BRB Whoreslounge

[OneSlow5pt0]

Sounds good. You still got my number? If so give me a call/text tomorrow and I'll reply when I leave the house.

i lost my old phone,so PM me it.......u got a good spot?

[03RCode]

i lost my old phone,so PM me it.......u got a good spot?

Of course. Right at 1/2 mile long, gives plenty of room to slow down. I'll PM you the number now.

[DSGMach1]

Ummm.. The pearl yellow convert. one with the 4.6 and 3.73 that use to belong to your bro. And also a White with blue racing stripes late 60ish mustang with ummm. A 4.6L engine with edelbrock carb on top. What else do I remember.... Talyorrite?

The white one didn't have blue stripes but yea tis lil ole me. I am just whoring up the BRB thread. I have no other affiliation with them no matter what some people like to say....you know who you are.

I am Team FTW. We are holding strong with our 2 members WOOT!!

[OneSlow5pt0]

Of course. Right at 1/2 mile long, gives plenty of room to slow down. I'll PM you the number now.

alright cool...whos videoing?

[Motivation]

ASAP lurking the BRB secton... How's it going guys?

[OldsTech]

The white one didn't have blue stripes but yea tis lil ole me. I am just whoring up the BRB thread. I have no other affiliation with them no matter what some people like to say....you know who you are.

I am Team FTW. We are holding strong with our 2 members WOOT!!

LOL.... Thats kewl. What you been up too... i was reading some of your post. Mach1 runs around 13.8ish right? What does the yellow one run with the 3.73? Got some pics or a cardomain page?

[DSGMach1]

i hate u

Come on now. Thats not really an area to go into. How many high 13 sec corvette's are there? I know I've seen a lot of them.

[DSGMach1]

LOL.... Thats kewl. What you been up too... i was reading some of your post. Mach1 runs around 13.8ish right? What does the yellow one run with the 3.73? Got some pics or a cardomain page?

Yeah it runs around there. Never got to run the yellow one at the track
Here is the only pics I have of it right now.

[Grimm Reeper]

ASAP lurking the BRB secton... How's it going guys?

Not too much man, I actually tried to call you today.

[OldsTech]

Yeah it runs around there. Never got to run the yellow one at the track
Here is the only pics I have of it right now.

Nice indeed. I worked at Griffin Ford, For a while. I wasn't impress with the Mach1 I drove. But maybe I wasn't driving it right or something becuz 13's is a very respectable number.. I love the tires nice and fat. Wheneva my military bonus comes in I goin to install some 275/60/15.

[Motivation]

Not too much man, I actually tried to call you today.

did you?

I usually keep my phone on silent when I am at work, just in case customers are around... Wonder why it never showed up though. sorry about that.

[DSGMach1]

Nice indeed. I worked at Griffin Ford, For a while. I wasn't impress with the Mach1 I drove. But maybe I wasn't driving it right or something becuz 13's is a very respectable number.. I love the tires nice and fat. Wheneva my military bonus comes in I goin to install some 275/60/15.

Yea the Mach 1's need some gears in a bad way. There is no low end power but above 4k rpm is a happy place. My dyno graph was flat as can be from 4k to redline. I need to get a converter so I can rev it higher too. The stock converter can't handle anything over 6k rpm or it will start ballooning, but the motor makes power way past that.

You going to the track with everybody on the 31st?

[OldsTech]

Yea the Mach 1's need some gears in a bad way. There is no low end power but above 4k rpm is a happy place. My dyno graph was flat as can be from 4k to redline. I need to get a converter so I can rev it higher too. The stock converter can't handle anything over 6k rpm or it will start ballooning, but the motor makes power way past that.

You going to the track with everybody on the 31st?

Yeah I didn't rev it that high. It was a customer car. I had to do a engine swap on it. It was like the 3rd engine in the car. he was a idoit, cuz he call ford complaining that we didn't put his headers back on. And ford was like really header huh? Warranty VOIDED LOL...


Im really trying. Im going to Allspeed dyno Wednesday. And hopefully will have the 455 installed when I go to the track on the 31. But I don't except anything out of the 455. IDK if you read it or not. But Im trading the 307 in the camaro for a Olds 455. But the 455 is completely stock and it is a smog engine. So the 307 might have more Hp then the 455 does but IDK becuz he guy doesn't know what year it is. But I know the 455 will have more torque so at least it will burn the tires better LOL....

[Just_CHill]

[Tree]

chris did you get it done? what are the number?


oh yeah to everyone.. i post my whip to to see what going to happen

[ACCORDPRIDE]

chris did you get it done? what are the number?

x2??????????

[Just_CHill]

Well as far as numbers, I will post all that info tomorrow. Let me tell you an even better story from tonight!

So just get through tuning (MAINSTREAM IS THE SHIZNIT!!!!!) and we finally head home after a great day. I get onto 20 and get on it just to test out certain features. Pulls great, until I see a shit load of smoke or what seemed like smoke behind me. Well, we pull over and I sniff this smoke like substance. No oil, not gas..... hmmmmm that's antifreeze. So, instead of driving 70+ back home, I got to drive 40-45 alllllll the way back to Henry County! THANK GOD that it's cold outside or I wouldn't have made it home tonight. But yeah, funny story of the night. Time for some sleep now! Talk to you all tomorrow! Laterz!

[03RCode]

alright cool...whos videoing?

Good question. Got your girlfriend or anyone with you?

[03RCode]

Yea the Mach 1's need some gears in a bad way. There is no low end power but above 4k rpm is a happy place. My dyno graph was flat as can be from 4k to redline. I need to get a converter so I can rev it higher too. The stock converter can't handle anything over 6k rpm or it will start ballooning, but the motor makes power way past that.

You going to the track with everybody on the 31st?

I miss my mach 1 Good call on the DD Mach wheels out back, always liked the look of the stock wheels, so I think thats the perfect setup.

[DSGMach1]

I miss my mach 1 Good call on the DD Mach wheels out back, always liked the look of the stock wheels, so I think thats the perfect setup.

Thanks, I was really lucky to get these wheels now that AFS quit making them. The people on the registy go nuts when ever someone puts a set up for sale. I was even luckier to get one of the few sets that have black inserts.

I saw the pics of what happened to yours. That sucked bad, but glad you were alright. I think I read somewhere here you have a fox body, right? If so got any pics of it?

[03RCode]

Thanks, I was really lucky to get these wheels now that AFS quit making them. The people on the registy go nuts when ever someone puts a set up for sale. I was even luckier to get one of the few sets that have black inserts.

I saw the pics of what happened to yours. That sucked bad, but glad you were alright. I think I read somewhere here you have a fox body, right? If so got any pics of it?

I've posted up a few of it on here in the Foxbody/5.0 pic thread, but I don't really have any good ones yet. I was hoping to make it to the track on the 31st but can't line up a truck and trailer, so it doesn't look like I'll be making it after all.

[Grimm Reeper]

Buy my shitzzzzz FS: B16 head and other parts

[OldsTech]

Morning Morning!!!!

[Just_CHill]

Good morning.

Hypnotoad and O3RCode, I don't mind you guys being in here and all but the whoring up random shit that has nothing to do with this crew and not really even talking to anyone in our crew almost your whole convo (until you spoke to Mach1 and Olds) kinda bugged me. I know this is a whores lounge, but take your convo's with other people somewhere else. Not being an ass (maybe I am but oh well) but if and when we get our own section, you and another random person just can walk up and have a off the wall convo in there. Thanks.

Edit: I meant crew not club. But it's fixed now!

[LizBiz]

I'm cold as damn shit fuck ass!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[Just_CHill]

I'm cold as damn shit fuck ass!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I haven't went out there! It's like 22 out there! I will be fixing my car in that weather!

[Grimm Reeper]

I'm cold as damn shit fuck ass!!!!!!!!!!!!!!!!!!!!!!!!!!!!

I can warm you up, both inside and out

[LizBiz]

I can warm you up, both inside and out

I'm sure you can.

[RickyBobbyV6]

im gay



look at my gay ass bike

[Grimm Reeper]

I'm sure you can.

[LizBiz]

lol, but your no good a secrets

[Grimm Reeper]

lol, but your no good a secrets

If you say so


but when everyone see that you like to chill'n with me more often than other times, it would be a dead give-a-way lol.


I'm just that addictive

[Axon360]

so Chris how's that fog machine rollin'? U find the leak yet?

[OldsTech]

I wish they would leave the F***ing hangar door closed at F***ing work. I can hardly f***ing type. LOL. My dyno date might have to be moved again... I ordered a lockup converter kit today ( which should give me like at most like 5% more hp when locked) . And he said it will most likly get heard Thursday MAYBE Wed (I hate ordering from CA)... If the tracking number looks good for Wed. I might just be getting Sick Tuesday Cough.. Cough...

[Grimm Reeper]

so Chris how's that fog machine rollin'? U find the leak yet?

Knowing Chis, his azz is still in the bed

[Just_CHill]

Yep, just woke up!

[LizBiz]

If you say so


but when everyone see that you like to chill'n with me more often than other times, it would be a dead give-a-way lol.


I'm just that addictive

oh shoot!!! *falls over* Don't be sayin that kinda stuff to me!!!! *drool*

I haven't went out there! It's like 22 out there! I will be fixing my car in that weather!

you're always fixing your car

[Just_CHill]

FOUND THE LEAK!!!!!! THANK YOU GOD!!!! Now to fix it.

Oh yeah, haven't forgot about the numbers yet!

you're always fixing your car

That's the life of building a Honda.... well heck, that's the life of building any car!

[OneSlow5pt0]

nah,i think its just hondas..chris

[p3tey2]

Where was the leak at bro? Glad u found it