K series swap parts

[1civic]

Blah

[spank]

watch out for the fake kpro they everywhere

[1civic]

AEM v2 like 1075 shipped.. Was thinking just to save and go that route!

watch out for the fake kpro they everywhere

[spank]

also you can't use the 05-06 prb ecu and engine harness because it's (drive by wire) unless you get a k-tuned conversion harness...you need 02-04

[1civic]

Mine is not drive by wire, but yes pin outs are different from 02-04.. Took me 4 hours to label and wire since I was going to use the stock ecu for now.. Problem though is the difference from low current to high current, so tranny needs speed convertor.. And yes jumper harness is now needed since I wired it.. found it, but the biggest feature I was looking at on the AEM was the traction control.. Something kpro does not have, not to my knowledge anyways!!

also you can't use the 05-06 prb ecu and engine harness because it's (drive by wire) unless you get a k-tuned conversion harness...you need 02-04