Results 1 to 39 of 39

Thread: Built D16z6 F/S

  1. #1
    Certified Gearhead bernard's Avatar
    Join Date
    Jan 2007
    Location
    J-ville FL. FR. O'side Ca.
    Age
    49
    Posts
    600
    Rep Power
    20

    Default Built D16z6 F/S

    Well its time to move on. So here is the list as a complete setup for sale no parting out as of right now.

    D16Z6 motor and Tranny.
    Vitaria Pistions
    Scat Rods
    King Bearing Rods and Main
    New Seals
    Z6 Head Gasket
    Arp Rod and Head studs
    Hasting Pistion Rings
    New oil and water pump
    New Timing Belt
    Ported and Polished Head
    New valve seals
    All sensors on motor and Tranny will come with the swap.
    Dist also with out the external coil. Absolutely no grinds in the tranny.
    7 lb Fidanza Flywheel
    6 puck sprung clutch power clutch
    and the clutch and the pressure plate are rebuildable
    Msd wires
    B&M F.P.R
    No injectors Unless u want the stock ones
    Powder coated valve cover

    And dam i think that is it. motor has about 9,000 miles on it or maybe less. No more than 9. I made 283 to the wheels on my tune. With 510 injectors. bigger injectors and a better tuner than me and its a 300 hp car. Motor is still in car with turbo kit still on. As a complete swap asking price is $1300 obo.
    Attached Thumbnails Attached Thumbnails -wedding-cars-siah-035-jpg   -wedding-cars-siah-037-jpg   -wedding-cars-siah-038-jpg   -wedding-cars-siah-041-jpg  

  2. #2
    Certified Gearhead bernard's Avatar
    Join Date
    Jan 2007
    Location
    J-ville FL. FR. O'side Ca.
    Age
    49
    Posts
    600
    Rep Power
    20

    Default

    dam sorry for the huge pics still new to this computer stuff.

  3. #3
    Senior Member | IA Veteran Halfwit's Avatar
    Join Date
    Sep 2005
    Location
    stockbridge
    Age
    37
    Posts
    18,643
    Rep Power
    44

    Default

    good price.
    And miles to go before I sleep,
    And miles to go before I sleep.

  4. #4
    Certified Gearhead bernard's Avatar
    Join Date
    Jan 2007
    Location
    J-ville FL. FR. O'side Ca.
    Age
    49
    Posts
    600
    Rep Power
    20

    Default

    i know bro and the clutch and flywheel was just put on in nov 06.

  5. #5
    hellaflush=hellafad osnap's Avatar
    Join Date
    Apr 2006
    Location
    NW ATL
    Age
    37
    Posts
    7,627
    Rep Power
    33

    Default

    good price, man. up.

  6. #6
    MEGATRON 112480's Avatar
    Join Date
    Jan 2006
    Location
    Mobile,AL
    Age
    46
    Posts
    1,834
    Rep Power
    22

    Default

    yeah it's a good price....up.
    EBTEC
    EMMINO BUILT
    Allmotor K EK Hatch Coming Soon.....


  7. #7
    Senior Member
    Join Date
    Aug 2005
    Location
    Lawrenceville
    Age
    38
    Posts
    1,099
    Rep Power
    22

    Default

    complete swap means that it will include the turbo kit??? or just the engine n tranny?
    96 black prelude si SOLD
    97 silver prelude sh traded
    98 honda hatch B18c1 done
    02 s2000 dd

  8. #8
    An Evo???? SoLJames95's Avatar
    Join Date
    Oct 2006
    Location
    Texas
    Age
    39
    Posts
    2,761
    Rep Power
    23

    Default

    What ize turbo is that?



  9. #9
    Certified Gearhead Rage's Avatar
    Join Date
    Jun 2005
    Age
    53
    Posts
    357
    Rep Power
    21

    Default

    Hey man, check your PM. We need to talk. Call me tomorrow. Im off.

    L8R
    Last edited by Rage; 02-19-2007 at 12:28 AM.

  10. #10
    IA Official Groover puregroove's Avatar
    Join Date
    Mar 2005
    Location
    Georgia
    Age
    44
    Posts
    5,189
    Rep Power
    32

    Default

    Quote Originally Posted by osnap
    good price, man. up.
    +1

  11. #11
    Certified Gearhead bernard's Avatar
    Join Date
    Jan 2007
    Location
    J-ville FL. FR. O'side Ca.
    Age
    49
    Posts
    600
    Rep Power
    20

    Default

    Only the engine and Tranny.

  12. #12
    Certified Gearhead bernard's Avatar
    Join Date
    Jan 2007
    Location
    J-ville FL. FR. O'side Ca.
    Age
    49
    Posts
    600
    Rep Power
    20

    Default

    Quote Originally Posted by LiLJames93
    What ize turbo is that?
    A t3/t4 with a 57 trim. Turbonetics

  13. #13
    Certified Gearhead bernard's Avatar
    Join Date
    Jan 2007
    Location
    J-ville FL. FR. O'side Ca.
    Age
    49
    Posts
    600
    Rep Power
    20

    Default

    Quote Originally Posted by Rage
    Hey man, check your PM. We need to talk. Call me tomorrow. Im off.

    L8R
    ok will do.

  14. #14
    M.O.B inutero93's Avatar
    Join Date
    Dec 2005
    Location
    valdosta ga
    Age
    42
    Posts
    906
    Rep Power
    21

    Default

    hey man hit me up i got that head you wanted to look at .. well rage has it at his place ... nice car i see it every morning on my way to the bank

  15. #15
    Certified Gearhead bernard's Avatar
    Join Date
    Jan 2007
    Location
    J-ville FL. FR. O'side Ca.
    Age
    49
    Posts
    600
    Rep Power
    20

    Default

    Quote Originally Posted by inutero93
    hey man hit me up i got that head you wanted to look at .. well rage has it at his place ... nice car i see it every morning on my way to the bank
    Thanks bro!! Ill hit u up asap. And i gotta get your # from Tom.

  16. #16
    An Evo???? SoLJames95's Avatar
    Join Date
    Oct 2006
    Location
    Texas
    Age
    39
    Posts
    2,761
    Rep Power
    23

    Default

    Where you located?



  17. #17
    Virginity Cure BABY J's Avatar
    Join Date
    Nov 2005
    Location
    everywhere & nowhere
    Age
    47
    Posts
    16,170
    Rep Power
    47

    Default

    Bump for resized pics.
    Attached Thumbnails Attached Thumbnails -wedding_cars_siah_035-jpg   -wedding_cars_siah_037-jpg   -wedding_cars_siah_038-jpg   -wedding_cars_siah_041-jpg  
    "I'm not a gynecologist... but I'll take a look."


  18. #18
    Certified Gearhead bernard's Avatar
    Join Date
    Jan 2007
    Location
    J-ville FL. FR. O'side Ca.
    Age
    49
    Posts
    600
    Rep Power
    20

    Default

    Quote Originally Posted by LiLJames93
    Where you located?
    Im in Valdosta Ga. I will drive to almost anywhere also, if its reasonable. And also the Manifold is for sale too its a Peak Performance mani and it houses and 38 mm wastegate flange. Thanks guys for the bump

  19. #19
    Certified Gearhead bernard's Avatar
    Join Date
    Jan 2007
    Location
    J-ville FL. FR. O'side Ca.
    Age
    49
    Posts
    600
    Rep Power
    20

    Default

    Quote Originally Posted by BABY J
    Bump for resized pics.
    Dam thanks for the resize homie.

  20. #20
    Certified Gearhead bernard's Avatar
    Join Date
    Jan 2007
    Location
    J-ville FL. FR. O'side Ca.
    Age
    49
    Posts
    600
    Rep Power
    20

    Default

    afternoon bump all pm answered

  21. #21
    Certified Gearhead bernard's Avatar
    Join Date
    Jan 2007
    Location
    J-ville FL. FR. O'side Ca.
    Age
    49
    Posts
    600
    Rep Power
    20

    Default

    pm replied

  22. #22
    Certified Gearhead bernard's Avatar
    Join Date
    Jan 2007
    Location
    J-ville FL. FR. O'side Ca.
    Age
    49
    Posts
    600
    Rep Power
    20

    Default

    evening bump.

  23. #23
    SEXyLExy
    Join Date
    Feb 2007
    Age
    39
    Posts
    235
    Rep Power
    20

    Default

    Hey, How Much Do You Want for Everything. Engine Tranny and Turbo kit.. Everything Included.. I'm sorry for my ignorance but, WIll this fit my 96'Civic Hatchback? Thanx Let me know...

  24. #24
    Certified Gearhead bernard's Avatar
    Join Date
    Jan 2007
    Location
    J-ville FL. FR. O'side Ca.
    Age
    49
    Posts
    600
    Rep Power
    20

    Default

    Quote Originally Posted by abatown
    Hey, How Much Do You Want for Everything. Engine Tranny and Turbo kit.. Everything Included.. I'm sorry for my ignorance but, WIll this fit my 96'Civic Hatchback? Thanx Let me know...
    Hey bro not selling the turbo kit man. Just the motor setup and the Turbo mani. But this motor will fit in your ek. U need to swap the mounts and wiring harness. But if u really want the kit pm me. This is no cheap kit. Apexi twin fmic huge ass Shi*. Turbonectics t3/t4 turbo polished housing $$ manifold and tial wastegate with dual springs inside hks bov goodridge oil lines, etc etc etc. Just let me know.

  25. #25
    Certified Gearhead bernard's Avatar
    Join Date
    Jan 2007
    Location
    J-ville FL. FR. O'side Ca.
    Age
    49
    Posts
    600
    Rep Power
    20

    Default

    Morning

  26. #26
    Certified Gearhead bernard's Avatar
    Join Date
    Jan 2007
    Location
    J-ville FL. FR. O'side Ca.
    Age
    49
    Posts
    600
    Rep Power
    20

    Default

    afternoon everyone

  27. #27
    Certified Gearhead bernard's Avatar
    Join Date
    Jan 2007
    Location
    J-ville FL. FR. O'side Ca.
    Age
    49
    Posts
    600
    Rep Power
    20

    Default

    brost!! German

  28. #28
    Certified Gearhead bernard's Avatar
    Join Date
    Jan 2007
    Location
    J-ville FL. FR. O'side Ca.
    Age
    49
    Posts
    600
    Rep Power
    20

    Default

    pending sale

  29. #29
    I am Montage
    Join Date
    Nov 2005
    Location
    Augusta, GA
    Age
    40
    Posts
    498
    Rep Power
    21

    Default

    if this thing isn't gone by this weekend, let me know, i got cash in hand and am looking for a built d16.

  30. #30
    Certified Gearhead bernard's Avatar
    Join Date
    Jan 2007
    Location
    J-ville FL. FR. O'side Ca.
    Age
    49
    Posts
    600
    Rep Power
    20

    Default

    pm answered.

  31. #31
    I am Montage
    Join Date
    Nov 2005
    Location
    Augusta, GA
    Age
    40
    Posts
    498
    Rep Power
    21

    Default

    thanks, who did the rebuild?? and any receipts for parts?

  32. #32
    Certified Gearhead bernard's Avatar
    Join Date
    Jan 2007
    Location
    J-ville FL. FR. O'side Ca.
    Age
    49
    Posts
    600
    Rep Power
    20

    Default

    Ha, i did the rebuild and i worked for Honda ecker autohaus in germany. But if u need the receipts i can get them, mostly all parts were bought from him and race eng..

  33. #33
    I am Montage
    Join Date
    Nov 2005
    Location
    Augusta, GA
    Age
    40
    Posts
    498
    Rep Power
    21

    Default

    bump, did it sell yet? if not then i got dibs.

  34. #34
    Certified Gearhead bernard's Avatar
    Join Date
    Jan 2007
    Location
    J-ville FL. FR. O'side Ca.
    Age
    49
    Posts
    600
    Rep Power
    20

    Default

    still waiting man, ill let u know by sat evening

  35. #35
    Certified Gearhead bernard's Avatar
    Join Date
    Jan 2007
    Location
    J-ville FL. FR. O'side Ca.
    Age
    49
    Posts
    600
    Rep Power
    20

    Default

    bump for sunday

  36. #36
    M.O.B inutero93's Avatar
    Join Date
    Dec 2005
    Location
    valdosta ga
    Age
    42
    Posts
    906
    Rep Power
    21

    Default

    i will still beat you in reverse hahahahahahahahahahahahahah

  37. #37
    IA Member
    Join Date
    Feb 2007
    Age
    51
    Posts
    10
    Rep Power
    0

    Default

    bump

  38. #38
    I am Montage
    Join Date
    Nov 2005
    Location
    Augusta, GA
    Age
    40
    Posts
    498
    Rep Power
    21

    Default

    sold bitches

  39. #39
    Senior Member
    Join Date
    Jan 2007
    Location
    t(-.-t)
    Age
    39
    Posts
    1,111
    Rep Power
    21

    Default

    pm'd

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!