Some old new stuff!

[sakasaku]

i bought this from dare and Jdmjay
Dc sport ceramic headers 4 to 1
http://i268.photobucket.com/albums/jj20/sakasaku/Picture178.jpg
http://i268.photobucket.com/albums/jj20/sakasaku/Picture167.jpg
http://i268.photobucket.com/albums/jj20/sakasaku/Picture173.jpg
http://i268.photobucket.com/albums/jj20/sakasaku/Picture191.jpg
Darrayl and jermaine heres the leak(im not mad just showing u)
http://i268.photobucket.com/albums/jj20/sakasaku/Picture168.jpg

http://i268.photobucket.com/albums/jj20/sakasaku/Picture177.jpg
Gaskets
http://i268.photobucket.com/albums/jj20/sakasaku/Picture205.jpg
http://i268.photobucket.com/albums/jj20/sakasaku/Picture206.jpg

[southside]

Clean them out before you install them.

[sakasaku]

aIR HOSE? i just got done wire brushing them so the heat wrap will adhese properly there mostly smooth

[southside]

I usually spray engine cleaner and spray them out with water. Then blow water out.

[JDMJAYDC2]

^ great idea

[sakasaku]

wat about carb or brake cleaner?

[JDMJAYDC2]

id use gunk! engine degreaser let it sit for a bit and spray that **** out def remove those o2 sensors they were on there when i first got that header and i have no idea how good they are take them off and have someone weld up the unused hole or another option is leave it in and just dont hook up the one your not going to run

[southside]

So why does it have two on there again?

[JDMJAYDC2]

obd0 uses 2 o2 sensors im going the not so cheap way on my new motor and using rywire harnesses not bigdare approved ebay ones

[southside]

HAHA mine has one and I have a check light but its because tps not o2.But im converting to obd1 soon anyways.

[cwhiteboy]

obd0 uses only 1 o2 sensor. But anyways, fix that leak, or its gonna **** up your rap. Just call some exhause places, someone will weld it up for you quickfast and cheap. Thats what I did with mine.

[bigdare23]

obd0 b16 uses 2 o2 sensors

[jfrolang]

out of focus close-ups are entirely too common on the internet. They hurt my eyes. :x