Can't decide which wheels to get...

[iloveboost]

I'm debating between these two sets of wheels. Switching to 18" wheels all around in order to run a drag radial/stickier tire.

I wish I could get the CCW Classics but they won't clear my calipers. The C14 wheel is just as light and stronger than the Classics.

18x12 CCW SP500 - Looks good but little tire options, 3lbs heavier per wheel, pain to keep clean. Currently have these on my car, just in a 19"






18x12 CCW C14 - Light, strong 1 pc wheel, powdercoated black. Easy to keep clean, not as 'pretty' as the SP500.

[Hunter02SS]

I would stick with the 500's. I pm'ed you about your rear wheel's. I want them if they are still available.

[81911SC]

I like the black look. I not for polished so much, esp on Vettes.

[iloveboost]

The polished wheels are nice. They get a ton of looks and show the calipers nicely.

I'm the type that would rather have 12lbs less of rotating mass than looking pretty.

[SpeedMonkey]

whats the lug pattern on your Z?

[iloveboost]

5x120

[SpeedMonkey]

i think if possible.... go for some 18" SF challenges... in gunmetal NOT BLACK like in the picture...

[iloveboost]

Have to get them made in a custom offset in order to clear my C6Z06 calipers without them bulging out too much.

[SpeedMonkey]

Have to get them made in a custom offset in order to clear my C6Z06 calipers without them bulging out too much.

i've seen a few vettes withem on the 350zforums with i beleive 350z offsets, people sold their 350z's bought vettes and swapped the wheels over.. (most those cats had the Brembo brakes too) have you looked into them?

EDIT: IM WRONG.. i just realized they themselves said they bought the same wheels over again...

wrong lug pattern.. 5 X 114.3 =(

[lightspeed]

i like the ones on that orange one in the top pic...

but for God's sake, dont paint your car that hideous color....

[ct9a gsr]

get some GSR blades and spray paint them pink... that'd be hot.

[iloveboost]

get some GSR blades and spray paint them pink... that'd be hot.

Can only get a 16" wheel to clear the C5Z brakes. I have C6Z brakes and I'd have to get smaller rotors in order to run a 17" wheel.

Mmmm.... 17x12" wheel.

[lightspeed]

Can only get a 16" wheel to clear the C5Z brakes. I have C6Z brakes and I'd have to get smaller rotors in order to run a 17" wheel.

Mmmm.... 17x12" wheel.

Man up and get the smaller brakes You cant have everything LOL Im going to break down (no pun intended) and do smaller rear rotors on my car too, but I was opposed to that for a long time. Sometimes you got to do what you got to do You have big brakes up front...

[iloveboost]

Man up and get the smaller brakes You cant have everything LOL Im going to break down (no pun intended) and do smaller rear rotors on my car too, but I was opposed to that for a long time. Sometimes you got to do what you got to do You have big brakes up front...

17x12 would be sick, but an 18x12 would suffice.

I may switch it up to 17s once I get the stroker and twin turbo/spray it.

[Tracer]

I like the SP500.

[Tracer]

Just wish you could get the Classics. I heard they look good on Vettes

[iloveboost]

Just wish you could get the Classics. I heard they look good on Vettes

What do you know? You drive a Yaris on 14" wheels.

[Tracer]

What do you know? You drive a Yaris on 14" wheels.

Sorry for my input then.

[ct9a gsr]

Sounds like you vette folks spend more money on wheels and rubber than I do on turbo setups. -_-;

[_Christian_]

why not keep the 19s?

[GangstaCoupe]

I know this doesnt relate, but heres a C6 Z06 with the ccw drag pack on it. Sorry the pic is so shitty my camera phone sucks at night.

[iloveboost]

why not keep the 19s?

There aren't any sticky tires available in 19s.

I know this doesnt relate, but heres a C6 Z06 with the ccw drag pack on it. Sorry the pic is so shitty my camera phone sucks at night.

I called and spoke with Chip at CCW and he advised the 18x12 Classics wouldn't clear the C6Z06 brakes on a C5Z06. But on top of that, he said the Classics are the weakest wheel and any big potholes/speedbumps would likely bend/damage the rim.

[Tracer]

Classics look the best. They look great on my car.

[AnclyT]

the ones you have look badd

[dingo7]

man the c14 in black looks sick man and cant beat light weight 1 piece

[cactusEG]

i like the ones u have on there already

[NevrNufTorq]

stick with what you have now, looks bad to the bone and get new 18x12's for the rear and dump the 19's!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 1st of july the new m/t dr's in 345/30/18 are out. already got 4 on order, 2 for the vette and 2 for the supra!!! just thought you might wanna keep that in mind before you buy bfg's

[iloveboost]

I think I'll go ahead and drop the $1,900 for new rears and tires.

Anyone want to buy two 19x11" CCWs?

[iloveboost]

Called John at CCW and seems he cannot make 18x12s in the SP500 to clear my calipers.

I'm ordering black CCW C14s in 18x12s.

[Big Baller]

c14s are way hot in person, get the c14s

[iloveboost]

Ordered the C14s earlier this week.

18x10f and 18x12 rear w/ 335 drag radials.

[Black R]

stick with the 5-spokes you have. those other ones look too "busy".

maybe just have your wheels painted/ powdercoated black?

what about a custom set of work wheels? the meister s1's can be had in custom sizes.....