H2B adapter place & flywheel spacer!

[Motivation]

what else is needed? may be interested.

Not sure completely, I can ask around.


Thanks everyone.

[civicnick]

Not sure completely, I can ask around.


Thanks everyone.

you need the halfshaft adapter, drivers side mount adapter, the pan head screws for the adapter plate, extended bolts for the flywheel, an angle grinder for the back of the block to make the drivers side inner cv boot fit past the block, and a sledge hammer/cut off wheel (depending on the chassis its goin in) to the drivers side frame rail to make the motor actually fit in the car.

[Motivation]

you need the halfshaft adapter, drivers side mount adapter, the pan head screws for the adapter plate, extended bolts for the flywheel, an angle grinder for the back of the block to make the drivers side inner cv boot fit past the block, and a sledge hammer/cut off wheel (depending on the chassis its goin in) to the drivers side frame rail to make the motor actually fit in the car.

Thanks.


I will check on the pricing of shipping when I get to work. Shouldn't be much and I will go halfway on the shipping prices. I'll let you know tonight to see if still interested.

[Jdm94Coupe]

you need the halfshaft adapter, drivers side mount adapter, the pan head screws for the adapter plate, extended bolts for the flywheel, an angle grinder for the back of the block to make the drivers side inner cv boot fit past the block, and a sledge hammer/cut off wheel (depending on the chassis its goin in) to the drivers side frame rail to make the motor actually fit in the car.

doesn't sound worth the trouble to do the swap, lol.......

glws op