FS Amazingly Clean 00' Civic Si B16 swap Athens

[BORICUAWRX]

SOLD

Make:Honda
Model:Civic Si
Year:2000
Mileage:79,xxx
Options:Power Everything
Mods:See Below
Engine:B16A2n OBD2
VIN#:Available upon request

NEW PRICE OF $9,400 OBO. MORE PICS AT BOTTOM, AND WING IS GONE.

This is my 00' Honda Civic Si the body has 77k. I just had a B16A2N Obd2 longblock put in a few weeks ago. The engine came straight from JAPAN and is estimated at 50,000km. It was put in by an accredited shop here in athens, and runs like a champ. Started right up with no smoke or any probs. I just got back from a weekend trip to NC where I got 34mpg the whole way n didnt have any probs.

The mods it has flow well together, and are minimal. It has an AEM intake, with AEM fuel rails n injectors. The never used 35 dry shot of NOS. Full catback exhaust, and a no name short throw shifter. I also have Sparco pedals, and a moniter in the car. I am sure im forgetting something, but u get an idea with the pics

I purchased this car from my best friend, the original owner, who had it right up to 77,500 because he gave me an amazing deal on the vehicle. I bought it with a blown headgasket n that is the reason for the B16. I love the car it runs great, but I just like RWD more, and I almost never drive it.

The car comes nitrous equipped, but I HAVE NOT sprayed on the new engine, and I AM NOT GOING TO SPRAY. It is running a 35 dry shot. The car itself is in pristine condition. The back seat has had passengers in it twice. The interior is PERFECT. NO FLAWS whatsoever. The exterior is also in pristine condition with only one or two rock chips on the whole body, and a small dent right below the taillight on the right side were someone backed into me. The car has a clean and clear title in hand.

The reason for selling is I found a great deal on an S14 that I want to jump on. PRICE is $9,600 OBO. There are SI's with original engines and more miles selling for $9,800 all so I believe this is a fair price. If you do not please tell me why, and or submit a reasonable offer. PS PLEASE DONT TELL ME THAT THE WING IS RICEY... I KNOW, BUT IT IS STAYING FOR THE BUYER TO DECIDE WHETHER THEY WANT IT OR NOT. DONT TELL ME HOW MUCH U HATE IT. THANKS. NO TRADES AT THIS POINT

[aaronfelipe]

Might be alot easier if you resize those pics,

[BORICUAWRX]

Yeah this is my first post... Im workin on it now


Here are the new pics for the car without the wing.

[silversol]

POOR SI! do you have the stock parts to put back on?

[BORICUAWRX]

Yes.. I have all stock parts.

[BORICUAWRX]

How did I know this shit was going to start. I HAVE ALL THE STOCK PARTS. If you dont want to buy the car then don't post anything.

[TRDwasiq]

nice car except that wing

[Raijin]

nice car except that wing

word. that thing would look better wingless. but it is indeed super clean and definitely a sweet car. consider this a bump ^_^v

[Black Mamba]

nice car except that wing

and the kits.

[WhiteAccord]

ehhh its ok... but G/L on sale... rice...

[BORICUAWRX]

Does price seem accurate???

[aaronfelipe]

All stupid comments will be deleted.

[BORICUAWRX]

Thanks for the free bumps guys. I feel u on the wing, but I figure that whoever the potential buyer is can take it or leave it. Either way...

[Sammich]

LOL @ bedwetters truck

bump for a nice SI-wing=no flyaway..

[MachNU]

Dam i always wanted an SI....to bad this wasnt for sale a few months back... That thing without wing, black headlights, and tinted windows and taillights = HOT!

[devin]

if you put the stock front bumper on and take that wing off you could sell that thing really quick.

[1000cckiller]

if you put the stock front bumper on and take that wing off you could sell that thing really quick.

exactly

[Frög]

if you put the stock front bumper on and take that wing off you could sell that thing really quick.

+ side skirts and rear bumper.. but seriously, put it back to stock and sell the bodykit on ebay some rice boy will pay you alot for that kit, im sure..

Good luck with the sale!

[BORICUAWRX]

Ok I will try to do that this weekend. I'll get new pics up as soon as I can get the wing off, and a new front bumper, but other than that any thoughts???

[devin]

nah, that should do it.

[2.0civic]

how does a car with a b16 stock have a swapped b16?? and how is it a JDM "a2"?? just curious

[Sammich]

how does a car with a b16 stock have a swapped b16?? and how is it a JDM "a2"?? just curious

read n00b

the owner he bought it from blew the engine so he replaced it when he bought it

[2.0civic]

read n00b

the owner he bought it from blew the engine so he replaced it when he bought it

like i said, lol, just curious...theres no such thing as a "jdm" a2 either....

[Sammich]

like i said, lol, just curious...theres no such thing as a "jdm" a2 either....

o...didnt pay attn to that i see 'jdm' this and 'jdm' that so much til i dnt pay attn and i just look at the block stamp now..

[2.0civic]

o...didnt pay attn to that i see 'jdm' this and 'jdm' that so much til i dnt pay attn and i just look at the block stamp now..

its very trite now with all the non knowledgable people saying JDM about everything

[preferredduck]

how does a car with a b16 stock have a swapped b16?? and how is it a JDM "a2"?? just curious

2nd gen jdm b16, 92-95, same thing i have in my car. free bump for an si owner

[devin]

i was just thinking the same thing..

[spacelion]

YOOOOOOOOOO I HEARD THIS BAD BOY CAN HIT MACH 5!!!!!!

Part this thing out and put the stock stuff back on. You'll get more money that way. Plus, you'll never sell it looking like this. Just a little bit of advice. Good luck.

[eloist2]

HOLY WHALE TAIL BATMAN!!!!!!!!!

[2.0civic]

also what shop in athens did the swap?? me and my buddy went to an "accredited shop" they told a buddy of mine when they did his b16a swap it was a CTR engine with 210 hp to the ground ...i laughed my ass off the enitre time

[AnTi-PooN]

that rice kit actually wouldnt look bad if there wasn't a wing

[BORICUAWRX]

I just took the wing off, and I will snap some pics of it tonight. It looks SOOO much better. The wing was a JSP 83207, and it retails at $380. I will just try to sell that on ebay. So I guess the new price is $9,400 OBO

[BORICUAWRX]

Sorry yeah well the shop that the engine was put in at was Street Stuff. Anthony did the shop. As for the A2n on my invoice order from the PasswordJDM (place of purchase) it said B16A2N if that's not right then my bad. I dont know much about honda components. I was just going by the invoice. The engine was swapped because of the blown headgasket by the previous owner. Ill post pics tonight of the Car w/o bumper. I need to wash it to. Im sure that you guys will like it now w/o the wing, but I have to find something to fill the screw holes with. Any thoughts on filling the holes to look good?

[Sammich]

Sorry yeah well the shop that the engine was put in at was Street Stuff. Anthony did the shop. As for the A2n on my invoice order from the PasswordJDM (place of purchase) it said B16A2N if that's not right then my bad. I dont know much about honda components. I was just going by the invoice. The engine was swapped because of the blown headgasket by the previous owner. Ill post pics tonight of the Car w/o bumper. I need to wash it to. Im sure that you guys will like it now w/o the wing, but I have to find something to fill the screw holes with. Any thoughts on filling the holes to look good?

not really, all i can think of is either find a si spoiler(or ex spoiler) or just use black tape to cover them to keep moisture from gettin in them

[2.0civic]

Sorry yeah well the shop that the engine was put in at was Street Stuff. Anthony did the shop. As for the A2n on my invoice order from the PasswordJDM (place of purchase) it said B16A2N if that's not right then my bad. I dont know much about honda components. I was just going by the invoice. The engine was swapped because of the blown headgasket by the previous owner. Ill post pics tonight of the Car w/o bumper. I need to wash it to. Im sure that you guys will like it now w/o the wing, but I have to find something to fill the screw holes with. Any thoughts on filling the holes to look good?

HOW THE FUCK DID I KNOW THEY DID IT??

they are about as accredible as as whitney houston saying shes not a crack head

fill the holes with bondo or see if you can find some aircraft tape...

[2.0civic]

but seriously, about the shop that did your swap, ask them about the 92 GSR they did a b16a in recently and told their customer it was a CTR swap....

[Sammich]

LIRL @ ctr swap

[2.0civic]

LIRL @ ctr swap

thats what i said too...then they told him it had all this power and i was like "hate to tell you man but the highest all motor B series in the state only has ~30 more WHP then you?? somehow i doubt your stock 1.6 is that high...i think they added 100hp to it..."

[BORICUAWRX]

They used to have a really bad rap, but that was with the previous owners. Charley bought the shop, and has Andy and Dave doing the work. Anthony is unbeliveable with cars. He has done sooo many swaps n does them well. Im sure that ur friend had his car taken care of before the place was purchased by charley. Either way the car runs great. I can take anyone who wants for test drives on the weekend.

[2.0civic]

They used to have a really bad rap, but that was with the previous owners. Charley bought the shop, and has Andy and Dave doing the work. Anthony is unbeliveable with cars. He has done sooo many swaps n does them well. Im sure that ur friend had his car taken care of before the place was purchased by charley. Either way the car runs great. I can take anyone who wants for test drives on the weekend.

unless this was in the last 4-6 weeks than its the same people