b series blocks, head, tranny, lots more!!!!!!
PRICE DROP!!!! (3/7).... NEW PARTS ADDED 1/13 i am finally cleaning out my garage. everything is OBO, but no lowballers. not really looking for trades unless it is k series stuff. im located in the covington/ conyers area. you can text me at 770-380-6897, my name is jordan.
b16a2 block. srp pistons (9.5:1 cr) bored .025, eagle rods, arp rod bolts, arp main studs, moroso oil pan, kms block guard.all it needs is bearings, and an oil pump.......sold
b16 valve cover shaved and painted white, timing belt part is cut off.....sold
B16 head, it is polished, just dirty. comes with everything in the pics. no dizzy, no intake manifold, no vtec solenoid, no cam gears.....sold
B16 tranny, shifts perfect, smooth, with no grinds at all. it is polished too, just dirty, thats why there isnt a serial # on it. doesnt come with the shift rod........sold
B16 block. it is polished, just dirty. pretty much bare, it will need to be bored, or possibly just honed. there is a scar on the #3 cylinder from where the edge of the piston melted....traded
random ecus...there is 2 ecus from 93 prelude si, one from a 97 accord f22 with a manual transmission, ..20 ea.
b series crank. good condition...sold, i think it is from a gsr.
unorthodox racing lightweight crank pulley....sold
B16 starter....50.00
B16 obd1 alternator.....50.00
b&m fuel pressure regulator....sold
B18a1 block...no good, has hole in the side, it does have 3 pistons and rods and rod caps.....sold
random B series windage trays, oil pick ups, and rear main seal covers....10.00 ea
B16 oil pan, tapped for oil return....sold
B16 oil pump, used but in good condition, has about 40,000 miles on it.....40.00
RC 750 injectors, these need a resistor box.......sold
B16 intake manifold obd2.....40.00
BNIB H23 king main and rod bearings, and thrust washers.......50.00
B series crank, good condition, im pretty sure it is from a gsr, theres no markings on it......20.00
Bseries vtec custom cams. no cam gears. i bought them from somebody on here. they are very similar to the crower stage 3, they do have a lopey idle......150.00
when i got my car tuned, my stock b16a2 with these cams it put down 150hp. they make good mid range and top end power.
[IMG]http://i612.photobucket.com/albums/tt201/jwall2323/101_1407.jpg[/IMG ]
I also have a p28 with hondata s200. it has the tune for the b16 with the cams above, it was tuned by scottie at mainstream.....220.00
unorthodox racing adjustable cam gears.....sold
4x114.3 to 4x100 wheel adapters, 1 inch thick.....40.00
b16/ b18c cast turbo manifold.....50.00
h22 cast turbo manifold.....50.00
oem honda center caps. came off my factory prelude wheels.....40.00
b16/ b18c tubular turbo manifold. 38mm wastegate flange.....sold
eg manual transmission mount with prethane inserts....40.00
knock off greddy blow off valve. new, never used.....sold
i have a lot more parts that i will add later when i get some pics
mods, if there is anything wrong with this post plz let me know bafore you delete it, it took me forever to make this thread..lol
Reply With Quote
h22?
Originally Posted by stephengsr
