseamundo]

i want to clean up my bay a little....or alot. what all do i need to do a full wire tuck and how long would it take. also how could i go a bout doin this haha?

[jcs]

if you look on google there are a couple of write-ups on how to do it.....i plan on doing mine here in another week.GL and i hope i helped a little bit.

[Barefoot]

simple and easy

http://rywire.com/store/replacement-milspec-dseries-harness-p-254.html

[speedminded]

With a name like chase you should be born to know how, haha!

[OG-Skinny]

chasebays for days man..

[chaseamundo]

haha yea. i live here in b ham and i acctually hung out with him a couple times b4 i realized who he was haha . i knew that would come up haha

[Barefoot]

must be a convo over my head.

[speedminded]

must be a convo over my head.http://www.chasebaysonline.com/


I miss Brewers EK replica...err was Justins. My front bumper and ITR lip is from Brewers car. Small world lol!

http://www.chasebaysonline.com/wp-content/uploads/2009/03/baymotor1.jpg

[Barefoot]

got yah

[Homer Simpson]

jst keep in mind to do a complete wire tuck, you're gonna have to ditch ac and ps.

[Barefoot]

jst keep in mind to do a complete wire tuck, you're gonna have to ditch ac and ps.y so

[speedminded]

jst keep in mind to do a complete wire tuck, you're gonna have to ditch ac and ps.lol! neither are wires.

[Barefoot]

lol! neither are wires.yah i was sitting thinkin ok at the most its 5 wires cant be all that hard to hide.

[Homer Simpson]

yah i was sitting thinkin ok at the most its 5 wires cant be all that hard to hide.


yea, I understand what you mean. But people that do wire tucks on b-series usually want to go all the way to get their engine bay super clean looking. I GUESS you don't have to get rid of PS and AC, but the AC lines, the compressor as well as the condenser (if its a half radiator) clutters up the engine bay along with the power steering pump and resovoir. You ain't got to remove, but i've never seen a Honda with a complete wire tuck have ac nor power steering.

[Barefoot]

yea, I understand what you mean. But people that do wire tucks on b-series usually want to go all the way to get their engine bay super clean looking. I GUESS you don't have to get rid of PS and AC, but the AC lines, the compressor as well as the condenser (if its a half radiator) clutters up the engine bay along with the power steering pump and resovoir. You ain't got to remove, but i've never seen a Honda with a complete wire tuck have ac nor power steering.that like cats who boost and keep ac and ps its all a matter of personal preference.

[chaseamundo]

hmmm ill give that some thought haha. so basically i have to get a new wiring harness and rewire throught that? thats like the gist of it?

[Elbow]

Wire tucking is so dumb, don't do it, it makes any wiring issues a pain to fix because you stored it all away.

[ground_shaki]

isnt there some wires that you dont want to cut like injector wires. if you wanted to make them shorter.