what cams are these

[Samhonda95]

we have several set of stock b-series vtec cams. i've identified all of them except 1 set. ive looked all over. they aren't on this site
http://www.jdmuniverse.com/forums/how-tos-tutorials/77400-identify-b-series-vtec-cams.html

or this one
www.ff-squad.com/tech/temp/VtecCams.htm (http://www.ff-squad.com/tech/temp/VtecCams.htm)

here they are
http://img231.imageshack.us/img231/653/camsug0.jpg (http://imageshack.us)
http://img231.imageshack.us/img231/camsug0.jpg/1/w1000.png (http://g.imageshack.us/img231/camsug0.jpg/1/)


:thinking: :thinking: :thinking: :thinking: :thinking: :thinking:

[1SOL2NV]

they look like b17 cams to me ??

[Samhonda95]

if you look at the b17's they have 2 small grooves. these have 1

[southside]

If it aint aftermarket who cares?

[Samhonda95]

for an all oem built..........i want to know


SO....GTFO!

[southside]

Oem built ..... you GTFO

[Samhonda95]

Oem built ..... you GTFO

gsr block
gsr rods w/arp bolt
.20 ctr pistons
ported b16 head
00 itr cams
itr intake manny
itr throttle body
itr header
itr flywheel
92-93 cable gsr tranny

in a 91 ef hatch

less than 1500 to build (since i have most of this stuff) and i think it will make nice power and be fun

[southside]

gsr block
gsr rods w/arp bolt
.20 ctr pistons
ported b16 head
00 itr cams
itr intake manny
itr throttle body
itr header
itr flywheel
92-93 cable gsr tranny

in a 91 ef hatch

less than 1500 to build (since i have most of this stuff) and i think it will make nice power and be funHope you plan on running on race gas, because ctrs in a gsr is going to yield close to like 13s compression wise.And I dont think 93 will hold that with out risk of detonation

[Vteckidd]

gsr block
gsr rods w/arp bolt
.20 ctr pistons
ported b16 head
00 itr cams
itr intake manny
itr throttle body
itr header
itr flywheel
92-93 cable gsr tranny

in a 91 ef hatch

less than 1500 to build (since i have most of this stuff) and i think it will make nice power and be fun
itll blow up with CTR pistons in it, id ditch them an get PR3s

[Samhonda95]

itll blow up with CTR pistons in it, id ditch them an get PR3s

i'm not useing a gsr head so it wont be that high.

i've built 2 ls/vtec motors with ctr's and they are fine! 1 made 189whp with a stock b16 head.

NOW back to the subject.....what cams are these?

[southside]

itll blow up with CTR pistons in it, id ditch them an get PR3sor p30

[Samhonda95]

ok.....i wont use ctr's:rolleyes:

so can anyone tell me about these cams:cry:

[southside]

Only real way is to compare lobes if you dont know

[DC2NR]

Only real way is to compare lobes if you dont know

x2 ... micrometer is the only way to be 100% sure.

[smote]

jun 4's

[Samhonda95]

jun 4's


yeah i forgot i bought some......:crazy: