Page 1 of 2 12 LastLast
Results 1 to 40 of 42

Thread: FS: 1995 Eg "VX" Hatchback 5spd.

Hybrid View

  1. #1
    Certified Gearhead
    Join Date
    Feb 2006
    Age
    44
    Posts
    279
    Rep Power
    0

    Default FS/FT: 1995 Eg "VX" Hatchback 5spd.

    Like the title says I have this 1995 VX Hatchback ''116,678 miles" for sale. I let my wife borrow the car to go shopping and she call me an hour later and told me "that she rear-ended into a F-250 at 5 mph, and that she did no damage to the truck, but the car was a little damaged." To some it all up I don't have the time to reaplace it so it's gotta go. She ran into the hitch and ball on the back of the truck. I have already removed the hood,fenders, and the bumper cover. There is no frame damage what so ever, and the car has a clean title and is in my hand. The car was my daily driver, nothing special lower'd and header and integra exhaust. Car has A/C, but needs to be recharged. The black enterior is in great shape no burns or wears. I get 41 mpg and change the oil every 3,000 miles the car runs great with no problems what so ever. The only parts that you would need to complete the car is a new hood,driver side fender,driver side head light and corner marker,radiator core support and a bumper cover, which can be purchased from Partstrain.com for $528.01 shipped to your door. I'm a motivated to get this project out of my garage,but please keep the lowballing to yourself. The car runs perfect right now, just needs those parts to finish it off. The car "I repeat runs great" just needs parts. PM Me with any questions. I would like the car to be sold by friday so just pm or post offers and I'll get back to you asap. Thanks

    FT: The only trade I will take is dirtbike "2 or 4 stroke" so please dont ask to make a trade unless you have a one of the above.Thanks

    First to bring $1,300 and it's yours! FIRM


    Forgot to mention, timing belt, water pump and brakes have under 8k on them.






















    Last edited by smokinbud247; 02-05-2007 at 07:17 PM.

  2. #2
    boricua chrisdohck's Avatar
    Join Date
    Jan 2007
    Location
    ATL
    Age
    37
    Posts
    1,123
    Rep Power
    20

    Default

    you are aware that there are egs on here for lower than 1500 that are in better condition but im not knocking u i still wish u luck on the sale hope u can get something out the car

  3. #3
    Certified Gearhead
    Join Date
    Feb 2006
    Age
    44
    Posts
    279
    Rep Power
    0

    Default

    show me 1 eg on here that runs perfect for 1500 bucks and has A/C and 116,000 miles and clean title and you can have it for that, sounds like a deal to me.
    Quote Originally Posted by chrisdohck
    you are aware that there are egs on here for lower than 1500 that are in better condition but im not knocking u i still wish u luck on the sale hope u can get something out the car

  4. #4
    superduper LLLLLLLLL
    Join Date
    May 2003
    Location
    Gwinnett
    Posts
    5,599
    Rep Power
    28

    Default

    a normal civic hatchback goes for that price..

    i'd imagine one that is wrecked should be lower

  5. #5
    LS/VTEC FTMFW!! SKUNK2GUY's Avatar
    Join Date
    Jul 2006
    Location
    lawrenceville
    Age
    39
    Posts
    964
    Rep Power
    20

    Default

    well now i know y you chose your screen name but either way g/l
    YEAH I LIKE TO PARTY!

  6. #6
    Banned
    Join Date
    Jan 2007
    Age
    40
    Posts
    187
    Rep Power
    0

    Default

    naw pimp 2200 aint cuttin it das 1000 dollars in parts labor n paint jus to get it normal again let it go for a stack (1000) and i take it off ur hands

  7. #7
    Certified Gearhead
    Join Date
    Feb 2006
    Age
    44
    Posts
    279
    Rep Power
    0

    Default

    Naw actually it's only $528.01 for the parts shipped to your door like I said earlier in my original post, and thats your loss you can't turn a wrench and do your own work, it would save ya some cash. I would fix it, but I work 60-70 hrs. a week and dont have the time to fix it myself.
    Quote Originally Posted by VTECrrRREADY
    naw pimp 2200 aint cuttin it das 1000 dollars in parts labor n paint jus to get it normal again let it go for a stack (1000) and i take it off ur hands

  8. #8
    superduper LLLLLLLLL
    Join Date
    May 2003
    Location
    Gwinnett
    Posts
    5,599
    Rep Power
    28

    Default

    pay $2000 for a wrecked car...

    you have to ORDER $528+ for parts, wait a couple days down time for everything to come in..
    install EVERYTHING onto the car, test fit the body panels, take EVERYTHING off the car, put it in a truck/suv, go to the store and have it estimated and painted, wait a couple days for down time, pick up the parts in the SUV/Truck.. and then install everything back onto the car
    and THEN... you have an AWESOME SUPER DUPER EG HATCHBACK with an IMMACULATE FRONT END all for $3000+ and a couple days of sweat!

    someone should jump on this!!

  9. #9
    Certified Gearhead
    Join Date
    Feb 2006
    Age
    44
    Posts
    279
    Rep Power
    0

    Default

    that's the way I look at it, $2000 for the car and $900 for parts and paint=$2,900 for a 95 hatch w/ 116,000 miles and a clean title, 95% of stock eg hatch's in good shape in this forum sell for between $2,700-3,400 bucks. bump
    Quote Originally Posted by AnclyT
    pay $2000 for a wrecked car...

    you have to ORDER $528+ for parts, wait a couple days down time for everything to come in..
    install EVERYTHING onto the car, test fit the body panels, take EVERYTHING off the car, put it in a truck/suv, go to the store and have it estimated and painted, wait a couple days for down time, pick up the parts in the SUV/Truck.. and then install everything back onto the car
    and THEN... you have an AWESOME SUPER DUPER EG HATCHBACK with an IMMACULATE FRONT END all for $3000+ and a couple days of sweat!

    someone should jump on this!!

  10. #10
    Certified Gearhead
    Join Date
    Feb 2006
    Age
    44
    Posts
    279
    Rep Power
    0

    Default

    sorry guys, I have recieved 49 pm's in the past 3 hrs. and just tryin to get to all of them sorry for the time delays on any info you need.

  11. #11
    Banned
    Join Date
    Jan 2007
    Age
    40
    Posts
    187
    Rep Power
    0

    Default

    Quote Originally Posted by smokinbud247
    show me 1 eg on here that runs perfect for 1500 bucks and has A/C and 116,000 miles and clean title and you can have it for that, sounds like a deal to me.

    my home jus sold one on here for 1500 like last week runnin no body damage

    FS 92 CIVIC HATCH

  12. #12
    Certified Gearhead
    Join Date
    Feb 2006
    Age
    44
    Posts
    279
    Rep Power
    0

    Default

    your off your rocker man, that car was a piece of shit I went a look'd at it last week, it had no A/C, interior look'd like ass, flat black primered car, no way to open the doors unless I bought a door popper, shit load of miles and a very lenghty car fax report on it and a salvage or black listed title man. But I'll take that cash off your hands for wasteing my time.
    FS 92 CIVIC HATCH[/QUOTE]

  13. #13
    Banned
    Join Date
    Jan 2007
    Age
    40
    Posts
    187
    Rep Power
    0

    Default

    so wussup u want cash or check homie

  14. #14
    I SHift at 10k Annihilation's Avatar
    Join Date
    Oct 2003
    Location
    30047-REDLINE, WAT REDLINE? 10k Shifts ALL day
    Age
    41
    Posts
    3,846
    Rep Power
    26

    Default

    i got a 1989 Cr125 with a fresh top end ...lmk if you would wanna trade for that


    same bike...jus mines got a white frame

  15. #15
    I SHift at 10k Annihilation's Avatar
    Join Date
    Oct 2003
    Location
    30047-REDLINE, WAT REDLINE? 10k Shifts ALL day
    Age
    41
    Posts
    3,846
    Rep Power
    26

    Default

    doesnt seem like it has the stock vtec motor in it....what motor is in it now?

  16. #16
    Certified Gearhead
    Join Date
    Feb 2006
    Age
    44
    Posts
    279
    Rep Power
    0

    Default

    The motor is a D15B8, man



    Quote Originally Posted by Annihilation
    doesnt seem like it has the stock vtec motor in it....what motor is in it now?

  17. #17
    Certified Gearhead
    Join Date
    Dec 2006
    Age
    45
    Posts
    328
    Rep Power
    19

    Default

    Great deal I'll take it off your hands next friday when I get my paycheck if you still have it around,which I doubt it at that price. check your pm lmk

  18. #18
    magical negro/photog .blank cd's Avatar
    Join Date
    Jan 2006
    Location
    Kennesaw, GA
    Posts
    12,103
    Rep Power
    39

    Default

    looks to me like that front end needs to be pulled out by a frame puller. labor's a biotch

    NIKON Squad member 01

    I HAVE SUBS AND CAMERAS AND LENSES FO SALE
    OF*C
    OEMFitment Crew Memeber 01

  19. #19
    Certified Gearhead
    Join Date
    Feb 2006
    Age
    44
    Posts
    279
    Rep Power
    0

    Default

    the frame is straight as can be, it's the radiator core support that needs to be replaced thats not the frame buddy and that is only held in with 4 spot welds and a couple bolts and the core support is only about 95-100 bucks, thanks for your wrong thought's.
    Quote Originally Posted by blank cd
    looks to me like that front end needs to be pulled out by a frame puller. labor's a biotch

  20. #20
    Certified Gearhead
    Join Date
    Feb 2006
    Age
    44
    Posts
    279
    Rep Power
    0

    Default

    bump for new price, want it gone by friday if possible thanks yall

  21. #21
    magical negro/photog .blank cd's Avatar
    Join Date
    Jan 2006
    Location
    Kennesaw, GA
    Posts
    12,103
    Rep Power
    39

    Default

    u put a new core support back on and see if everything lines up buddy

    NIKON Squad member 01

    I HAVE SUBS AND CAMERAS AND LENSES FO SALE
    OF*C
    OEMFitment Crew Memeber 01

  22. #22
    Certified Gearhead
    Join Date
    Feb 2006
    Age
    44
    Posts
    279
    Rep Power
    0

    Default

    damn, I wish people would read before blah,blahin. I am selling the car because I work 60-70 hrs. a week and don't have the time to fix it, cause if I did I wouldn't be selling it on here. Not worth my time and I am not going to pay anybody my money to do such an easy task. I just don't have time to fix it so I gotta cut my losses and I know the frame is fine because I am the repair shop manager over at Nalley Acura and thats what I do for a living and have been for 6 yrs. man. I have a wife and kids at home that are more important to spend time w/ then stay up at the shop after hrs and be away from them more than I already am, simple as that, it's gotta go.
    Quote Originally Posted by blank cd
    u put a new core support back on and see if everything lines up buddy
    Last edited by smokinbud247; 02-01-2007 at 12:35 AM.

  23. #23
    more wood than noahs arc sirkus's Avatar
    Join Date
    Mar 2005
    Location
    Cartersville, Ga
    Age
    41
    Posts
    1,816
    Rep Power
    23

    Default

    I feel your pain... I had a fc that I hit a van with and destroyed the core.. had to cut it off, and then weld the new one on.. Took a good while.. Parts lined up though, as long as nothing was bent before the core... all I had to do was drill the current spot welds out and then weld the new one on... it fit like a charm. This isn't that bad of a deal really if you like to spend time working on cars.
    2014 | Hyundai Veloster | Turbo R-Spec

  24. #24
    Certified Gearhead
    Join Date
    Feb 2006
    Age
    44
    Posts
    279
    Rep Power
    0

    Default

    thanks for the props man, it really is a good deal for a true honda fanatic that can turn a wrench and is a really easy job to do. Just to give yall an idea on what it would cost at "Nalley Acura" where I work we wrote up an estimate on the repair for this car with paint,parts and labor was $1,197.98 and thats what an everyday joe shmo would pay. So I am asking $1,800 for the car and lets round that up to $1,200 you are looking at $3,000 total for the car that has clean title,A/C, and great interior and 116,000 miles and runs like a champ.

  25. #25
    Certified Gearhead
    Join Date
    Feb 2006
    Age
    44
    Posts
    279
    Rep Power
    0

    Default

    I talk to steve over at hmotorsonline yesterday and a whole front jdm eg clip, which comes with core support,2 fenders,2 corner lights,2 headlights,hood and bumper cover shipped to your door for $750 any day of the week and you can pick your color out you need all ready painted. Just another option for you guys

  26. #26
    Banned
    Join Date
    Jan 2007
    Age
    40
    Posts
    187
    Rep Power
    0

    Default

    aye aye it had ac n it had nice interior but we kept it n put that tanshit in there n it wasnt wrecked like sumones ahem dat car wasnt no fashion statement it was arunnin ride for sumone who wantedto start frum scratch but urs is a project in need imma need a whole certifit front end n replace that front clip n weld a new one that a shop will have to do well i gots a stack if u in need for money i got chu u can have the motor if u want non vtec shit lol tryin to race hea not save gas so wussup keep the wholeeeeeee swap i give u a stack i take it out for u if u want. hit me up

  27. #27
    Certified Gearhead
    Join Date
    Dec 2006
    Age
    45
    Posts
    328
    Rep Power
    19

    Default

    Man please hold this car till next friday, I really want to get it lmk if you can.

  28. #28
    Banned
    Join Date
    Jan 2007
    Age
    40
    Posts
    187
    Rep Power
    0

    Default

    das kool any stock color or any color...?

  29. #29
    Certified Gearhead
    Join Date
    Feb 2006
    Age
    44
    Posts
    279
    Rep Power
    0

    Default

    Sorry man I want it gone by this friday

  30. #30
    Certified Gearhead
    Join Date
    Feb 2006
    Age
    44
    Posts
    279
    Rep Power
    0

    Default

    bump for a great fuckin deal,come and get the car gotta be done by friday

  31. #31
    Certified Gearhead
    Join Date
    Dec 2006
    Age
    45
    Posts
    328
    Rep Power
    19

    Default

    i cant believe nobody has snatched this up yet

  32. #32
    Certified Gearhead
    Join Date
    Feb 2006
    Age
    44
    Posts
    279
    Rep Power
    0

    Default

    ttt,change of price.

  33. #33
    Vtecing is my HOBBY!!!
    Join Date
    Apr 2006
    Location
    Honda dealer
    Age
    37
    Posts
    1,301
    Rep Power
    21

    Default

    500 ill get it today!!

  34. #34
    Certified Gearhead
    Join Date
    Feb 2006
    Age
    44
    Posts
    279
    Rep Power
    0

    Default

    come and get it!

  35. #35
    superduper LLLLLLLLL
    Join Date
    May 2003
    Location
    Gwinnett
    Posts
    5,599
    Rep Power
    28

    Default

    dangg!! this price has come a LONG way...

    bump for you

  36. #36
    Senior Member mccoy1178's Avatar
    Join Date
    Mar 2005
    Age
    47
    Posts
    2,725
    Rep Power
    23

    Default

    yo, u got pm!!
    Mccoy

  37. #37
    Certified Gearhead
    Join Date
    Feb 2006
    Age
    44
    Posts
    279
    Rep Power
    0

    Default

    Got it.

  38. #38
    Certified Gearhead
    Join Date
    Feb 2006
    Age
    44
    Posts
    279
    Rep Power
    0

    Default

    bump, for new final price

  39. #39
    Certified Gearhead
    Join Date
    Feb 2006
    Age
    44
    Posts
    279
    Rep Power
    0

    Default

    And lower it goes.

  40. #40
    Certified Gearhead
    Join Date
    Feb 2006
    Age
    44
    Posts
    279
    Rep Power
    0

    Default

    bump

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!