brittoknee
06-25-2007, 12:45 PM
My loss is your gain... you guys know how much work, effort, and quality parts went into this car... so take the opportunity to put a piece of my frankenstein in your lude.
**Shell is sold so all bodyparts are too**
1992 H23Vtec JunLude:
Everything is OBO so throw me an offer... the worst that can happen is I say hell no and maybe laugh at you :D
This is whats left:
JUN III cams, springs, retainers, Volution Racing adjustable cam gears- $1500
http://i18.photobucket.com/albums/b108/brittoknee/th_h23vtec011.jpg (http://i18.photobucket.com/albums/b108/brittoknee/h23vtec011.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_adjcamgear-titanium.jpg (http://i18.photobucket.com/albums/b108/brittoknee/adjcamgear-titanium.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap038.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap038.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap040.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap040.jpg)
Hondata S100 w/ p28- $300 (pending)
Iceman CAI w/ filter and all connecting pieces- $100
http://i18.photobucket.com/albums/b108/brittoknee/th_h23vtec014.jpg (http://i18.photobucket.com/albums/b108/brittoknee/h23vtec014.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap026.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap026.jpg)
MSD SCI igniton w/ MSD blaster coil & MSD spark plug wires- $300
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap001.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap001.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap037.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap037.jpg)
Type S oversized pistons .25mm over- 3 were salvaged from the build w/ less than 200 miles on them- $100
As for the motor:
the h23 crank is balanced and in good shape- I'll take $200 for the crank, rods, and crank pulley
http://i18.photobucket.com/albums/b108/brittoknee/th_efc8e351.jpg (http://i18.photobucket.com/albums/b108/brittoknee/efc8e351.jpg)
The H22 head has significant damage to intake valves and one exhaust valve seat but a highly qualified machinist said it's definitely fixable. If anyone's up for it they're welcome to it- $100
Water pump (brand freakin new)- $100
Any parts you may need from the block or head are also up for bid etc...
Manual tensioner (all parts)- $50 **pending**
VTEC Valve Cover (purple)- $50 you can paint it!
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap036.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap036.jpg)
WWRS side skirt (only one)- $50
What's gone already:
Euro R intake manifold (lightly ported)- $325 w/ custom plate for fuel rail and ALL modifications done already so all you gotta do is bolt it on and GO! ****SOLD****
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap042.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap042.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap045.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap045.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap044.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap044.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_aquarium007.jpg (http://i18.photobucket.com/albums/b108/brittoknee/aquarium007.jpg)
KTeller stainless 2.5 exhaust (mandrel bent) w/ KTeller 22in resonator, dual tip muffler (no cat) EXQUISITE welding job done- $400 *****SOLD*****
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap013.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap013.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap015.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap015.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap016.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap016.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap017.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap017.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap018.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap018.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap019.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap019.jpg)
DC header with custom 2.5in collector- $250 ***SOLD***
http://i18.photobucket.com/albums/b108/brittoknee/th_eff471d5.jpg (http://i18.photobucket.com/albums/b108/brittoknee/eff471d5.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap025.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap025.jpg)
STR fuel rail & fuel pressure regulator- $150 **SOLD**
DSM 450cc injectors BLUETOPS- $75 **SOLD**
ported TB- $75 **SOLD**
Hondata IM gasket- $50 **SOLD**
Competition Clutch 6 puck clutch (less than 200 miles on it)- $200 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap095.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap095.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap020.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap020.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap027.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap027.jpg)
14lb Clutchmasters lightened flywheel (also less than 200 miles on it) w/ pressure plate- $250
(I'll do clutch and flywheel for $350) **SOLD***
http://i18.photobucket.com/albums/b108/brittoknee/th_efc8d981.jpg (http://i18.photobucket.com/albums/b108/brittoknee/efc8d981.jpg)
Neuspeed front upper strut bar- $200 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap022.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap022.jpg)
m2b4 LSD tranny- $1200 **SOLD**
(before I cleaned it and polished the front)
http://i18.photobucket.com/albums/b108/brittoknee/th_efef33e6.jpg (http://i18.photobucket.com/albums/b108/brittoknee/efef33e6.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_efef3134.jpg (http://i18.photobucket.com/albums/b108/brittoknee/efef3134.jpg)
DC Sports rear lower tie bar- $75 ***SOLD***
http://i18.photobucket.com/albums/b108/brittoknee/th_h23vtec024.jpg (http://i18.photobucket.com/albums/b108/brittoknee/h23vtec024.jpg)
AEM Power Pully alternator pulley- $40 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_aquarium003.jpg (http://i18.photobucket.com/albums/b108/brittoknee/aquarium003.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_aquarium005.jpg (http://i18.photobucket.com/albums/b108/brittoknee/aquarium005.jpg)
MOMO Race steering wheel w/ Sparco steering wheel hub- $200 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_h23vtec007.jpg (http://i18.photobucket.com/albums/b108/brittoknee/h23vtec007.jpg)
EL gas and water temp gauge- $25 **SOLD**
Wingswest RS front lip (needs some love)- $250 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_Picture029.jpg (http://i18.photobucket.com/albums/b108/brittoknee/Picture029.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_Picture031.jpg (http://i18.photobucket.com/albums/b108/brittoknee/Picture031.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_Picture025.jpg (http://i18.photobucket.com/albums/b108/brittoknee/Picture025.jpg)
JDM Black housing onepiece headlights (great condition)- $225 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap003.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap003.jpg)http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap005.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap005.jpg)
OEM Custom taillight (amber removed) RIGHT side only- $35 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap011.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap011.jpg)
Accord rear lip- $20 (the right side was cut a little too much by my exhaust shop... but if you want it its yours) **SOLD**
Radiator/fans- $150 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap023.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap023.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap024.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap024.jpg)
complete wiring harness (very clean)- $100 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap021.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap021.jpg)
2 Chrome audiobahn 10' sub grill covers- $30
http://i18.photobucket.com/albums/b108/brittoknee/th_aquarium009.jpg (http://i18.photobucket.com/albums/b108/brittoknee/aquarium009.jpg)
***The complete shell is SOLD... so all body parts are too***
This is the beginning to a long heartbreaking partout.... but it's the best of the best stuff for the 4th gen.
Ofcourse buyer pays any and all shipping...
Feel free to call me @ 678-789-9506, email me @ [email protected], or pm me here....
Thanks
**Shell is sold so all bodyparts are too**
1992 H23Vtec JunLude:
Everything is OBO so throw me an offer... the worst that can happen is I say hell no and maybe laugh at you :D
This is whats left:
JUN III cams, springs, retainers, Volution Racing adjustable cam gears- $1500
http://i18.photobucket.com/albums/b108/brittoknee/th_h23vtec011.jpg (http://i18.photobucket.com/albums/b108/brittoknee/h23vtec011.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_adjcamgear-titanium.jpg (http://i18.photobucket.com/albums/b108/brittoknee/adjcamgear-titanium.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap038.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap038.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap040.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap040.jpg)
Hondata S100 w/ p28- $300 (pending)
Iceman CAI w/ filter and all connecting pieces- $100
http://i18.photobucket.com/albums/b108/brittoknee/th_h23vtec014.jpg (http://i18.photobucket.com/albums/b108/brittoknee/h23vtec014.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap026.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap026.jpg)
MSD SCI igniton w/ MSD blaster coil & MSD spark plug wires- $300
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap001.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap001.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap037.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap037.jpg)
Type S oversized pistons .25mm over- 3 were salvaged from the build w/ less than 200 miles on them- $100
As for the motor:
the h23 crank is balanced and in good shape- I'll take $200 for the crank, rods, and crank pulley
http://i18.photobucket.com/albums/b108/brittoknee/th_efc8e351.jpg (http://i18.photobucket.com/albums/b108/brittoknee/efc8e351.jpg)
The H22 head has significant damage to intake valves and one exhaust valve seat but a highly qualified machinist said it's definitely fixable. If anyone's up for it they're welcome to it- $100
Water pump (brand freakin new)- $100
Any parts you may need from the block or head are also up for bid etc...
Manual tensioner (all parts)- $50 **pending**
VTEC Valve Cover (purple)- $50 you can paint it!
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap036.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap036.jpg)
WWRS side skirt (only one)- $50
What's gone already:
Euro R intake manifold (lightly ported)- $325 w/ custom plate for fuel rail and ALL modifications done already so all you gotta do is bolt it on and GO! ****SOLD****
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap042.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap042.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap045.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap045.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap044.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap044.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_aquarium007.jpg (http://i18.photobucket.com/albums/b108/brittoknee/aquarium007.jpg)
KTeller stainless 2.5 exhaust (mandrel bent) w/ KTeller 22in resonator, dual tip muffler (no cat) EXQUISITE welding job done- $400 *****SOLD*****
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap013.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap013.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap015.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap015.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap016.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap016.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap017.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap017.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap018.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap018.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap019.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap019.jpg)
DC header with custom 2.5in collector- $250 ***SOLD***
http://i18.photobucket.com/albums/b108/brittoknee/th_eff471d5.jpg (http://i18.photobucket.com/albums/b108/brittoknee/eff471d5.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap025.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap025.jpg)
STR fuel rail & fuel pressure regulator- $150 **SOLD**
DSM 450cc injectors BLUETOPS- $75 **SOLD**
ported TB- $75 **SOLD**
Hondata IM gasket- $50 **SOLD**
Competition Clutch 6 puck clutch (less than 200 miles on it)- $200 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap095.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap095.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap020.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap020.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap027.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap027.jpg)
14lb Clutchmasters lightened flywheel (also less than 200 miles on it) w/ pressure plate- $250
(I'll do clutch and flywheel for $350) **SOLD***
http://i18.photobucket.com/albums/b108/brittoknee/th_efc8d981.jpg (http://i18.photobucket.com/albums/b108/brittoknee/efc8d981.jpg)
Neuspeed front upper strut bar- $200 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap022.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap022.jpg)
m2b4 LSD tranny- $1200 **SOLD**
(before I cleaned it and polished the front)
http://i18.photobucket.com/albums/b108/brittoknee/th_efef33e6.jpg (http://i18.photobucket.com/albums/b108/brittoknee/efef33e6.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_efef3134.jpg (http://i18.photobucket.com/albums/b108/brittoknee/efef3134.jpg)
DC Sports rear lower tie bar- $75 ***SOLD***
http://i18.photobucket.com/albums/b108/brittoknee/th_h23vtec024.jpg (http://i18.photobucket.com/albums/b108/brittoknee/h23vtec024.jpg)
AEM Power Pully alternator pulley- $40 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_aquarium003.jpg (http://i18.photobucket.com/albums/b108/brittoknee/aquarium003.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_aquarium005.jpg (http://i18.photobucket.com/albums/b108/brittoknee/aquarium005.jpg)
MOMO Race steering wheel w/ Sparco steering wheel hub- $200 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_h23vtec007.jpg (http://i18.photobucket.com/albums/b108/brittoknee/h23vtec007.jpg)
EL gas and water temp gauge- $25 **SOLD**
Wingswest RS front lip (needs some love)- $250 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_Picture029.jpg (http://i18.photobucket.com/albums/b108/brittoknee/Picture029.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_Picture031.jpg (http://i18.photobucket.com/albums/b108/brittoknee/Picture031.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_Picture025.jpg (http://i18.photobucket.com/albums/b108/brittoknee/Picture025.jpg)
JDM Black housing onepiece headlights (great condition)- $225 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap003.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap003.jpg)http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap005.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap005.jpg)
OEM Custom taillight (amber removed) RIGHT side only- $35 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap011.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap011.jpg)
Accord rear lip- $20 (the right side was cut a little too much by my exhaust shop... but if you want it its yours) **SOLD**
Radiator/fans- $150 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap023.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap023.jpg)
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap024.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap024.jpg)
complete wiring harness (very clean)- $100 **SOLD**
http://i18.photobucket.com/albums/b108/brittoknee/th_brittmotorswap021.jpg (http://i18.photobucket.com/albums/b108/brittoknee/brittmotorswap021.jpg)
2 Chrome audiobahn 10' sub grill covers- $30
http://i18.photobucket.com/albums/b108/brittoknee/th_aquarium009.jpg (http://i18.photobucket.com/albums/b108/brittoknee/aquarium009.jpg)
***The complete shell is SOLD... so all body parts are too***
This is the beginning to a long heartbreaking partout.... but it's the best of the best stuff for the 4th gen.
Ofcourse buyer pays any and all shipping...
Feel free to call me @ 678-789-9506, email me @ [email protected], or pm me here....
Thanks