for all the boost heads out there?????

[helcat17]

i have a boosted 94 integra RS i want to know what is safe boost to run on a stock b18b1 i have 450cc DSM,it was tuned by "mainstreem performance thanks scotty" at 5.5 psi but im wanting to know what i could take it up too safely by maybe changing head gasket and maybe going to ARP head studs and A RETUNE just looking for some ideas thanks guys

[vancem3m3]

10 or 11 scotty did mine to and im all stock bolts and hg 270 on 560 dsm inj.

[helcat17]

and im talking about with it being retuned thanx vancem3m3

[xbn83]

Use ARP rod bolts & ARP head studs!

[helcat17]

i know theres more people out there with good thoughts!!

[Kevykev]

Sounds like you want to push your limits - where you are now is safe!


You just want someone to post 14psi don't you?


I bet your B18b1 engine has over 150k on it right?

build it before you break it!

[KPowerEP3]

Sounds like you want to push your limits - where you are now is safe!


You just want someone to post 14psi don't you?


I bet your B18b1 engine has over 150k on it right?

build it before you break it!


Good advice, but not quite as fun as romping on it one time and hearing 'ping ping ping ping BOOM'

Seriously, if it's tuned for where you're at now, don't mess with it.

[patrick4588]

psi really doesnt mean anything. a stock ls is reliable up to about 250whp. you can definitely push a lot more, but not reliably. on a 57 trim turbo, 250whp is about 10psi. just make sure to re tune if you up the boost. DO NOT UP THE BOOST AND NOT GET A RE TUNE

[helcat17]

im not looking to get bashed just to get some opinions and no my engine dose not have that many miles on it and no im not looking for someone to tell me 14 psi if its not true im simply looking for poeple that know a lil bit more about the motor than i do to let me know what they think if you feal like bashing me then its simple DONT POST!!! o and yes im wanting to push my limits a lil bit if i didnt i would have left it N/A just wanting to know what the stock motor can handle and if you had read the post it said that i was planing on geting it tuned AGIN at what ever boost i decide to run soo if your not going to answere the question i asked how about not posting at all

[Kevykev]

im not looking to get bashed just to get some opinions and no my engine dose not have that many miles on it and no im not looking for someone to tell me 14 psi if its not true im simply looking for poeple that know a lil bit more about the motor than i do to let me know what they think if you feal like bashing me then its simple DONT POST!!! o and yes im wanting to push my limits a lil bit if i didnt i would have left it N/A just wanting to know what the stock motor can handle and if you had read the post it said that i was planing on geting it tuned AGIN at what ever boost i decide to run soo if your not going to answere the question i asked how about not posting at all


Tough love is the best way to get the point across! :goodjob:

[helcat17]

thanks patrick thats the info im looking for

[Kevykev]

thanks patrick thats the info im looking for


Oh I don't get a thanks man? :no:

[KPowerEP3]

im not looking to get bashed just to get some opinions and no my engine dose not have that many miles on it and no im not looking for someone to tell me 14 psi if its not true im simply looking for poeple that know a lil bit more about the motor than i do to let me know what they think if you feal like bashing me then its simple DONT POST!!! o and yes im wanting to push my limits a lil bit if i didnt i would have left it N/A just wanting to know what the stock motor can handle and if you had read the post it said that i was planing on geting it tuned AGIN at what ever boost i decide to run soo if your not going to answere the question i asked how about not posting at all

I didn't see anyone bashing you. You were actually kind of unclear in your OP...you made it seem like you wanted to turn the boost up without a retune. You didn't ask what the MAXIMUM your LS would hold.

Either way, glad you got the info you were looking for.

[helcat17]

OP edited to say with retune sorry if i was unclear befor

[NAG2I]

id say go with the arp head studs and you would be fairly safe
the main problem i see with peoples boosted stock ls's are lifting the head due to stock head bolts.

[helcat17]

thanks nag2i but what psi have you seen the head lifting hapening at?

[EmminoDaGreat]

I wouldnt do more than 10psi as it sits. The b-series weak ringlands would probably break before the head would lift.

[helcat17]

i think im gona aim around 9-10 psi and i have a 57 trim but im going to change the head studs anyway and allsoo the head gasket since im going to be in there if anyone has an idea on a good gasket let me know thanks everyone

[helcat17]

im allsoo going to start looking for some internals im considering eagle rods and wesco pistons 8.5 comp. if anyone has better ideas let me in on that too

[NAG2I]

everything you would probably want to know and more is in this thread
http://www.honda-tech.com/zerothread/1323059
i will look too about the head lifting i mentioned

[Da_unknown]

y dont u just build it instead of turning da boost up... makes no sense taking da head off for some headstuds and head gasket... **** u got it apart that far u might ass well go for it...

[helcat17]

y dont u just build it instead of turning da boost up... makes no sense taking da head off for some headstuds and head gasket... **** u got it apart that far u might ass well go for it...

lol cause i dont got a grand to throw down on it at this time for internals i colect parts piece by piece then when i get it all together i take a weekend and put it all on or in lol but if your wanting to pay for it im taking offers :)

[Da_unknown]

lol...am good homie....

[patrick4588]

im allsoo going to start looking for some internals im considering eagle rods and wesco pistons 8.5 comp. if anyone has better ideas let me in on that too

i used cp pistons in my build; so thats what i would go with. also, there is no need to lower the compression. stick with stock or around 9:1. oh and go with a oem head gasket. if you bore it out, then get a golden eagle; they use stock honda ones and modify the bore.

[helcat17]

all the info is great keep it comin

[-S Double C-]

i see so many 300whp boosted ls's on h-t it's not funny i say push it somewhere around there.

[sneakysneaky]

I wouldnt change a thing except the map sensor and a 10lb
spring for your wg. B18bs are a dime a dozen. Just build a
spare block and you have no downtime. just my 2cents.

[KevinT707]

Although there are a lot of "claimed" 300 WHP B18A/B (LS), I don't remember seeing anyone locally with a 300 or even high 200 WHP Turbo-LS driving around ... reliably.

[lsxtreme]

wat size turbo..??

but thought i let ya know on my scenario.. i was on a little itty bitty turbo with a VW t25 turbo.. and i maxx'd it out @ 13lbs all stock internal, nothing aftermarket on it .. and i daily drive it :) ............... from cobb2gwineett everything day .. i only dawg on it a once/twice, no problem i'd say.. depending on ur turbo .. if it's small one dawg it mann your not going to hurt it.. unless your a bigg baller t3/t4 or higher.. leave it be..

[AnthonyF]

"boost head"? i'm a junkie. lol.


i'd say about 7-10 with a good tune

[dickdragon]

everything you would probably want to know and more is in this thread
http://www.honda-tech.com/zerothread/1323059
i will look too about the head lifting i mentioned


interesting

[-S Double C-]

Although there are a lot of "claimed" 300 WHP B18A/B (LS), I don't remember seeing anyone locally with a 300 or even high 200 WHP Turbo-LS driving around ... reliably.

@$@$@$@$ the car importmyth01 drove made high 200's and has had about 9 owners beat on it since him and still runs 12's easily. It even seen some 18psi momments. And some dude just sold a del sol that had been boosting 20psi for like two years on the stock motor.