Zen Motors - The Run Down

**GGPIS3** · 01-05-2009, 10:22 AM

We are a facility ready to take on any job. If you need basic maintenance to repairs to fabrication (TIG welding) to detailing to even finding you the right vehicle, we will treat you right! We have an ASE cerfified mechanic on site that is anxious to work on YOUR car! Being that we are new, we are very competitive with our pricing. Call today or post away to find out what we can do for you! 770.932.6302

**GGPIS3** · 01-05-2009, 05:29 PM

Services we provide:

1. Authorized and Licensed Used Car Dealer / Auto Broker

-We can get you pretty much any car you want!

-If you know what you want, we charge a flat broker fee of $1000. So you will pay for the car, plus the fee, plus tax,tag & title. thats it!!! you don't have to worry about another used car dealer scamming you for your hard earned money! we are here to save you money and create a customer for life!

2. Maintenance & Repairs
-We have multiple mechanics who are ready and willing to take on any job we throw at them. From basic maintenance to repairing and rebuilding damaged motors, they do it all. You can rest assured the job will be done right no matter the cost agreed upon. We will not cut any corners!! We will be very careful, respectful and meticulous with your car!! Give us a call and see what we can do for YOU!!

3. Installations & Fabrication (Tig welding)
-We can install any part you have, whether it is oem or aftermarket, it isn't a problem. Currently, we have a special labor rate of only $80/hour. This rate will not last long, so give us a call to set up an appointment today!!!

-If you have anything that needs to be welded, we can handle that as well. Stop by or call for a quote today!!

4. Motor Swaps
-Doesn't matter what motor or what car. We can extend wiring harnesses to custom fabricating engine mounts. We do prefer working on Japanese vehicles however we are open to other makes and models. Give us a call to see what we can do for you!

5. Detailing

-We have a very experienced detailer. You will need to schedule an appointment for a detail whether its a small or big job. Our rates will vary pending on the condition of the vehicle at hand. Average cars, small to medium, will range from $140-250 pending on condition. Larger cars to SUV's will range from $175-275. But as stated earlier, the price will vary based on the condition and size. You will not be disappointed!

6. Audio Solutions

-I will post more information up in the near future, but we now have 2 experienced audio installers at our disposal. If you need a radio installed, amps, speakers, need a box made, fiberglass, car pc, pretty much anything audio/video/12V related, give us a call and see what we can do for you!

7. Parts Retailer

-We sell parts! lots and lots of parts! whatever you need, we can get it.

stay tuned for a new and improved website. www.store.zenmotorsllc.com

**Scotsman** · 01-05-2009, 05:30 PM

do ya'll do any tuning?

**GGPIS3** · 01-05-2009, 05:32 PM

^ I do have someone who can tune, but we don't have a dyno at the shop yet. He can tune your idle as well as road tune the car with your permission.

What kind of car and what type of ems?

**Scotsman** · 01-05-2009, 05:33 PM

i have an odd vehicle for tuning(i dont even know if it can be) , i have an 05' saturn vue 2.2l , i am just wantin a lil more umpf out of it , any sugestions?

**GGPIS3** · 01-05-2009, 05:41 PM

can't say i have alot of or any experience with a saturn, however if it has some form of an ems, it can be tuned. how much umpf are you looking for? what type of budget are you working with?

**Scotsman** · 01-05-2009, 05:48 PM

not sure if it has an ems , maybe another 20-40 whp , slim budget atm , but lookin more towards the spring

**GGPIS3** · 01-05-2009, 05:53 PM

for something that small, i would consider a small shot of nitrous. you could get all the bolt-ons as well with some form of a fuel computer/tuning. either way should yield you 20-40 whp.

**BlueHatch** · 01-05-2009, 08:53 PM

needs a big shot

**GGPIS3** · 01-06-2009, 09:31 AM

^^ lol... i don't know about a big shot. no idea how much those motors can handle. i would assume a 40-50 wet shot should be viable, but i would have to do some research before suggesting a safe size of shot.

is nitrous an option for you?

**Scotsman** · 01-06-2009, 05:01 PM

kinda leary of the juice

**GGPIS3** · 01-06-2009, 05:30 PM

well then, you could do all the bolt-ons with some form of fuel computer to optimize the power.

**Scotsman** · 01-06-2009, 05:33 PM

i am def lookin into intake and a header , any recommendations for sites or shops?

**GGPIS3** · 01-06-2009, 05:43 PM

i did a quick search and i have to say, i couldn't find much at all in terms of performance parts. we could custom make you an intake as well as an exhaust if it fits your budget. we would have to take a look at your car in order to give you a quote.

**Scotsman** · 01-06-2009, 05:44 PM

Originally Posted by GGPIS3

i did a quick search and i have to say, i couldn't find much at all in terms of performance parts. we could custom make you an intake as well as an exhaust if it fits your budget. we would have to take a look at your car in order to give you a quote.

where exactly are ya'll located? , i could swing through on thursday after work

**GGPIS3** · 01-06-2009, 05:49 PM

3246 Buford Hwy. Suite #201 Duluth, GA 30096

Between Pleasant hill and 120, but closer to 120. Look for Atlanta Flooring and we are located in the back. do you know what time you will be coming?

**Scotsman** · 01-06-2009, 05:51 PM

Originally Posted by GGPIS3

3246 Buford Hwy. Suite #201 Duluth, GA 30096

Between Pleasant hill and 120, but closer to 120. Look for Atlanta Flooring and we are located in the back. do you know what time you will be coming?

really couldnt tell ya what time , i am in construction , and i wont know my jobs for the till the day of , and even then i never know what part of the metro area i will be in , what are your hours?

**GGPIS3** · 01-06-2009, 05:56 PM

our hours are probably just as crazy as your schedule. just give us a call on thursday after you get off.. 678 584 5404.

**Scotsman** · 01-06-2009, 06:06 PM

Originally Posted by GGPIS3

our hours are probably just as crazy as your schedule. just give us a call on thursday after you get off.. 678 584 5404.

**TallGuy** · 01-07-2009, 04:25 AM

Good guys and clean shop.

**GGPIS3** · 01-07-2009, 10:26 AM

^^ appreciate it bro!! you are more than welcome to come by anytime

although my boy jermaine was a little upset. he said theres only enough room for one of you at my shop lol. so yall might have to duke it out lol

**TallGuy** · 01-07-2009, 07:13 PM

Thanks man Ill be that that dude that just drops by and makes his self at home. you know the one that drinks your soda, eats the left overs and turns on all the lights...lol oh and tell your buddy any place any time ..lol later

**GGPIS3** · 01-07-2009, 08:50 PM

lol... cage match @ zen motors!!

**Axix23** · 01-09-2009, 12:27 AM

i remember yall from that meet a few months ago..

**The BUCKY** · 01-09-2009, 12:41 AM

zen is the win. these guys couldnt treat a customer any better. one stop shop

**GGPIS3** · 01-09-2009, 02:57 PM

^^ appreciate it bro!!

**alieyuyang88** · 01-12-2009, 08:00 PM

I have a d16zc short block and a y8 head. needs to be reassemble. wondering how much you guys charge for the work? gasket i have. how long will it take for the job to be done. let me know wassup.

**olivertwist** · 01-12-2009, 08:44 PM

cluch install in sentra b13 price

**GGPIS3** · 01-13-2009, 12:35 PM

pm's sent

**Sixth_Vang** · 01-16-2009, 09:21 AM

Talked to these guys and will def. be taking me Z there, PHENOMENAL people.

**TCM** · 01-21-2009, 01:35 PM

Can you PM me a rough estimate of an SR20 install with A/C and PS into a 95 S14. would prefer it tuned to pass a sniffer.

**Corey99** · 01-22-2009, 06:09 PM

These guys are great! Excellent shop with experience! Evo clutch install done...BOOM!!!

**GGPIS3** · 01-26-2009, 11:15 AM

^^ hah... thanks bro!

**DSGB-GTS** · 02-05-2009, 07:19 AM

I have a broken hanger on the axleback part of my exhaust that needs to be tig welded back. It is still on my car but the exhaust leak is driving me nuts. How much would you guys charge to reweld that for me? It shouldn't take more than 15 minutes and that's including removing the exhaust. Thanks in advance.

**DSGB-GTS** · 02-12-2009, 08:47 AM

I have a Hotchkis front sway bar that I need to have installed. How much would you charge to install it? Here is a link to the install guide.

http://www.newcelica.org/forums/showthread.php?t=230038

**redr1** · 02-28-2009, 01:32 AM

Do you guys work on Vettes? I have an 01 z06 with head cam bolt ons and I need a clutch installed. I just got the Z and the previous owner gave me a twin friction rps clutch with alum flywheel. I also think I need a slave and might as well do the master too. Let me know!

**GGPIS3** · 03-02-2009, 06:34 PM

^^ pm replied

**geoff** · 07-14-2009, 08:25 AM

hey i have a 93 honda civic with a z6 swap. it ran low on oil from a leak and it has a rod knock now. how much you guys charge to rebuild a bottom end or replace rod bearings and reassemble? lmk

**ZenMotors** · 07-14-2009, 09:02 AM

Originally Posted by geoff

hey i have a 93 honda civic with a z6 swap. it ran low on oil from a leak and it has a rod knock now. how much you guys charge to rebuild a bottom end or replace rod bearings and reassemble? lmk

Give me a call and we can discuss it.

Looking forward to your call.

Take care!

**jr4mny** · 07-30-2009, 01:47 AM

well hopefully if all goes well ill be seeing you guys on monday about some tires

Thread: Zen Motors - The Run Down

Thread Tools

Display

Zen Motors - The Run Down

b13

Posting Permissions

About us

Announcement