View Full Version : Crx no spark help
ok so i finally got another distributor for the motor, still no spark and the tach is not picking up the rpm. i have replaced the dizzy twice and i have pretty much checked the wiring. could my ecu be wrong or another bad dizzy. the last one had a bad cylinder sensor. im getting tired of this car not running. could someone please help im getting frustrated
shortdog005
11-06-2007, 06:16 PM
have you checked your timing belt?
SE-Rious1
11-06-2007, 06:20 PM
most time if still have spark just weak connect the leads to the dist. if nothing then maybe another bad one. are you buying used or new ?
ive had that problem before and went through 4 dist. till one worked
well i specked out the dizzy according to fsm and it checks out. i think it might be ecu, running out of options lol
have you checked your timing belt?
wtf? my timing belt?.......:thinking:
Barefoot
11-07-2007, 02:55 AM
crank sensor timing belt ecu and grounds
Siverprobegt
11-07-2007, 05:56 AM
wtf? my timing belt?.......:thinking:
Take the dizzy cap off and make sure it's spinning as you crank the motor!!!If it don't spin,check your timing belt!!
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.