My K20a2 EG build up thread - TONS of pics!

[OTG Signs]

The outcome is not up to par with SneezinCD5 so the bay will be sanded down and repainted in a paint booth. The dust and overspray was terrible. The initial plan was to paint the entire car in the garage, but not going to happen now. The average Joe would most likely be happy with the garage job, but too much work is going into this to settle for anything less than a clost to perfect paint job.

If the garage door was lowered to the height of a 2' box fan, and you had 2-3 of them, and sealed the gaps between them, there would be a ton less trash in the paint. :/

Great color and great build. Has me wanting to start a full-stripped project.

[Fuster_Cluck]

If the garage door was lowered to the height of a 2' box fan, and you had 2-3 of them, and sealed the gaps between them, there would be a ton less trash in the paint. :/


....and the overspray would of been 10X worst. The trash is not that bad, it's the overspray that killed it. He just painted his hatch earlier in the week using the garage method. Had to open the door because the overspray was so bad that you couldn't even see the other side of the garage. After spraying for about 20 seconds the entire driveway was a big cloud of mist.

[carbongs]

props to the in house work. looking very nice.

[dkjohnson04]

i like the hatch, clean car, that swap will be sick!!

[OaTmeaL]

nice!!! i cant wait for more pics!!!

I can't wait to get a chance to see it if I ever do!

[Benefit]

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20032/IMG_5406_cr_rs23.jpg

whats the prestige

[OTG Signs]

....and the overspray would of been 10X worst. The trash is not that bad, it's the overspray that killed it. He just painted his hatch earlier in the week using the garage method. Had to open the door because the overspray was so bad that you couldn't even see the other side of the garage. After spraying for about 20 seconds the entire driveway was a big cloud of mist.

Air filters. :)

It looks good in pictures regardless.

[Sushi]

Amazing. I would love to see this car in person.

[GSRteg®]

Looking good like alwase.

[Humphrizzle]

do more work.. i be bored.

[boosted_nonv]

dude your the man

[GSRteg®]

Loving the paint bro. :yes: :goodjob: :D :bannana:

[Fuster_Cluck]

HELP > Need to rent a paintbooth for 1 day here in the ATL area (preferbly I-75 south of 285)

Thanks again for the props :bump: No work done lately. I did pick up front GSR brakes so I can now order the 36mm Circuitworx hub adapters :bannana: Tried ordering them today, but kept getting a voice mail. I will try again Monday or Tuesday. Other than that, my seats are set to arrive Monday. Also recieved my 4pt AutoPower roll bar today :goodjob:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20032/Session%20032A/IMG_5431_cr_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20032/Session%20032A/IMG_5433_cr_rs34.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20032/Session%20032A/IMG_5434_cr_rs34.jpg

Hard to believe this paint job is not good enough, huh?

GSR front brakes up top Civic to the left:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20032/Session%20032A/IMG_5486_rs32.jpg

I probably should of went with a custom cage with the amount of money and time being put into this build. But, the AutoPower bar has been proven to work and I don't plan to put the car on the roof.

The arrival:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20032/Session%20032A/IMG_5477_rs35.jpg

I thought it was nicely packed in the cardboard box:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20032/Session%20032A/IMG_5478_rs35.jpg

I was wrong :rolleyes:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20032/Session%20032A/IMG_5480_rs35.jpg

At least it's not painted. Has a few small nicks which some sanding will take care of. We'll be laying gold paint down on the bar which should go nice with the MG :cheers:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20032/Session%20032A/IMG_5479_rs35.jpg

Weld on the bar:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20032/Session%20032A/IMG_5481_rs35.jpg

Hardware which I may be looking to upgrade some of it:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20032/Session%20032A/IMG_5485_rs35.jpg

Thanks for looking and hope to have some progress for you guys in the near future :camera:

:police:

[imbosile]

god damn...

[Humphrizzle]

should be on hondaTUNING cover once you're done with it.

[BiH1320]

my favorite thread of all.
keep up the good work man

[OTG Signs]

Your thread has caused me to keep an eye out for an EG to gut and rebuild. :)

[NAG2I]

should be on hondaTUNING cover once you're done with it.

X2 :goodjob:

[WhiteAccord]

What color you planing to do the cage?

[japan4racing]

man props to you for undetaking such a huge project...def gonna be a rad car when you are done

[Whiteboy™]

i love you

[Humphrizzle]

What color you planing to do the cage?


it says in the post he's painting it gold.

[Driftk1d350z]

wow, cant wait for the finished product. good luck!

[spacelion]

X2 :goodjob:

make that x3


BTW dude, that paint job SUCKSSS!




pause




NOT.

Looking sick. I love seeing the Penske truck arrive, because you know the big package has come PUAHAHA :D

[WhiteAccord]

it says in the post he's painting it gold.\

Thanks dude.... Didnt read it too clearly...

[Humphrizzle]

np.

thought i'd help out.

[FLIPside]

:yes: "awe"some

[allmotoronly]

damn I wish I had the time and money this guy has......

[GSRteg®]

Nice liking the roll cage.

[1SOL2NV]

UPDATES PLEASE lol .... dude reps given .. thats really nice . and worth spending 1 hour to watch the progress !!!!

[sullen]

dude, what the hell do you do for a living to be able to afford doing all this? i need to win the lottery so i can do it to my s13.

[The BUCKY]

more time than money except for the swap

[OTG Signs]

dude, what the hell do you do for a living to be able to afford doing all this? i need to win the lottery so i can do it to my s13.

So far it's like $8k. Just an assload of time.

[Gilgamesh]

DAYUM man.... after 15 pages, im sad to see the end to this thread.

i would read it all over again if i didn't have to get up in 3 hours and take the 4 hour drive to the tail of the dragon and back. :)

[d16_turbo]

im pretty sure that this isnt the end of the thread

[Gilgamesh]

yea... i didn't mean it like that, i mean the end for now my bad.


oh when people clean the entire cassis like that they usually make a roticery out of 2 engine stands so its easy to sand blast/ scrub and paint

[Fuster_Cluck]

Thanks guys for the props. Unfortunately I don't have access to things like sand blasting equipment or a rotissaree to flip the car to work the undercarriage, so I do the best with what I got :cheers:

As far as my job I work at the airport :yes:

(BTW: Anyone know who drives the red (on red GT3's) or white EK or the white EG that is parked in the Delta lot??)

So, I've been busy working and spending time with the family, so no work don lately. I did receive some more parts.....

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Roll%20bar%20and%20Seats/IMG_5538_cr_rs32.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Roll%20bar%20and%20Seats/IMG_5533_cr_rs35.jpg

Thanks for looking :police:

[The BUCKY]

damn i love the seats bro. pm me where you got them and price if you dont mind

[cactusEG]

damn i cant wait to see more

[greasemunkey]

where i work(impreglon) me and another guy do the sandblasting, not sure if you can get a good deal or not, but its right off of 85 if you want more info just pm me

[WhiteAccord]

Sweet Shit... Nice seats...

[joesblk_teg]

every time i check this thread i get more excited to see it finished

[ueyedgr8tness]

WOw some 1 has way to much time on hand DAmn this is hot going thoe bro!!

[Z32redondo]

Fuck just spent like an hour and a half reading up on this. VERY nice stuff. I have the time, I have the money...I dont have the garage (insert frowny face). Inspires me to take the front and rear end off the Z when I get some rims and tires (if I keep it) and clean them/powdercoat some of them.

[GSRteg®]

Alwase nice

[jaystar]

nice when u think u going 2 finish

[FLIPside]

those seat seats are damn nice, i have got to see this car in person. The detail is inspiring, keep it up :bannana:

[allmotoronly]

damn!!!!!!! I was hoping for an update!!!!!!!!!

[Fuster_Cluck]

damn i love the seats bro. pm me where you got them and price if you dont mind

I don't mind posting here. Picked them up for $300 each with free shipping with the purchase of the rollbar.


where i work(impreglon) me and another guy do the sandblasting, not sure if you can get a good deal or not, but its right off of 85 if you want more info just pm me

Well, the undercarriage is already sprayed. Thanks for the offer anyhow :cheers:

Thanks guys for the props. I'm hoping to have her up and running before the Nopi Nationals. :yes: Don't expect much for updates in the near future. I've got to get the suspension finished up so I can put the rollers on and get her out to paint. Looks like she'll be going down to Cental FL for body work and paint. Oh well, got to be done. Then it will be time to install the motor and everything else......

My 36mm 4 X 100 Circuitworx hubs arrived:
OEM axles FTW :yes: :cheers:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Circuitworx%20Hubs/IMG_5568_cr_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Circuitworx%20Hubs/IMG_5576_cr_rs34.jpg

And my favorite from this little shoot:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Circuitworx%20Hubs/IMG_5570_cr_rs35.jpg

Fine product Circuitworx is putting out. Packed very nicely in bubble wrap and speedy shipping :goodjob: :goodjob:

:police:

[Z32redondo]

Damnit...i wanted a big 100 picture long update

[white24d]

WOW.
This is the best DIY thread I have ever read.

Mad Props

[Repost Squintz]

aww u should've done 5 lug... oh well, roll cage and sparco seats are the hotness.

[Nittanys1]

I have been watching for some time now and would love to be able to do somethign like this!

Are you going to make this a RHD civic?

[The BUCKY]

let me know if you want some custom paint work. would be glad to help out

[1SOL2NV]

MORE PICS !!!!!!!!!!!!!! starving for more @

[Da_unknown]

WOW.
This is the best DIY thread I have ever read.

Mad Props
x2

[takume]

Wow....
crazy thread. Keep going, waiting for more pics.

[sleepys4]

Thanks guys for the props. Unfortunately I don't have access to things like sand blasting equipment or a rotissaree to flip the car to work the undercarriage, so I do the best with what I got :cheers:

As far as my job I work at the airport :yes:

(BTW: Anyone know who drives the red (on red GT3's) or white EK or the white EG that is parked in the Delta lot??)

So, I've been busy working and spending time with the family, so no work don lately. I did receive some more parts.....

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Roll%20bar%20and%20Seats/IMG_5538_cr_rs32.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Roll%20bar%20and%20Seats/IMG_5533_cr_rs35.jpg

Thanks for looking :police:

Yea i know the white ek with carbon fiber wing. My next door neighbor. Do you always see both of them at night.

[sleepys4]

Do you work for Delta?

[Fuster_Cluck]

Damnit...i wanted a big 100 picture long update

Haha....

That won't happen until the car gets back from paint and we get into the motor work :goodjob:


Yea i know the white ek with carbon fiber wing. My next door neighbor. Do you always see both of them at night.

Yes. Usually parked right next to each other. The red one is on red GT3's. Both are very nice looking. There is also a white EG in the lot now w/ black or c/f hood and exhaust on dark wheels :cheers:


Do you work for Delta?

No I don't.

So, the front and rear brakes are going in for some work this week. Extended studs for the rear and new RTA bushings. The front will be getting the new hubs installed w/ new bearings. Then I will be putting the suspension back on so I can tow her down to central Florida for body work and paint. Got to drill the holes for the rollbar and seat harnesses as well. Hope to have her back here by the middle of August. That gives me a month to get the car back together :cheers:

Going to be ordering some more parts this week. I'll post pics as they arrive.

Thanks again to all for the props. I promise to go all out with detail once the K swap work starts :camera:

:police:

[Whiteboy™]

me want update :'(

[C-loS109]

damn. i just read thiiiisss whoooole thread!!!. worth every minute of it. the work is so detailed and amzing. one thing that sucks major ballz is that we gunna have to wait till middle of august!!!. +1000000000 for everythings you have done so far.

[Z32redondo]

Ahhh So good i may read it again...I will let you know when i finish.

[Slow Motion]

You have put a great amount of time and detail into this project. I am not a honda fan, but I am anxiously waiting to see the outcome of your project. I hope it turns out as well as i am thinking it will.

[The BUCKY]

what is your plan for wheels. i cant remember if you had said

[santacruz77]

you sir are the shit. you kno you will never be able to sell this after all you have put into it. and if you do it will never be worth it. +1 because your work is amazing.

[Fuster_Cluck]

Wow, you guys are awesome with the feedback. Makes me want to put even more work and effort into her :goodjob:

So, I'm past due for some updates with the project. I'm putting the front and rear end back on so she can roll out to paint in Central Florida this weekend. My bro and his buddy are saying 3 weeks and she'll be back in my hands. That will give me approximately 3 weeks to drop the motor, wire her up, install interior, and have her tuned...... Going to be on a tight schedule but I plan to have her parked in the Brown section at the Nopi Nationals :cheers: :goodjob: :welcome:

I present Session 033:

Picked up some new rear camber bolts. I still need to get some washers to shorten her up. Probably throw one washer (approx. 1/2 degree) underneath for some camber correction.

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20033/IMG_5630_rs25.jpg

Next to the OEM camber bolt:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20033/IMG_5637_rs35.jpg

In position:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20033/IMG_5632_rs35.jpg

Picked up some lube:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20033/IMG_5638_rs33.jpg

Extended studs, new bearings, and new RTA bushings installed:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20033/IMG_5642_rs35.jpg

Can't go wrong with OEM bushings :goodjob:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20033/IMG_5643_rs33.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20033/IMG_5644_rs35.jpg

All bolts going back in are getting anti seize applied first:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20033/IMG_5646_rs35.jpg

A$$ end back in:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20033/IMG_5647_rs33.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20033/IMG_5648_rs35.jpg

Wal-Mart had the 5 quarts on sale for $20, so I bought all the 5W-20 and 5W-30's :P ;)

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20033/IMG_5651_rs35.jpg

Session 034 tomorrow :camera:

Thanks for looking :police:

[The BUCKY]

wow. i wish you could have had a bigger budget bro. a big brake kit would have looked sic on there. what wheels are you putting on??

[ranj]

awesome man keep up the great work! lol

i can't wait to see that motor put in man, its gonna be soo freaking awesome!!!

[SRCRX]

Sweet!

[WhiteAccord]

CANT wait till tomorow...

[vubuilt]

i might have to go to nopi just to see this car.

[The BUCKY]

i hope you will have something to show everyone there what went into this car

[Papa_Smurf]

i'll be looking for this @ Nopi.

And if it's not there,then this whole build was pointless

^motivation :D

[boosted_nonv]

keep it up man

[Fuster_Cluck]

wow. i wish you could have had a bigger budget bro. a big brake kit would have looked sic on there. what wheels are you putting on??

Yeah, not quite ballin' enough to get a big brake kit. The teg's will have to do for now. Not sure, but most likely Rota's :cheers:


i'll be looking for this @ Nopi.

And if it's not there,then this whole build was pointless

^motivation :D

Yeah, that is motivation right there :cheers:

She'll be there, you can bet that :goodjob:

Will and Rex stopped by. Damn he is getting big. Still got those crazy eyes:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20034/IMG_5652_rs35.jpg

Got the front end in:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20034/IMG_5661_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20034/IMG_5662_rs35.jpg

Session 035:

Front brakes in. Jack still there doing the dirty work:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20035/IMG_5663_rs32.jpg

Steering wheel back in so she can find her way to the paint booth :bump:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20035/IMG_5664_rs35.jpg

I put the shifterbox together with the Karcepts kit. I wanted to make sure the opening was wide and sand if necessary before she gets painted:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20035/IMG_5665_rs35.jpg

OEM bushings need to be removed:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20035/IMG_5666_rs35.jpg

Pop the center metal tube out first:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20035/IMG_5667_rs35.jpg

Pry the rubber grommet from the shifterbox:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20035/IMG_5668_rs35.jpg

JDM shifterbox biatch :boobies:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20035/IMG_5671_rs35.jpg

Jack doing the deed:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20035/IMG_5672_rs35.jpg

Need to trim some more:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20035/IMG_5673_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20035/IMG_5674_rs35.jpg

Will stopped by so I let him get in on the build:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20035/IMG_5677_rs35.jpg

Session 036 & 037 (both on the hard drive - about 30 pictures) within the next couple days. Thanks for looking :police:

[sleepys4]

Everything is looking good! Can't wait to see it in person.

[WhiteAccord]

Aight looks good... Loving the tedious work...

[aaronfelipe]

SICK

[GSRteg®]

Damn looking good.

[redrumracer]

looks good

[WHT_EP3]

this car is going to be a dream and the defennition of pride and joy

[Rsxguy]

dam looks nice man

[one11racing]

this made me go out and a honda to build again... but I got a EJ...

[Double_0_Rusty]

That is so F'ING SWEET

[Revmaynard]

Did you get that jack at HF???

[KREEP]

All have to say is wow! I can't wait to see the finished product!

[AnthonyF]

wow...what a write up. I wish i had that much time to work on my car. keep it up man! makes me want to go outside and do something to my car. lolol

[Slow Motion]

Can't wait to get my 240 so i can do the same...more pics, more pics.......

[santacruz77]

i love you.

[TwoPointOhh]

wow... simply k20... such an amazing midori green. so much time and effort thats being put into this build. things are coming together, slowly but surely, the beast will come out!!!


still waiting for updates.

[Whiteboy™]

YAY, an update :)

[Farrow2005]

Rock on,
cant wait to see the out come.

[jdogg319]

Dude you are the sh!t...this build is gangster as hell...you should definetly write a how to book haha...good luck on everything and keep us updated!!! +1

[BiH1320]

Nice nice. Coming along great man.
Keep us updated as much as you can.

[Sport1.3]

Amazing job!! cant wait to see the finished results

[Fuster_Cluck]

Session 036:

Picked up some washers to shim out the rear camber and also shorten the new bolts:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20036/IMG_5685_rs32.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20036/IMG_5686.jpg

1 for camber correction and 3 to shim the bolt head:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20036/IMG_5687_rs32.jpg

What is the proper way to press those 2 parts back together? Yeah, new tie rod ends / castle nuts / cotter pins are going on. The knuckle ball joints are fine and will be getting new castle nuts / cotter pins:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20036/IMG_5693_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20036/IMG_5694_rs35.jpg

Some OEM parts I scooped the other day:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20036/IMG_5678_rs32.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20036/IMG_5679_rs32.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20036/IMG_5681_rs32.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20036/IMG_5682_rs32.jpg

OEM open end nuts:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20036/IMG_5683_rs32.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20036/IMG_5688_rs32.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20036/IMG_5689_rs32.jpg

$50 bull$hit kit I picked up from Home Depot returning tomorrow. Doesn't even have size M10 :2up: :gay: :umno:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20036/IMG_5702_rs32.jpg

For drilling the roll bar:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20036/IMG_5703_rs32.jpg

Put the HASport mount in place. Threaded the bolts underneath to make it easier centering the mount:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20036/IMG_5697_rs25.jpg

Got verification from a K20a member that this looked right:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20036/IMG_5698_rs35.jpg

Marked where I needed to drill:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20036/IMG_5700_rs35.jpg

The marks:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20036/IMG_5701_rs35.jpg

After 3 step ups, 1/2" holes drilled. Double drilled hole on the right was throwing the bit off. Did my best and pretty happy with the outcome:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20036/IMG_5705_rs32.jpg

In there :goodjob: :

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20036/IMG_5704_rs32.jpg[/QUOTE]

Thanks for all the comments. More pics to come......

:police:

[osnap]

this thread continuously blows me away... +1... again.

[WhiteAccord]

Hmmm.. very nice... anything gong to be done to the motor?

[Fuster_Cluck]

Hmmm.. very nice... anything gong to be done to the motor?

In 2008 she will get a snail under the hood and a Big a$$ grill (FMIC) up front :screwy:

More pics to post......

:police:

[BiH1320]

Nice niice =]

[Revmaynard]

Mm, I can't wait until '08 then. Lol.

[cactusEG]

any more pics ??

[Whiteboy™]

more updates, lol

[con]

too many qualities necessary for this project that I lack, mainly time, patience and money :lmfao:

C.W. Matthews??? That would explain it all, wish I could get a small percentage of all the invoices I process for them to get paid......

[WhiteAccord]

In 2008 she will get a snail under the hood and a Big a$$ grill (FMIC) up front :screwy:

More pics to post......

:police:


mmmm me like.... Internals?

[Fr33way]

Honda cotter pins and all, LOL you are nuts man!

[slowEG]

Sickest build ever! Reps.

[IndianStig]

nice build. i wanna see this when its done.

[FLIPside]

The car isn't even done and it looks amazing. I'm making plans to go to nopi just to see this car. Keep up the good work! :burnout:

[boosted_nonv]

keep it up

[TwoPointOhh]

UPDATES!!! hurray!!! keep'em coming...

[Fuster_Cluck]

Thanks again for the props guys. You guys are putting me in a bind when you say, "I'm coming to Nopi just to see this car". Damn that is truely flattering and so I must get her running before 2nd week of Sept :yes:

Here's some pics from my bro. The car is down in Central Florida now and they wasted no time going to work on her:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Jasons%20pics/Session%20001/Jill537-1.jpg

That's my bro's friend Jose. Said to really know his $hit!! I was told he marked the low/high spots on the roof and the way the circle is going represents the way the spot moves. ....or some $hit like that :thinking: :crazy:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Jasons%20pics/Session%20001/Jill538.jpg

A lot of black circles on her:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Jasons%20pics/Session%20001/Jill539.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Jasons%20pics/Session%20001/Jill540.jpg

I've been told the doors are already blocked / completed. Jose is working on the rear hatch today which has the largest dent and also welding the key hole shut :yes:

I still have about 30 pics I will post either tonight or tomorrow from the day she left me :p

Thanks for the props and looking :bump:

:police:

[JDM_EJ6]

man just take picture of any thing its fucking entertaining good luck thou cant wait for more pics

[Whiteboy™]

i love updates :)

[Fuster_Cluck]

man just take picture of any thing its fucking entertaining good luck thou cant wait for more pics

LMAO. :crazy:

You want update, well here you go :bump:

I present the final session before she left the LG:

Session 037:

My bro was on his way up from Central Florida and I still had some things to take care of. First thing I jumped into stripping the rear hatch:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20037/IMG_5712_rs35.jpg

Remove the 2 screws to remove the latch mechanism:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20037/IMG_5713_rs35.jpg

The mechanism:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20037/IMG_5716_rs35.jpg

Of course I had to strip one of the screws :2up: The damn thing would not come. Ended up tearing my skin at the finger with the grip of the screwdriver :(

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20037/IMG_5728_rs35.jpg

Drill it:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20037/IMG_5729_rs35.jpg

2 screws hold the open lever in place:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20037/IMG_5719_rs35.jpg

Key hole lock (being deleted):

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20037/IMG_5720_rs35.jpg

Remove the 10mm and out she comes:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20037/IMG_5724_rs35.jpg

That's all there is to the key lock:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20037/IMG_5725_rs35.jpg

Decal removal:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20037/IMG_5731_rs35.jpg

Emblem removal (thinking about deleting this as well):

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20037/IMG_5732_rs35.jpg

After you have worked the razor blade all around the emblem to break it free pry with a flattip screwdriver and use your finger to pull it free:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20037/IMG_5733_rs35.jpg

Removed and dirty:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20037/IMG_5735_rs35.jpg

Then I removed the EX lip from the bumper:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20037/IMG_5736_rs35.jpg

Ready to roll out:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20037/IMG_5737_rs35.jpg

Needed to remove the door light switch:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20037/IMG_5748_35.jpg

Remove the screw:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20037/IMG_5749_rs35.jpg

and out she comes:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20037/IMG_5750_rs35.jpg

Then I needed to remove the roof water rails.

I pushed it forward from the back:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20037/IMG_5752_rs35.jpg

Twist it toward the inside of the car:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20037/IMG_5753_rs35.jpg

and they will come loose:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20037/IMG_5754_rs35.jpg

Mad downforce with the VTAK from the k20:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20037/IMG_5756_rs35.jpg

My older bro, his Turbo beast, and a soon to be NA beast:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20037/IMG_5757_rs35.jpg

Loaded up:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20037/IMG_5758_rs35.jpg

Getting lunch at the Subway before he heads out:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20037/IMG_5760_rs35.jpg

Heading out:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20037/IMG_5761_rs35.jpg

On I-75 heading to Central Florida:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20037/IMG_5764_tu_rs57.jpg

Thanks for looking :police:

[The BUCKY]

lol love the last pic. you seem so sad

[santacruz77]

amazing!

[Z32redondo]

...Take some pictures of some more stuff. Take the suspension apart and clean it again or something. I am learing so much about a car that I have never even driven in before. Nice build though.

[Jdm94Coupe]

thats over there by tanger.....

[Nittanys1]

awesome! r you going to have your friends take pics of the car as its being painted? I feel it needs to happen :D

[KPowerEP3]

hey man, just wanted to pop back in and give you some more props, check out the latest.

also, I'm not far away and more than willing to help if you need a hand in reassembly when you get her back.

[osnap]

Im cant WAIT to see another update... hell, actually i cant wait to see this car at NOPI hopefully

[Papa_Smurf]

NOPI or bust!!!!!

you better post an update when you get it back.

[Paul_s]

nice work keep it up +1

[mushroom_toy]

Great Work!

[Humphrizzle]

Also recieved my 4pt AutoPower roll bar today :goodjob:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20032/Session%20032A/IMG_5480_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20032/Session%20032A/IMG_5479_rs35.jpg


Is this roll bar the street, race or street sport bar?

I'm interested in getting one one day and would like to know more about it.

[TwoPointOhh]

just waitin... cant wait to see the results!!!

jeebus!

[OTG Signs]

Is this roll bar the street, race or street sport bar?

I'm interested in getting one one day and would like to know more about it.

http://www.google.com/search?hl=en&rls=TSHA%2CTSHA%3A2005-45%2CTSHA%3Aen&q=autopower+60581

[puregroove]

+ reps til I can't::: :goodjob:

[cactusEG]

this has to be the best build thread ever

[jdogg319]

agreed
:yes:

this has to be the best build thread ever

[Humphrizzle]

I know where to get one, I'm just unsure which one that is. Thanks for the help though.

[Fuster_Cluck]

I believe the roll bar is the race version since the diagonal bar is welded in.

Thanks for all the props. :cheers:

The plan was to paint the car tomorrow (Sat), but the new OEM hood and bumper will not be in until Wednesday. So, the paint will be laid down on the 18th (Sat). Puts me a week behind, but she'll be done before the show :goodjob:

Update!!!

Just got done with the exterior and almost done with the interior. Welded some holes that were for the rear seats and seat belts and filled in some other spots. Doors were done last week thanks to Jose taking them home. :goodjob: He's put as much effort into this car as all of us.

Jose working his magic :bannana:

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill541.jpg

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill542.jpg

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill543.jpg

My bro SneezinCD5 welding up the seatbelt holes:

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill544.jpg

Grinding the welds down smooth enough to wipe some filler on them:

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill545.jpg

Wiping the filler:

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill546.jpg

SneezinCD5 doing some sanding (He's a painter) :gay:

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill548.jpg

Whats left for me to do :bump:

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill550.jpg

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill551.jpg

Gonna finish everything up and shoot some 2K primer on the ext. and int. More updates coming later today or tomorrow......

Thanks guys for the feedback :cheers: :goodjob:

More to come.......

:police:

[aaronfelipe]

Great success!

[d16_turbo]

looks good man

[Humphrizzle]

Your brother works at Maaco in Ocala, right?

Hopefully you get a kickass Maaco paintjob.

[Fuster_Cluck]

Thanks again guys :cheers:


Your brother works at Maaco in Ocala, right?

Hopefully you get a kickass Maaco paintjob.

Yeah, he works there :goodjob: It's all about the people working not the name :yes:

[Humphrizzle]

Yeah, that's true.

Reps because I'm bored.

[jdogg319]

lookin good keep the updates coming

[Fuster_Cluck]

Finally 2K'd the car. Interior came out really smooth. No more scratches,looks brand new again. Next is to block it all down to get it ready for paint next Sat :)

Shot some SEM high build primer so we could wash everything down without getting the filler wet.

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill554.jpg

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill552.jpg

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill553.jpg

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill557.jpg

We were starting to wash the car down when this guy rolled up and wanted to check out my work. He lives down the street and wanted us to take a look at his car and see if we could reshoot it for him. (very clean for its age)

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill560.jpg

Modori Green FTMFW :lmfao: :blah: :ninja: :bannana: :

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill561.jpg

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill563.jpg

Washed up ready to shoot:

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill558.jpg

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill559.jpg

The 2K that we used.

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill564.jpg

But before we shot the primer I tacked everything down. :yes:

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill565.jpg

Windows masked along with wheel bags :yes:

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill566.jpg

Started shooting the interior. (Yes I put on a respirator) :yes:

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill569.jpg

Jose shot the exterior:

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill567.jpg

This is how she looks as of now. Very happy with how she looks so far.

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill570.jpg

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill571.jpg

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill574.jpg

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill572.jpg

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill573.jpg

Still have 2 very little dings in the driver rear 1/4 that we need to fix but other than that its all good. :bump:

Thanks for looking :police:

[WhiteAccord]

Wow... That Is Nice.

[atlantamx3]

Wow.

Looks awesome.

Althought.. you removed literally everything else from the car... why not remove the windows & windsheild? Its still going to be white under the seals.

:(

[Driftk1d350z]

awesome

[BiH1320]

yayyy for new pics!
post more when u have time!

[FLIPside]

the suspence is killing me !!!

[OTG Signs]

You are spraying this in a booth this time, right? :)

[Da_unknown]

cant wait 2 c it once its painted...

[JDMjoe]

Looks good so far man, gl with rest of the build :goodjob:

[Fuster_Cluck]

Thanks for all the props guys! Quite a few parts on order so pics as they arrive :cheers:


You are spraying this in a booth this time, right? :)

Yeah, everything will be sprayed in a professional booth by a professional :blah: Sorry guys, got to brag on my bro :bump: The engine bay will be resprayed as well :ninja:

Purchased Wednesday afternoon, it was at my door Thursday afternoon

:boobies:

Bought it --> HERE!! (http://www.honda-tech.com/zerothread?id=1743653)

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Vibrant%20muffler/IMG_5836_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Vibrant%20muffler/IMG_5837_rs33.jpg

Thanks for looking :police:

[Slow Motion]

I love seeing updates....

[WhiteAccord]

Very Nice...

[Nittanys1]

im sure we all love the updates :D

[Fuster_Cluck]

Thanks for the props once again guys. Got to give some reps out to you all :goodjob:

It's like Christmas in August over here and I'm 5 years old again with all the excitement :lmfao: :crazy: :bump:

One pic from what arrived today:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Kteller%20exhaust/IMG_5839_rs35.jpg

Thanks for looking :police:

[mushroom_toy]

^It is?

[Nittanys1]

he he

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Kteller%20exhaust/IMG_5842_rs35.jpg

[Fuster_Cluck]

Damn, clever you are :thinking:

:goodjob:

Yeah, 3" kteller exhaust :cheers:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Kteller%20exhaust/IMG_5841_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Kteller%20exhaust/IMG_5842_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Kteller%20exhaust/IMG_5843_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Kteller%20exhaust/IMG_5845_rs35.jpg

[5spdfrk]

he he

Looks like someone went photobucket account snooping. :police:

[Nittanys1]

just a little :-/

[5spdfrk]

just a little :-/
:camera:

[jdogg319]

build is getting better and better keep it up man

[FlyingStroke240]

GOOD JOB.

[imbosile]

lookin niceeee

[bRiAnMcIvIcS]

Dude that shit is SOO clean!!! Keep up the good work. You are very meticulous with everything.

[BiH1320]

awesome awesome and awesome
keep up the amazing work

[OTG Signs]

Waiting for paint pics. :D

[Fuster_Cluck]

Damn cheater going into my PB account to get the pics :crazy:

Thanks guys for the props once again. My bro picked up the bumper, hood, EP3 pulley kit, and a few other parts from Ocala Honda. So, he is shooting for Saturday to wet her up :cheers: :bump: :yes: :goodjob: :boobies:

Walbro 255 kit arrived :bump:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Walbro%20255/IMG_5848_rs35.jpg

Got it > HERE < (http://www.honda-tech.com/zerothread?id=1965766) for $88 shipped :goodjob: Fast shipping :cheers:

Thanks for looking :police:

[Nittanys1]

^^ you have had that pics for a few days atleast :D i was that while snooping around :D

[Fuster_Cluck]

^^ you have had that pics for a few days atleast :D i was that while snooping around :D

Damn :thinking: You are right :taun:

the HybridRacing K series wiring harness came in. Picked it up for $309 shipped > HERE < (https://hybrid-racing.com/hr_products01.aspx)

Shipping :goodjob: ...and I hear the best Customer Service out there which is the reason I went with the HR harness :goodjob: :cheers:

Break down of the harness:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Hybrid%20Racing%20Wire%20Harness/IMG_5853_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Hybrid%20Racing%20Wire%20Harness/IMG_5855_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Hybrid%20Racing%20Wire%20Harness/IMG_5861_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Hybrid%20Racing%20Wire%20Harness/IMG_5856_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Hybrid%20Racing%20Wire%20Harness/IMG_5857_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Hybrid%20Racing%20Wire%20Harness/IMG_5859_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Hybrid%20Racing%20Wire%20Harness/IMG_5862_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Hybrid%20Racing%20Wire%20Harness/IMG_5863_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Hybrid%20Racing%20Wire%20Harness/IMG_5865_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Hybrid%20Racing%20Wire%20Harness/IMG_5864_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Hybrid%20Racing%20Wire%20Harness/IMG_5866_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Hybrid%20Racing%20Wire%20Harness/IMG_5868_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Hybrid%20Racing%20Wire%20Harness/IMG_5869_rs35.jpg

Thanks for looking :police:

[toonz]

+1 Nice write up!

[santacruz77]

your the shit +2! i bet your hands havnt been all the way clean in a while lol

[Whiteboy™]

MORE!! MORE!! Please?

[Fuster_Cluck]

Thanks guys for the props. Going to give out some reps :goodjob:

Actually my tub is what is dirty. I cleaned it a while back which took a ton of scrubbing. It's dirty again. I will clean it when the car is done :crazy:

Session 038:

It was 100+ degrees outside so I did not last long out there :no:

I believe I have everything for the shifter cables:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20038/IMG_5871_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20038/IMG_5872_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20038/IMG_5873_rs35.jpg

Removed the header:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20038/IMG_5876_rs23.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20038/IMG_5878_rs27.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20038/IMG_5879_rs35.jpg

It was not fun getting the old K&N filter off. I ended up shoving a pry bar through the filter and twisting it off that way :doh:

Wiped it down before putting the new OEM filter on:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20038/IMG_5883_rs35.jpg

Lubed the seal with the oil I have used for years:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20038/IMG_5885_rs35.jpg

Then it was time to do some cleaning:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20038/IMG_5887_rs35.jpg

Left side clean, right coming up:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20038/IMG_5888_rs35.jpg

For some reason the right side is a lot worst than the left side:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20038/IMG_5891_rs35.jpg

Much cleaner / OEM filter FTW :cheers:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Session%20038/IMG_5892_rs35.jpg

Thanks for looking more to come......

:police:

[allmotoronly]

nice!!! keep up the good work! you must spread some reputation around before giving it to hybrid93hatch again

[B18CDELSLO]

i love my vibrant muffler!!! you will too

[Nittanys1]

sweet!!!

[mushroom_toy]

Right on...I didn't know you had the motor already lol...i must be behind....

[Nittanys1]

awww you made your account private....booo...

[Fuster_Cluck]

Thanks again guys!!



awww you made your account private....booo...

LMAO :crazy: Got to wait and see what is coming :boobies:

Here you go for now:

Electrical tape to rewrap the OEM wire harnesses:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Wire%20Tuck%20Hardware/IMG_5904_rs35.jpg

Hardware for the headlights and I believe should work for the fender bolts that are visible in the bay. I may end up upgrading to nicer / better stuff, but for now it will work:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Wire%20Tuck%20Hardware/IMG_5905_rs35.jpg

Closer look at the bolts:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Wire%20Tuck%20Hardware/IMG_5907_rs35.jpg

Lock Washers:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Wire%20Tuck%20Hardware/IMG_5908_rs35.jpg

Washers:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Wire%20Tuck%20Hardware/IMG_5909_rs35.jpg

These clips should work nicely with the wire tuck and keeping everything nice and neat:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Wire%20Tuck%20Hardware/IMG_5910_rs35.jpg

Back side:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Wire%20Tuck%20Hardware/IMG_5911_rs35.jpg

The 2 clips (showing the 3 sides of each):

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Wire%20Tuck%20Hardware/IMG_5912_rs35.jpg

Stainless Steel screw to secure the clips to the car:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Wire%20Tuck%20Hardware/IMG_5913_rs35.jpg

More parts and Session 039 to come :goodjob:

:police:

[cactusEG]

Oh chettt, a whole 20% damn there Quazzy.

[mushroom_toy]

We want more!! :)

[jdogg319]

keep it coming!!!

[Papa_Smurf]

you're not done yet? :gay:

lol keep that shit up bro. cant wait to see this thing completed.

[swolejamaica]

good fucking job man

[imbosile]

best thread on ia

[Mr.MuayThai]

:goodjob:

[Fuster_Cluck]

Thanks again guys for the props :cheers:

My bro was supposed to spray her yesterday, but did not get a chance. The car is now at the paint shop and he promises it will be painted by WED :goodjob:

Here are some pics from yesterday:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Jasons%20pics/Chevelle/Jill589.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Jasons%20pics/Chevelle/Jill590.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Jasons%20pics/Chevelle/Jill591.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Jasons%20pics/Chevelle/Jill592.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Jasons%20pics/Chevelle/Jill594.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Jasons%20pics/Chevelle/Jill595.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Jasons%20pics/Chevelle/Jill597.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Jasons%20pics/Chevelle/Jill598.jpg

Thanks for looking... more to come :police:

[Nittanys1]

nice!

[TRUTH]

:cry::cry::cry: NOOOOOOOOOOOOOOOOOOOOOOOOOO!!!!!!!!!!!!!!!!!!:cry: :cry::cry:

I read it from start to finish today... OMFG!!!!!! You are a GOD!!!!:bowdown::bowdown::bowdown::bowdown: How do you give some one reps?!?!?! I dont know how!!! some one help!!!!! Either way great job bro.. as a fellow egg driver i can appreciate the time and care you are putting into it... I thought I went all out when I gutted mine with cleaning and spraying but you pretty much raised the bar lol.. Can't wait for next update! GL!!!

[Fuster_Cluck]

:cry::cry::cry: NOOOOOOOOOOOOOOOOOOOOOOOOOO!!!!!!!!!!!!!!!!!!:cry: :cry::cry:

I read it from start to finish today... OMFG!!!!!! You are a GOD!!!!:bowdown::bowdown::bowdown::bowdown: How do you give some one reps?!?!?! I dont know how!!! some one help!!!!! Either way great job bro.. as a fellow egg driver i can appreciate the time and care you are putting into it... I thought I went all out when I gutted mine with cleaning and spraying but you pretty much raised the bar lol.. Can't wait for next update! GL!!!

Thanks for the props :goodjob: :cheers:

Click on the little scale looking thing in the top right of the post to give a rep. :goodjob:

H4 6000k HIDs that just came in:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/HIDS/IMG_5916_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/HIDS/IMG_5918_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/HIDS/IMG_5921_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/HIDS/IMG_5919_cr_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/HIDS/IMG_5920_cr_rs35.jpg

Got them > HERE < (http://www.honda-tech.com/zerothread?id=1909180) :goodjob:

[1SOL2NV]

reps for you man .*Again*. jesus one hell of a build !!!!!!!!!

[OTG Signs]

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/HIDS/IMG_5916_rs35.jpg[img]

[img]http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/HIDS/IMG_5918_rs35.jpg[img]

[img]http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/HIDS/IMG_5921_rs35.jpg[img]

[img]http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/HIDS/IMG_5919_cr_rs35.jpg[img]

[img]http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/HIDS/IMG_5920_cr_rs35.jpg

Got them > HERE < (http://www.honda-tech.com/zerothread?id=1909180) :goodjob:

The slim ballasts are pretty neat!

[TRUTH]

Thanks for the props :goodjob: :cheers:

Click on the little scale looking thing in the top right of the post to give a rep. :goodjob:

H4 6000k HIDs that just came in:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/HIDS/IMG_5916_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/HIDS/IMG_5918_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/HIDS/IMG_5921_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/HIDS/IMG_5919_cr_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/HIDS/IMG_5920_cr_rs35.jpg

Got them > HERE < (http://www.honda-tech.com/zerothread?id=1909180) :goodjob:

thanks for the help +1 for you!

[SL33P3R]

IM LOVIN THIS THREAD!!!

[Hektik]

just checking back in.. damn some nice progress. looks like the paint has slowed you down a bit..are you still on schedule for nopi cause i would love to see thie there...


good job nad good luck.. keep up the hard work.. o and you missed a spot above the exhaust manifold on the right side:taun:

[GSRteg®]

Damn just plain damn. :goodjob:

[KPowerEP3]

fanfuckingtastic updates, as always

[Fuster_Cluck]

Thanks again guys for all the props!

Jose knocking down the 2k w/ 400:

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill599.jpg

SneezinCD5 finger f*^%$g the interior for 2 1/2 hours:

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill601.jpg

The hatch when she arrived at the shop:

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill602.jpg

WTF!, it's getting a Maaco paintjob :idb: :gay: :lmfao: :blah: :bump:

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill603.jpg

I got more to post. Thanks for looking :police:

[puregroove]

You must spread some Reputation around before giving it to Hybrid93Hatch again. :goodjob: :bump:

[white_rice]

NICE!!!!!!!!1 best eg build up eva man props 4 u :goodjob:

buht wai8n for d paint pix :ninja:

buht keep up d gud work

[white_rice]

Thanks again guys for all the props!

Jose knocking down the 2k w/ 400:

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill599.jpg

SneezinCD5 finger f*^%$g the interior for 2 1/2 hours:

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill601.jpg

The hatch when she arrived at the shop:

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill602.jpg

WTF!, it's getting a Maaco paintjob :idb: :gay: :lmfao: :blah: :bump:

http://i133.photobucket.com/albums/q75/Sneezincd5/Jill603.jpg

I got more to post. Thanks for looking :police:

dam daht fuqin accord in the baq is sittin real low

[Alan®]

i wanna see this bitch painted damn it

[Bleek0323]

niceeeeeeeeeeeeeeeeeeee

[GSRteg®]

i wanna see this bitch painted damn it



x2

[KPowerEP3]

x2
x3...definately can't wait to see some color laid down on this bish

[santacruz77]

yay makes what ever project i ever will do feel gay plus 2 more for you.

[Fuster_Cluck]

Thanks for all the props once again!!

Modifying the fuel line to accept a -6 AN hose. Cheap mod for those who want to keep the OEM fuel rail

The line that needs to be removed for modification:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/039A%20Modifying%20Fuel%20Fitting/IMG_5806_rs35.jpg

First slit the rubber hose down the middle to remove like in the pic:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/039A%20Modifying%20Fuel%20Fitting/IMG_5923_rs35.jpg

Then using your new blade and being careful not to go completely through the fitting cut the plastic hose like so:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/039A%20Modifying%20Fuel%20Fitting/IMG_5925_rs35.jpg

You fitting is now seperated & ready to accept a -6 AN hose :goodjob:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/039A%20Modifying%20Fuel%20Fitting/IMG_5968_cr_rs45.jpg

The original write up is > HERE < (http://www.k20a.org/forum/showthread.php?t=21081)

More to come, thanks for looking :police:

[jdogg319]

Keep it coming!!!

[WhiteAccord]

Ehhhh....

[Slow Motion]

Whats up with the forplay damnit.......i need more than just a few pics to be satisfied.

*good job*

^^faking it............................LIRL

[WhiteAccord]

im gay

[WhiteAccord]

me sooo horny

[BiH1320]

bump for new pics!

[FLIPside]

:yay: more, more, more, awsome work and detail! still impressed, still can't wait to see how it all turns out. Keep up all the good work.

[Fuster_Cluck]

Look what arrived:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Kpro/IMG_6005_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Kpro/IMG_6004_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Kpro/IMG_6006_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Kpro/IMG_6007_rs35.jpg

Thanks for looking :police:

[Nittanys1]

nice!

[greasemunkey]

omg...go turbo!

[Repost Squintz]

very nice. can't wait to see the car painted!

[JDM_b20b]

MORE!!!!!!!!!!!!! DAMNIT MORE!!!!!!!!!!!!!

[KPowerEP3]

KPro FTW

[white_rice]

:thinking: im wonderin wer d HELL DID U GETMONEY FRM ....lol buht nice keep it goin ...

[santacruz77]

he works at the airport lol. i pay to much attention in this thread

[ORGANIZATIONXIII]

ooooh weeee

[Fuster_Cluck]

he works at the airport lol. i pay to much attention in this thread

:cheers:

SneezinCD5: I am very disappointed today. Even though I shot the interior, and the rest is ready to spray, my boss for some dickhead reason needed to leave at 1:00. So I was uable to shoot the rest. Don't worry though guys, I am going to have her done by tuesday so she can go back to her home.

I am shooting the engine bay, jams and inner parts(underhood,inside trunk and doors) monday and then I will install everything on the car and shoot the exterior tuesday.

Here are a couple pics I took while I was at work today. Everything is going very well with the paint so far. :cheers: :goodjob:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Interior%20Paint/Jill613.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Interior%20Paint/Jill614.jpg

Sealer layed down really smooth :goodjob: :cheers:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Interior%20Paint/Jill607.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Interior%20Paint/Jill608.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Interior%20Paint/Jill609.jpg

Then came the base which also went down nice :goodjob:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Interior%20Paint/Jill610.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Interior%20Paint/Jill611.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Interior%20Paint/Jill612.jpg

And finally the clear :super: :bigok: :bigdance: :yourock:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Interior%20Paint/Jill615.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Interior%20Paint/Jill616.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Interior%20Paint/Jill617.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Interior%20Paint/Jill619.jpg

Thanks for looking :police:

[Whiteboy™]

OMG SEX!

[Kyle]

Looks sick. Great build up, I have yet to see you half-ass anything, even bolts. Well done.

[integra8705]

just 2 nice... great job man

[GSRteg®]

Damn good job man loving the color. :yes:

[SNOOPy00]

is the car going to be at the Nopi/HT meet.....i hope so....looks top notch

[cactusEG]

any more pics??

[jdogg319]

looking good man cant wait to see it all done up

[imbosile]

damn this is sick

[Fuster_Cluck]

:cheers: :bump: :goodjob: Thank you guys for making this build the #1 thread in the CAR PICS forum :goodjob: :bump: :cheers:



is the car going to be at the Nopi/HT meet.....i hope so....looks top notch

The car is registered to be in the Nopi Nationals show and of course will be at the HT / Varsity meet :goodjob: :cheers:


WTB: B or D series wire harness!! read below.....

I am now realizing that I need a few harnesses off a B or D series motor wire harness. I need the following:

1) intake air sensor harness

2) ECT fan switch harness

3) Coolant sending unit harness

I DO NOT need the actual sensors since I have new ones from Honda. I just need the harness or plug with 3" of wiring at the ends to wire into my system.

I don't think I need any other wiring from the B or D series. I'll give you integra front seats and EG rear seats if you can help me out with this.

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/95%20Vx/IMG_4417_rs25.jpg

http://www.importatlanta.com/forums/attachment.php?attachmentid=42775&stc=1

Thanks for any help :goodjob:

[puregroove]

oh my hotness:::

[BiH1320]

I am going to be so mad if you dont come to Nopi.

[Nittanys1]

^^i have entered to be able to see the car in person!

[SleeperWRX]

HELL YEAH KEEP UP THE GOOD WORK MAN!

[Fuster_Cluck]

No worries guys. The car will be at the show and after show(s) :cheers: :goodjob:

I was going over the things for my father to bring when he comes up this weekend. We plan to get a lot done :goodjob:

Talking with Mainstream about the exhaust welding and tuning :goodjob:

[Driftk1d350z]

your a beast!

best build ever...most other builds never get finished or arent properly documented

[Mik2006]

holy shit. took 40 mins to read all of this. Nice job man, and keep up the good work. reps to yah

[Fuster_Cluck]

Thanks again for the props and taking the time to read my build. The comments, props, and feedback is what makes me bring back more for you guys :goodjob:

With that being said, I leave you with bedtime pics.....


(SneezinCD5's new shoes)

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/OG%20wheels/IMG_5987_cr_rs35.jpg

(SneezinCD5's new shoes)

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/OG%20wheels/IMG_5978_cr_rs34.jpg
(SneezinCD5's new shoes)

Here's an O2 sensor I picked up (great timing coming in after exciting paint and wheel pics I know): :umno: :boobies:

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Oxygen%20sensor/IMG_6029_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Oxygen%20sensor/IMG_6030_rs35.jpg

More parts here......more pics to come....

:police:

[cactusEG]

damn i love OG's...

[white_rice]

:goodjob:great job man.....i just cant stop coming back to this thread...

[Sol-Badguy]

:leghump:

[The BUCKY]

what wheels did you order

[Crazy Asian]

og made by konig I believe.

[SL33P3R]

Where can I buy some wheels like that? dammit

[Fuster_Cluck]

what wheels did you order

Can't tell ya. Have to see when they arrive and I post pics :crazy:


og made by konig I believe.

Those wheels above are made by OG and are called "Axis Oldskool" 15" X 8" +32 offset I believe.


Where can I buy some wheels like that? dammit

Got the wheels from Wheelsnext.com

Here's the final piece to my exhaust. Just arrived.....

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Vibrant%20Resonator/IMG_6041_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Vibrant%20Resonator/IMG_6047_rs27.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Vibrant%20Resonator/IMG_6046_rs35.jpg

http://i121.photobucket.com/albums/o225/Hybrid93Hatch/Hybrid93Hatch%20K20a2%20build%20/Vibrant%20Resonator/IMG_6048_rs35.jpg

Thanks for looking :police:

[The BUCKY]

good stuff.

[TRUTH]

Bump lol just cause I want this thread on the top of the forum.... LOL keep up the good work bro....