View Full Version : need help map sensor problem
FRYLOCK
06-05-2009, 11:08 AM
i have a 00 integra with a jdm b20 in it im running and obd 1 ls ecu
i check my cel for codes.
i came out with number 3
MAP sensor
so i changed the map sensor disconnected the battery and reconeccted light still comes on for samde thing?
Barefoot
06-05-2009, 11:47 AM
test the sensors if they work fine check your wiring.
FRYLOCK
06-05-2009, 11:55 AM
I label my sensors the map sensor checked out fine I think its conv harness or ecu
Barefoot
06-05-2009, 12:00 PM
I label my sensors the map sensor checked out fine I think its conv harness or ecuhow did u test the map
Captain-Obvious™
06-05-2009, 02:10 PM
I have a spare map if you end up needing it mike
scttydb411
06-07-2009, 03:16 PM
had anything changed/work done recently just before the code started? a lot of times when people do a swap, change tb, or intake the map and tps get mixed up since they have the same plug. the map you changed, was it new or used...are you sure the one you change was good? if so, there could be an issue with the wiring.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.