PDA

View Full Version : Built D16z6 F/S



bernard
02-18-2007, 08:49 PM
Well its time to move on. So here is the list as a complete setup for sale no parting out as of right now.

D16Z6 motor and Tranny.
Vitaria Pistions
Scat Rods
King Bearing Rods and Main
New Seals
Z6 Head Gasket
Arp Rod and Head studs
Hasting Pistion Rings
New oil and water pump
New Timing Belt
Ported and Polished Head
New valve seals
All sensors on motor and Tranny will come with the swap.
Dist also with out the external coil. Absolutely no grinds in the tranny.
7 lb Fidanza Flywheel
6 puck sprung clutch power clutch
and the clutch and the pressure plate are rebuildable
Msd wires
B&M F.P.R
No injectors Unless u want the stock ones
Powder coated valve cover

And dam i think that is it. motor has about 9,000 miles on it or maybe less. No more than 9. I made 283 to the wheels on my tune. With 510 injectors. bigger injectors and a better tuner than me and its a 300 hp car. Motor is still in car with turbo kit still on. As a complete swap asking price is $1300 obo.

bernard
02-18-2007, 08:51 PM
dam sorry for the huge pics still new to this computer stuff.

Halfwit
02-18-2007, 08:58 PM
good price.

bernard
02-18-2007, 09:02 PM
i know bro and the clutch and flywheel was just put on in nov 06.

osnap
02-18-2007, 09:03 PM
good price, man. up.

112480
02-18-2007, 09:27 PM
yeah it's a good price....up.

khoip88
02-18-2007, 10:30 PM
complete swap means that it will include the turbo kit??? or just the engine n tranny?

SoLJames95
02-18-2007, 11:50 PM
What ize turbo is that?

Rage
02-19-2007, 12:04 AM
Hey man, check your PM. We need to talk. Call me tomorrow. Im off.

L8R

puregroove
02-19-2007, 05:00 AM
good price, man. up.

+1 :goodjob:

bernard
02-19-2007, 07:15 AM
Only the engine and Tranny.

bernard
02-19-2007, 07:16 AM
What ize turbo is that?

A t3/t4 with a 57 trim. Turbonetics

bernard
02-19-2007, 07:17 AM
Hey man, check your PM. We need to talk. Call me tomorrow. Im off.

L8R ok will do.

inutero93
02-19-2007, 07:50 AM
hey man hit me up i got that head you wanted to look at .. well rage has it at his place ... nice car i see it every morning on my way to the bank

bernard
02-19-2007, 09:39 AM
hey man hit me up i got that head you wanted to look at .. well rage has it at his place ... nice car i see it every morning on my way to the bank

Thanks bro!! Ill hit u up asap. And i gotta get your # from Tom.

SoLJames95
02-19-2007, 12:11 PM
Where you located?

BABY J
02-19-2007, 04:04 PM
Bump for resized pics.

bernard
02-19-2007, 07:54 PM
Where you located?

Im in Valdosta Ga. I will drive to almost anywhere also, if its reasonable. And also the Manifold is for sale too its a Peak Performance mani and it houses and 38 mm wastegate flange. Thanks guys for the bump

bernard
02-19-2007, 07:57 PM
Bump for resized pics.

Dam thanks for the resize homie.

bernard
02-20-2007, 11:48 AM
:D afternoon bump all pm answered

bernard
02-20-2007, 05:21 PM
pm replied

bernard
02-20-2007, 07:58 PM
evening bump.

abatown
02-20-2007, 09:53 PM
Hey, How Much Do You Want for Everything. Engine Tranny and Turbo kit.. Everything Included.. I'm sorry for my ignorance but, WIll this fit my 96'Civic Hatchback? Thanx Let me know...

bernard
02-20-2007, 10:18 PM
Hey, How Much Do You Want for Everything. Engine Tranny and Turbo kit.. Everything Included.. I'm sorry for my ignorance but, WIll this fit my 96'Civic Hatchback? Thanx Let me know...

Hey bro not selling the turbo kit man. Just the motor setup and the Turbo mani. But this motor will fit in your ek. U need to swap the mounts and wiring harness. But if u really want the kit pm me. This is no cheap kit. Apexi twin fmic huge ass Shi*. Turbonectics t3/t4 turbo polished housing $$ manifold and tial wastegate with dual springs inside hks bov goodridge oil lines, etc etc etc. Just let me know.

bernard
02-21-2007, 06:39 AM
:goodjob: Morning

bernard
02-21-2007, 11:50 AM
afternoon everyone

bernard
02-21-2007, 05:21 PM
:cheers: brost!! German

bernard
02-21-2007, 06:59 PM
pending sale

blue_5g_zc
02-21-2007, 09:42 PM
if this thing isn't gone by this weekend, let me know, i got cash in hand and am looking for a built d16.

bernard
02-22-2007, 07:18 AM
pm answered.

blue_5g_zc
02-22-2007, 01:36 PM
thanks, who did the rebuild?? and any receipts for parts?

bernard
02-22-2007, 07:30 PM
Ha, i did the rebuild and i worked for Honda ecker autohaus in germany. But if u need the receipts i can get them, mostly all parts were bought from him and race eng..

blue_5g_zc
02-23-2007, 09:34 PM
bump, did it sell yet? if not then i got dibs.

bernard
02-23-2007, 10:04 PM
still waiting man, ill let u know by sat evening

bernard
02-25-2007, 09:13 AM
bump for sunday

inutero93
02-25-2007, 10:48 AM
i will still beat you in reverse hahahahahahahahahahahahahah

typerc6
02-26-2007, 05:30 PM
bump

blue_5g_zc
03-01-2007, 08:03 PM
sold bitches :)

Mr.MuayThai
03-01-2007, 08:43 PM
pm'd