ProjectWidow
12-31-2007, 08:25 PM
ALL ARE STILL NEW IN BOX
KX2500.1 - $ 750
http://i17.photobucket.com/albums/b81/projectwidow/Kicker/kx25003.jpg
http://i17.photobucket.com/albums/b81/projectwidow/Kicker/kx2500_1-2.jpg
Class D Mono Amplifier
RMS Power Rating:
1500 watts x 1 chan. @ 4 ohms
2500 watts x 1 chan. @ 2 ohms
Dimensions (with end shrouds): 30-9/16"L x 10"W x 2-1/2"H
(2) SS65.2 $ 275
http://i17.photobucket.com/albums/b81/projectwidow/Kicker/ss65_2.jpg
http://i17.photobucket.com/albums/b81/projectwidow/Kicker/ss65_2-2.jpg
200 watts peak power handling
8-100 watts RMS
6-˝" Tri-Tech™ woofer cone (woven carbon-poly, Rohacell® foam, and carbon-poly backings)
1-3/16" Tetoron® dome tweeter
Cast aluminum basket
Butyl rubber surround
2-way crossover
ZX650.4 $250
http://i17.photobucket.com/albums/b81/projectwidow/Kicker/zx650_4.jpg
http://i17.photobucket.com/albums/b81/projectwidow/Kicker/zx650_4-2.jpg
4-Channel ZX-Series Power Amplifier
Low Impedance Operation
SORT Protection Circuitry (Short circuit, Over-voltage, Reverse polarity, Thermal)
KickBass: 0-18 dB @ 40 Hz
Built-In Variable Crossover: 12 dB High or Low-Pass operation (50-200 Hz)
High & Low level inputs
Custom tooled gold plated connectors
SAMS (Stereo And Mono Simultaneously) bridged mono load and a stereo load at the same time
Cast aluminum EndKaps
RMS Power Ratings:
120 watts x 4 chan. @ 4 ohms
170 watts x 4 chan. @ 2 ohms
325 watts x 2 chan. @ 4 ohms Bridged
Peak Power Ratings:
240 watts x 4 chan. @ 4 ohms
340 watts x 4 chan. @ 2 ohms
650 watts x 2 chan. @ 4 ohms Bridged
Input gain control: Low Level (125mV - 5V), High Level (250mV - 10V)
Dimensions: 22.5" L x 10-1/8" W x 2.5" H
RS65.2 $200
http://i17.photobucket.com/albums/b81/projectwidow/Kicker/rs65_2.jpg
http://i17.photobucket.com/albums/b81/projectwidow/Kicker/rs65_2-2.jpg
200 watts peak power handling
8-100 watts RMS
1" Teteron elliptical dome tweeter
Ferro-Fluid™ cooled tweeter voice-coil
CIMP™ (Curvilinear Injection-Molded Polypropylene) Woofer Cones
Enhanced BAM™ Assembly
High-dampening strength cast aluminum basket
Rubber Surround
Coaxial tweeter mounting option
Passive Crossover Network
Spring-Loaded Nickel Plated Terminals
Water resistant mounting hardware
KX2500.1 - $ 750
http://i17.photobucket.com/albums/b81/projectwidow/Kicker/kx25003.jpg
http://i17.photobucket.com/albums/b81/projectwidow/Kicker/kx2500_1-2.jpg
Class D Mono Amplifier
RMS Power Rating:
1500 watts x 1 chan. @ 4 ohms
2500 watts x 1 chan. @ 2 ohms
Dimensions (with end shrouds): 30-9/16"L x 10"W x 2-1/2"H
(2) SS65.2 $ 275
http://i17.photobucket.com/albums/b81/projectwidow/Kicker/ss65_2.jpg
http://i17.photobucket.com/albums/b81/projectwidow/Kicker/ss65_2-2.jpg
200 watts peak power handling
8-100 watts RMS
6-˝" Tri-Tech™ woofer cone (woven carbon-poly, Rohacell® foam, and carbon-poly backings)
1-3/16" Tetoron® dome tweeter
Cast aluminum basket
Butyl rubber surround
2-way crossover
ZX650.4 $250
http://i17.photobucket.com/albums/b81/projectwidow/Kicker/zx650_4.jpg
http://i17.photobucket.com/albums/b81/projectwidow/Kicker/zx650_4-2.jpg
4-Channel ZX-Series Power Amplifier
Low Impedance Operation
SORT Protection Circuitry (Short circuit, Over-voltage, Reverse polarity, Thermal)
KickBass: 0-18 dB @ 40 Hz
Built-In Variable Crossover: 12 dB High or Low-Pass operation (50-200 Hz)
High & Low level inputs
Custom tooled gold plated connectors
SAMS (Stereo And Mono Simultaneously) bridged mono load and a stereo load at the same time
Cast aluminum EndKaps
RMS Power Ratings:
120 watts x 4 chan. @ 4 ohms
170 watts x 4 chan. @ 2 ohms
325 watts x 2 chan. @ 4 ohms Bridged
Peak Power Ratings:
240 watts x 4 chan. @ 4 ohms
340 watts x 4 chan. @ 2 ohms
650 watts x 2 chan. @ 4 ohms Bridged
Input gain control: Low Level (125mV - 5V), High Level (250mV - 10V)
Dimensions: 22.5" L x 10-1/8" W x 2.5" H
RS65.2 $200
http://i17.photobucket.com/albums/b81/projectwidow/Kicker/rs65_2.jpg
http://i17.photobucket.com/albums/b81/projectwidow/Kicker/rs65_2-2.jpg
200 watts peak power handling
8-100 watts RMS
1" Teteron elliptical dome tweeter
Ferro-Fluid™ cooled tweeter voice-coil
CIMP™ (Curvilinear Injection-Molded Polypropylene) Woofer Cones
Enhanced BAM™ Assembly
High-dampening strength cast aluminum basket
Rubber Surround
Coaxial tweeter mounting option
Passive Crossover Network
Spring-Loaded Nickel Plated Terminals
Water resistant mounting hardware