PDA

View Full Version : MK3 project


xBig_Benx
03-08-2008, 04:57 PM
ok. im about to buy a MK3 with a seized engine.

should i..
A) put a 1jz twin turbo in it.
b) put the 7MGTE turbo engine in it.

???

let me know
xBig_Benx
03-08-2008, 08:45 PM
also... i was maybe gonna try and un seize the engine. and maybe fix it but also put a new motor in the mk3.

if anyone knows how or any advice please please please Let me know

-Ben
green91
03-08-2008, 09:26 PM
1jz is not a straightforward swap, so honestly if you are even asking its probably not a good job for you. the 7mgte is at least a bolt in swap with some wiring if i remember correctly and may be a better option for you.
peelsIS
03-09-2008, 11:18 AM
as a fellow 2jz member :D. i would vote for the twin turbo 1jz. but like green91 said, it might be easier to do the 1mgte swap.
xBig_Benx
03-09-2008, 02:04 PM
thats what ive decided. i was looking for a nissan but this just fell into my lap and i took the opportunity so thats why i was asking for some advice. and i have the resources to do the swap no problem. =)
Dr Tweak
03-09-2008, 10:54 PM
1JZ for sure. It's not that hard at all and the 1JZ is SUCH a nicer engine than the 7M.

-Doc
BlkCD5
03-10-2008, 07:42 PM
just makes sure you don't go over 14psi on the 1jz stock twin setup.
CelicaGT00
03-10-2008, 11:38 PM
goodluck with this
xBig_Benx
03-12-2008, 05:19 PM
thanks celicaGT00 and BlkCD5 ... yeah i plan on pushing about 10psi for driving around.

and is there somewere were i can get a wiring harness already set up for the swap? cause i know you have to extend it by like 2 feet and cut and splice and a bunch of stuff that would be a big pain. I'm trying to get this done ASAP.
BlkCD5
03-12-2008, 11:34 PM
as far as i know, the wiring issue is going to be your biggest obstacle. Get someone who has already done the swap to help. You don't want to rush the wiring harness cus it'll **** you in the long run.
Dr Tweak
03-14-2008, 10:06 AM
I can do the wiring for you: http://www.phoenixtuning.com/
xBig_Benx
03-16-2008, 03:08 PM
how much is it?
Dr Tweak
03-17-2008, 06:56 PM
1JZ into an MK3 is usually $450.

-Doc
xBig_Benx
03-19-2008, 05:38 PM
what all do you do for 450$
xBig_Benx
03-19-2008, 05:40 PM
Also anyone who is interested in some 7MGTE parts i have plenty. i got the ECU, exaust manifold, intake manifold, etc. let me know if any of you guys want anything.

-Ben