EG Swap??

[cttdid666]

Ok I got a 1993 CX Hatch and I was planing on swapping the motor out with most likly a B20B. Now I'm not real good with swapping motor's and shyt but what would be a good tranny to go with the motor? :???:
Also would this motor be a good motor to go N/A with and what would I have to do to start that?
Thanks for the input ppl....
-Michale M.

[bigdare23]

tranny ranking
1 type r
2 gsr
3 b16
4 ls

Honestly, I dont really like the b20b. I prefer the b20z because of the higher compression. Anyways, Its still a pretty good start since it does make the most torque of the b-series motors and you can use all the b18a/b parts on it. Then your can make a b20/vtec swaping out the head with a b16 or gsr head.

[cttdid666]

sweet man thanks for the help...would can i find a B20Z...I want to get that motor but ever site I look at I can't find it...

[thepolecat]

Depends on your budget really. I'm cheap so I'd go with a LS. If you do a typeR you might as well bet a tranny off a B16 seeing as how that have pretty much the same gearing. but a type r and a b16 tranny both are good at getting you to speed, but you run a higher rpm on the highway for cruising.


But thats just me

[dowhatido]

---this is a very braud question---

if u are goin to go all motor the put a c5 with a b16 final drive in the gsr tranny, and build the fuk out of the motor with high comp. if you are goin to go turbo i would take the b20 block with a b18c1 head with head work retainter and springs w/ the ls tranny for the gears,but you can go wither way just depends on what u are tying to get out of ur motor------you have a light ass car so which ever way u go from what ur sittin with now u are go to be happy........atleast for a litl bit