92 240sx ka24de exhaust cam 248 dur

[spooled]

EDIT:

I have a stock exhaust cam from a 1992 ka24de rwd motor. The cam is used but in good condition. Easy, inexpensive upgrade for your 95-98 s14 or Altima with this bigger duration exhaust cam. Approximately 10+hp gain depending on application. Please do the research as there are different setups to installing this cam that would give you the approriate gains for your powerband.


$30

http://www.importatlanta.com/upload/files/74/92_240sx_ex_cam.jpg

[Wurm]

hmmm could always use a exhaust cam on the intake side

[spooled]

hmmm could always use a exhaust cam on the intake side

Absolutely. Here are some specs for those interested.

91-93 240sx ka24de
intake cam 240 deg
exhaust cam 248 deg

95-98 240sx ka24de
intake cam 232 deg
exhaust cam 232 deg

[Spektrewing386]

you do not get 20hp from switching those cams.

[spooled]

you do not get 20hp from switching those cams.

That is somewhat correct. I'll edit my first post.

My dyno results gave the following on an automatic ka24de altima

232 intake 232 exhaust - 125whp, 140ft/lbs

248 intake 232 exhaust - 130whp, 147ft/lbs

Now this is on an automatic so assuming you loose more with the auto transmission the gain is somewhere in the 10-15hp range. SAFC or some kind of EFI fine tuning hardware recommended.

[Spektrewing386]

theres a good post on NICO about the cam swaps

[spooled]

theres a good post on NICO about the cam swaps

Yep, here's the link for those interested. If you have a set of JWT sprokets ($140 investment) and SAFC then the gains can be greatly improved for your application ie: Turbo vs NA

http://forums.nicoclub.com/zerothread/152578