everyone

[crhatchzc]

i got my swap done finally im goin to my wheels on tomorrow and driver side cv axle so i will diffently be at the next ef meet and i will have pictures hopefully by this weekend

PS-IM LOOKING FOR A P28 ECU-

[Papa_Smurf]

pictures for sure, i've been waiting to see pics of your car for awhile man!!!!

didn't you swap a GSR into it?

[EvasiveEF9]

Badass. Lookin' forward to it!

[crhatchzc]

yeah i swap a gsr into it and hopefully i will get pictures this weekend but im gonna go ahead and tell everyone it isnt pretty on eyes on the outside but its a working progress

[wbhard3029]

bring it next week if possible

[EvasiveEF9]

I work at a paint shop :)

[crhatchzc]

bring it next week if possible

ok i will try im just lookin for a p28 right now i think i have might found one so i will make it out there

ps- where is it at i couldnt find a post on it-

[JDMJAYDC2]

drew i told you where his paint shop is when you came over to my house yesterday well atleast i thought i did what time you coming today? im stuck here waiting on the damn ups guy! anytime after 5 FTL

[EvasiveEF9]

Hey. Jermaine. You need a hood release cable for the integra. Old one's frayed.

That is all.

[JDMJAYDC2]

WTF!!!
how in the hell did it get frayed umm let me post up in the wtb damn this car!

[crhatchzc]

lol jermaine sent you a pm

[1kreationz40]

i got my swap done finally im goin to my wheels on tomorrow and driver side cv axle so i will diffently be at the next ef meet and i will have pictures hopefully by this weekend

PS-IM LOOKING FOR A P28 ECU-


if u dont mind going obd2 i got a obd2 p72, and also a spoon chiped p28 with socket....ready to load in wat so ever base maps......!

[EvasiveEF9]

LoL, dude, it's like a 20$ part...

[1kreationz40]

the p28 is already chip, get another eprom from radio shack and let someone load in a base map, get wat im saying.

[crhatchzc]

well i dont know whats up with my car now i put a obd0 ecu in and it fires right up i put in a obd1 ecu and it will not fire up

[EvasiveEF9]

...how is that possible? They have different plugs...

[1kreationz40]

u using obd0 to obd1 harness....if yes, shouldnt be a prob should start up....!

[crhatchzc]

yeah im using a obd0 to obd1 harness but i was also wondering there was a ls in the car before i bought it from this guy he pulled the motor out but left his ecu pluged up now do you have to repin for a obd0 ls ecu to work with a ls swap in a ef

[crhatchzc]

ok im driving it home tomorrow if everything goes as planed i just dont have a tag for it yet so im kinda skitish about that but anyways i will take some pictures tomorrow

[EvasiveEF9]

..so is it still wired for LS and/or OBD1...?

I'm thinking of building the new hatch to be OBD1, so if you've got parts left over, lemmee know...

[1kreationz40]

yeah im using a obd0 to obd1 harness but i was also wondering there was a ls in the car before i bought it from this guy he pulled the motor out but left his ecu pluged up now do you have to repin for a obd0 ls ecu to work with a ls swap in a ef


you dont need to repin nothing on the ecu harness....only time when u repin and add pin's in is when your doing a dpfi into mpfi....even if you had a dx ef and wanted to go obd1, u still have to pin in the injectors....so if u had a obd0 ls ecu and plugs in the ecu harness, it works, and if u use obd0 to obd1, ls ecu should work with the obd1 p75 that is...!

[crhatchzc]

ok well maybe the boomslang ecu jumper that boomslang sent me is just a bad one ill get intouch with them

[crhatchzc]

..so is it still wired for LS and/or OBD1...?

I'm thinking of building the new hatch to be OBD1, so if you've got parts left over, lemmee know...

go obd0 is so much more easier but after i get done with everything ill let you know what i got left

[1kreationz40]

pretty much the same use a harness conversion to obd1....unless you wire up ur whole entire dash and wires to od1 lol......!

[crhatchzc]

that would be a ***** i wouldnt even deal with that