FS: Acura RSX-S Custom Turbo Kit 400WHP+

[lxpaulxl]

This kit was pieced by me when I decided to upgrade my turbo from the Greddy kit. Yes, this did come from a blown motor but there is no damage to the turbo or any other parts of this car. The turbo has very little or no shaft play. The motor blew due to failure of the oil pump, causing me to spin a bearing and throwing a rod. I will highly recommend for whoever buys this kit to invest in a oil pressure gauge and either to upgrade the oil pump or run a stiffer spring in the oil pump.

This kit will come with
- Precision SC6176S .70 a/r Compressor, .63 a/r Exhaust 5 bolt (only 1000miles)
- Revhard Manifold
- 38mm Tial Wastegate /w 5 psi Spring
- 3'' 5 bolt Custom Downpipe
- TD Autowerks Dumptube
- 3 Bar Map Sensor /w MSD 3-Pin Weathertight Connector
- Greddy FMIC
- Greddy Type RS BOV
- RC 750cc Injectors
- RC Injector Clips
- Autometer Gauge Pod
- Autometer Boost Gauge
- Fast Turbo Oil Lines
- Greddy Oil Filter Sandwich Plate
- Unforgettable 3'' Testpipe /w o2 bung welded on for tuning
- Ebay 3'' Turbo Catback
- All Clamps, Couplers, Gaskets, Bolts.
- Hondata K-Pro Map tuned for up to 14 psi @ 93 Octane (Not ECU)

All you would need to get this kit working is Hondata K-Pro (or a engine management of your choice), colder spark plugs and a 255LPH Fuel Pump and you're good to go. If you would like to make more boost, you can use the K-Pro Boost settings or buy a boost controller.

This kit made 421WHP and 274WTQ @ 14 psi











I have invested well over $4000 in parts, misc parts and tuning.
Asking price: $3300 FIRM
Price drop: $2900
Willing to trade for a B series turbo kit.
Local pickup only.

Parts of the kit is still on the car but will be taken off ASAP if a buyer comes through.

If you have anymore questions, feel free to email me at [email protected] or PM me.

[B_Hoov]

that bov flange looks like garbage where it was welded...why does everyone assume they can weld???

[Vteckidd]

NICE KIT, made great power!

GOOD DEAL TOO!

[Rsxguy]

great price and badazz kit

[lxpaulxl]

Bump

[lxpaulxl]

Up.

[HeLLo iM iZzY]

Part it out on CRSX.

You'd make more money that way.

[lxpaulxl]

Part it out on CRSX.

You'd make more money that way.

Rather sell as a whole kit.

Bump.

[lxpaulxl]

Bump

[97_c1vic]

bump for paul

[lxpaulxl]

Up

[IndianStig]

that bov flange looks like garbage where it was welded...why does everyone assume they can weld???

function over form homeboy. that kit held up well and stood up to real world abuse so who gives a rats ass what it looks like?

can't believe this is not gone yet. would this fit a k20 ep3? or maybe a k20 swapped car?

BUMP FOR PAULINA

[lxpaulxl]

It'll probably fit swapped cars with some modifactions.

Bump

[ep9716]

bump for paul

[Djlin]

someone needs to get this and put down serious power

[MARLONSC]

is good for a civic si 02 up

[lxpaulxl]

is good for a civic si 02 up

I know the manifold will fit but I am not sure if the turbo will clear the firewall in a civic si. As for the intercooler piping, you might have to cut and fab some pipes to make the intercooler work. RSX and the EP3 are similar in some ways, so I am not too sure if it could work.

[Liltoua]

Paul is my Idol! This set up is freakin fast! Buyer will be supo happy with it!

[lxpaulxl]

Up. Nobody wants 400WHP?

[lxpaulxl]

Price dropped to $2900

[terrytowe22]

would u wanna just sell the intercooler in pipein lmk very interested.

[lxpaulxl]

would u wanna just sell the intercooler in pipein lmk very interested.

No but I do have extra Greddy intercooler piping. I'm not too sure if it has everything but most of it. PM me if you are interested.

[lxpaulxl]

Bump. Willing to trade for a B series turbo kit.

[ronin]

still got this set up hu, well pm me, if you can get my rsx s on the road, i'll need that turbo set up.