PDA

View Full Version : Engines, Turbo, and full swap



Jaimecbr900
02-13-2008, 03:12 PM
Again, cleaning out the shop and I figured these would interest some of you.

http://i14.photobucket.com/albums/a310/jaimecbr900/DSC00906.jpg

This is a freshly rebuilt turbo. It was taken off Sam's S2000 when he put a bigger one in. He noticed a slight shaft play, so it was sent in to be totally rebuilt. Just got it back and it's not even out of the wrap. It's an Innovative T3 with a 4 in. intake/2.5 in. out, 60-1, .70 cold side, .82 hot side, HPC coated hot side, Red powder coated compressor side. I'll repeat....it's basically brand spanking new since it's got a total rebuild with ZERO miles. Still in the wrapper it came back from the rebuild in. $850.

http://i14.photobucket.com/albums/a310/jaimecbr900/DSC00915.jpg

This is an SR20 DET with a bad piston. It is totally rebuildable. Still sitting on the same crate it came to us in. Project never happened, so it's just taking up space now. $250 ******SOLD******

http://i14.photobucket.com/albums/a310/jaimecbr900/DSC00916.jpg

This is a 2.5 Subaru WRX turbo motor. It came out of an STI swap, but it has a blown head gasket. This is basically a parts motor. Don't know the shape of the motor internally, but it does include the stock turbo/sensors/intake/TB/etc. It may be good for someone that is doing a big rebuild and can use this to shorten their down time by tearing this one apart and building it. $200.

http://i14.photobucket.com/albums/a310/jaimecbr900/DSC00917.jpg

This is an H23a1 non-Vtec Honda motor. Running and in good shape when it was pulled out of a CL. $600.

http://i14.photobucket.com/albums/a310/jaimecbr900/DSC00918.jpg

This is the real deal Audi A4 full powertrain. It's the 1.8T. Everything is there and was working perfectly fine before we did a swap out of a 97. Motor, turbo, entire front clip, full rear section as well, brakes, power steering, shocks, calipers, EVERYTHING....seriously. We even have the bumpers for the car somewhere I think. If you need anything out of this car's powertrain, ask because we may have it. I didn't want to list every little bity part, so ask. We're told it's a bolt up type swap for a Passat. $1000.****SALE PENDING*****

Benefit
02-13-2008, 04:20 PM
i want that sr longblock, more info?

1SOL2NV
02-13-2008, 04:49 PM
that aint a vtec motor ..... looks like a h23 or b21 . the vtec motors that came out of CL's are SOHC .unless a H22 was swapped .. i count 2 cams .... pic of the block code to confirm ??? either way 600 is a good price on any honda motor .

Jaimecbr900
02-13-2008, 05:04 PM
that aint a vtec motor ..... looks like a h23 or b21 . the vtec motors that came out of CL's are SOHC .unless a H22 was swapped .. i count 2 cams .... pic of the block code to confirm ??? either way 600 is a good price on any honda motor .

You're right. I screwed up and got my notes backwards. He does have an F23 Vtec motor too, but I haven't got pics of that yet. Freudian slip thing.

It's been corrected. :goodjob:

Good looking out. :goodjob:

Jaimecbr900
02-13-2008, 05:04 PM
i want that sr longblock, more info?

What info do you need?

Truegiant
02-13-2008, 09:00 PM
consider the wrx swap sold. Where are you located and/or how much to ship. PM me for details.. thanks

Jaimecbr900
02-13-2008, 10:53 PM
consider the wrx swap sold. Where are you located and/or how much to ship. PM me for details.. thanks

The motor and acc are located near Atlanta. PM me your shipping info and I'll calculate the shipping for you. :goodjob:

Revmaynard
02-13-2008, 10:58 PM
Some good deals in here.:goodjob:

Batlground
02-13-2008, 11:03 PM
secdond dibs on SR too

Jaimecbr900
02-13-2008, 11:12 PM
First person with the money gets the part.....;)

19'sPrelude
02-14-2008, 12:31 AM
So what is the final word on the Honda motor? H22? H23? F23?

Jaimecbr900
02-14-2008, 09:24 AM
So what is the final word on the Honda motor? H22? H23? F23?

I fixed the original post. :thinking:

Truegiant
02-14-2008, 10:25 AM
126 teal lake drive
richmond hill, ga 31324

I am coming through atl this weekend but i am not going to be able to deviate from my route very far. Is there anyway we can meet somewhere around 75/400 area? I am coming from savannah to dahlonega..

SRCRX
02-14-2008, 01:50 PM
bUMP!!

Jaimecbr900
02-14-2008, 01:51 PM
126 teal lake drive
richmond hill, ga 31324

I am coming through atl this weekend but i am not going to be able to deviate from my route very far. Is there anyway we can meet somewhere around 75/400 area? I am coming from savannah to dahlonega..

It may be worth your time to deviate because shipping a whole motor is not going to be cheap. I will check and give you a solid number tomm.

There is no way to be able to meet up though. Sorry.

19'sPrelude
02-14-2008, 02:45 PM
I fixed the original post. :thinking:

Ok now I'm a little confused because I thought all the motors in the 1997 Acura CL's were the F22 and the F23 (besides the 6cyl's) ?

Jaimecbr900
02-14-2008, 03:28 PM
Ok now I'm a little confused because I thought all the motors in the 1997 Acura CL's were the F22 and the F23 (besides the 6cyl's) ?

I'm actually more confused than you are......:thinking: Did you look above????:thinking:

JITB
02-14-2008, 08:22 PM
dam nice steals!!

Jaimecbr900
02-15-2008, 11:06 AM
dam nice steals!!

Well come and get what's left.....:D

.blank cd
02-16-2008, 11:52 PM
I am also confused, as that "F23" has 2 cam gears. Must be an H23. CLs were SOHC besides the V6s

1SOL2NV
02-17-2008, 02:39 AM
i bet 100 that its a H23a4 ..... or jus a h23 lol im guessing on the a4 part ... if its a h23 its worth 600

.blank cd
02-17-2008, 01:23 PM
If it is an H23, im partially interested

Z33_kid
02-17-2008, 08:02 PM
good deals

Jaimecbr900
02-19-2008, 10:20 AM
If it is an H23, im partially interested

Original post fixed. :goodjob:

It's definetly an H23a1. :goodjob: