PDA

View Full Version : little help



RememberingNever
09-05-2005, 09:40 PM
ya i posted in the stereo section but hey maybe ill get an answer here...

amp is bein a bastard...

i connect everything you know power to battery, audio wire from head unit to amp, speaker wires to subs...but then when i connect the ground wire anywhere, the little green power light on the amp turns off...

any advice would be greatly appreciated
__________________

scttydb411
09-06-2005, 02:01 AM
constant 12v to batt (use large gauge wire for this/fused).
remote turn on from head unit (if turning on more than 1 amp a relay is good to use).
rca's (self explanatory).
speaker leads (self explanatory).
ground (to a good exposed metal surface of the body).

if that doesn't work you've got a bad amp or doing it wrong.

Allshow97
09-06-2005, 10:52 AM
You best bet is to take a self tapping sheet metal screw and find you a spot that isn't going to intrude on anything else and tap your ground into the body somewhere that way you have a good solid ground connection if that doesn't work reply here and I will see if I can help you further. Also check your fuses make sure none are blown.

RememberingNever
09-06-2005, 03:41 PM
haha thanks for the input i found a 1 inch gap in the metal on the remote wire n there wasnt anything wrong with the insulation...weird but problem solved :)

eViLMunkey
09-06-2005, 04:54 PM
awesome.. that sux man but good thing you figured it out...