Which ECU should i use?

[DaRussian]

OK i have a 94 del sol and im putting a OBD2 b18b1 swap into it. the engine harness is the obd2 b18b1 harness and it plugs right into the del sol dash harness. which ecu should i use?

[Tensa_Zanget]

OK i have a 94 del sol and im putting a OBD2 b18b1 swap into it. the engine harness is the obd2 b18b1 harness and it plugs right into the del sol dash harness. which ecu should i use?

hmm.. not completely sure but since your car is a 94 i figure that it is a OBD1 and the engine is obd2. So try to make the engine compatible to your car not your car compatible to the engine. What i would do is get a obd1 ls ecu and obd1 dizzy and a ecu jumper. Hope that helps.:goodjob:

[b17a1db2]

the ecu you need is a P75 or a PR4.

[Tensa_Zanget]

the ecu you need is a P75 or a PR4.

yup those are from obd1 ls ecu. As for the PR4 try to get the one that say PR4-A11 because they are the only one that are manual with "OBD1" as for the rest of the PR4 i believe are usually OBD0.

[scttydb411]

try an obd1 p75 first...should be plug and play as long as you kept the obd1 harness inside the cabin and all the other wiring is correct under the hood.

[DaRussian]

ok thanks guys

[Tech5]

OBDI

OBDII will not work! run right

[2.25teg]

PO5 PO6 an Get it chipped