JJSPEC Racing Garage Sale V2.0-Hardcore Race Parts Inside
Here is a nice selection of parts and a couple of nice cars. I need to clear out some of these items to put money towards my next project. Please feel free to pm questions. We can take credit card. Shipping can be added and will be quoted as needed. Delivery of the cars or trailer can be arranged. Will be adding more items and pics so feel free to check back soon. Thanks for looking
First the vehicles:
DC2 Chassis:$2500
This is the single cam Integra from 2009. It has been converted to manual steering, has an RS roof skin(removed about 40 lbs), among other weight saving mods (i.e. insulation, sound deadening removal, etc).
10 point cromoly roll cage with parachute handle mount bar in ceiling. Cage can be certified for an extra $150.
Set up for H/F series.
Carpet, headliner, dash, and interior plastics included.
Front coilovers with adjustable KYB struts. The same setup from the Hot Rod which did 1.4 60’s.
Traction bar.
JJSPEC Racing's 1995 Honda Civic Hot Rod Chassis(Race Car, VIN N/A) $2700:
Chassis only. Comes with:
Chromoly 12 point cage certified until 2010 with parachute mount wheelie bar mounts
1 piece rear axle setup that will accommodate factory or aftermarket brakes
Spare tire well removed and replaced with Aluminum
Eibach Springs Rear
Competition Engineering rear shocks
1 piece MB Products fiberglass front end
MB Products trunk lid
Lexan windows
Lightened Factory doors
Cromoly Wheelie Bars
24 foot enclosed trailer. This is a great unit for hauling your race/show car. Has extra height roof, wide side door that you can bring a four wheeler through. Has some minor damage on R/F and R/R. Comes with a weight distribution hitch($400 value) and spare wheel(needs a tire). Paid $6500 new, asking for $4200:
Wiseco Pistons PN#6566M81 B Series 81MM High Compression. Around 11.5-1 depending on head, head gasket thickness, etc. Around 1000 miles. $250:
H22 Killian's porting head w/BC springs/retainers. The retainers are not in the pic but have been since installed in the head: $1000
BC H22 Stage 3 Turbo Cams $325
BDL H22 Fuel rail(see above photo) $75
BDL 72mm throttle body(see above photo) $250
H22 Trans w/ welded spider gears. This was a spare unit to be installed in between rounds when there was not enough time to put the LSD in another trans. There is no picture but will get one if you need one. Looks like a stock tranny on the outside. $300
Kirkey drag seat(race car not included) $75
Halon Fire Supression System:$350
Safecraft LT10AAB. This system comes with a pull style cable for activation. Pic is a sales photo. Can get a pic of the system if you need it.
Used Aeromotive Eliminator pump $300 (this pic is of an A1000 but it looks similar to the Eliminator):
H22 forward facing exhaust manifold with dual 38 v band flanges. Puts a S37x compressor housing in front of the rad support of a DC2 $600:
One more pic with turbo above^^^
GReddy Kit for D-Series. Complete with everything including fmic. Does not have engine management. Came off of my personal car for upgrade $800. Can be installed for total of $1200 less ems and additional parts.
Misc fuel rails. Stock D/H/F/K $50. Aftermarket D $75:
Plenty of random intake and exhaust stock manifolds. Mostly Honda stuff but there is one 4G63 intake manifold. $60 per intake and 40 per exhaust 100 for Headers. PM if you have one you need:
H Series Skunk 2 Manifold from JJSPEC Racing Hot Rod(Ran 9.2 @158 on it)$225:
Complete H22 head from valve cover to headbolts $225:
ECUs. OBD1:P0A P14 PT6 PO6 P2P PR4 P2E PT6 OBD2: POB PAA K Series PNA
Stock Oil pans D/F/H Series $25
Stock Valve Covers $50 Can have bungs welded on for an addition fee.
JJSPEC Racing Lazer cut SS keytags $5.00:
Reply With Quote
Originally Posted by Echonova
