Results 1 to 25 of 25

Thread: FS/FT AE86 GT-S

  1. 09-14-2008, 07:21 AM #1
    AZN_Pride
    AZN_Pride is offline
    2SL0W4U AZN_Pride's Avatar
    Join Date
    Oct 2006
    Location
    Dothan, AL
    Age
    36
    Posts
    1,080
    Rep Power
    19

    Default FS/FT AE86 GT-S

    Make: Toyota
    Model: Corolla GT-S
    Year: 1985
    Transmission: 5Spd
    Engine:4AGE 1.6Ltr DOHC
    Miles:273,XXX on the Odometer, Unknown on the new engine.

    Location:     Memphis Tn

    Contact: PM
    Price: 2,000 OBO, ALL TRADES CONSIDERED

    Reason for selling: I am moving.

    Good: Really clean body over all. Includes a ton of new parts and extra 4AGE blocks. Many Brand new parts on the car from Toyota.

    Bad: Driver side fender is dented. The engine like to try and run but will not idle. I do not have the title. Long story.

    Video:


    Pics:

    Last edited by AZN_Pride; 09-14-2008 at 12:14 PM.
    (919): so I was just driving high and I stopped to let a pinecone cross the road because I thought it was a hedgehog.
    Reply With Quote Reply With Quote
  2. 09-14-2008, 12:57 PM #2
    benisatool
    benisatool is offline
    IA Member
    Join Date
    May 2008
    Age
    36
    Posts
    13
    Rep Power
    0

    Default

    Don't forget that the rear end needs a rebuild

    Proof: http://www.tennspeed.net/forum/about11347-0-asc-80.html
    Read the post there by SilviaSprung
    Last edited by benisatool; 09-14-2008 at 01:26 PM.
    Reply With Quote Reply With Quote
  3. 09-14-2008, 02:24 PM #3
    AZN_Pride
    AZN_Pride is offline
    2SL0W4U AZN_Pride's Avatar
    Join Date
    Oct 2006
    Location
    Dothan, AL
    Age
    36
    Posts
    1,080
    Rep Power
    19

    Default

    Quote Originally Posted by benisatool
    Don't forget that the rear end needs a rebuild

    Proof: http://www.tennspeed.net/forum/about11347-0-asc-80.html
    Read the post there by SilviaSprung
    Brent said that on the drive from Austin, that the rear clunked a little. Which either means is the ring and pinion or the sub-frame.
    (919): so I was just driving high and I stopped to let a pinecone cross the road because I thought it was a hedgehog.
    Reply With Quote Reply With Quote
  4. 09-14-2008, 06:40 PM #4
    jadakid88
    jadakid88 is offline
    BKNY all day jadakid88's Avatar
    Join Date
    May 2006
    Location
    Brooklyn, New York, United States
    Posts
    6,291
    Rep Power
    27

    Default

    damn you must have a personal vendetta
    Quote Originally Posted by benisatool
    Don't forget that the rear end needs a rebuild

    Proof: http://www.tennspeed.net/forum/about11347-0-asc-80.html
    Read the post there by SilviaSprung
    ATL DA SQUAD MEMBER #1


    HONDA_PARTS_CLEANUP_CLICK_ME
    Reply With Quote Reply With Quote
  5. 09-14-2008, 06:40 PM #5
    jadakid88
    jadakid88 is offline
    BKNY all day jadakid88's Avatar
    Join Date
    May 2006
    Location
    Brooklyn, New York, United States
    Posts
    6,291
    Rep Power
    27

    Default

    damn you must have a personal vendetta...
    Quote Originally Posted by benisatool
    Don't forget that the rear end needs a rebuild

    Proof: http://www.tennspeed.net/forum/about11347-0-asc-80.html
    Read the post there by SilviaSprung
    ATL DA SQUAD MEMBER #1


    HONDA_PARTS_CLEANUP_CLICK_ME
    Reply With Quote Reply With Quote
  6. 09-14-2008, 06:52 PM #6
    AZN_Pride
    AZN_Pride is offline
    2SL0W4U AZN_Pride's Avatar
    Join Date
    Oct 2006
    Location
    Dothan, AL
    Age
    36
    Posts
    1,080
    Rep Power
    19

    Default

    Quote Originally Posted by jadakid88
    damn you must have a personal vendetta...
    He must have. Mac follows me on every forum. Its kinda creepy. LOL
    (919): so I was just driving high and I stopped to let a pinecone cross the road because I thought it was a hedgehog.
    Reply With Quote Reply With Quote
  7. 09-14-2008, 06:59 PM #7
    FasTech
    FasTech is offline
    I♥mydick ٩(-̮̮̃•̃)۶ FasTech's Avatar
    Join Date
    Mar 2008
    Location
    Middle, Ga
    Age
    35
    Posts
    12,577
    Rep Power
    35

    Default

    Wish I had the $$$! I've always wanted a AE86.... G/L on sale bro
    "Damn, Its Tyler"
    RaceReadyDevelopments
    Reply With Quote Reply With Quote
  8. 09-14-2008, 09:15 PM #8
    wanggsticky
    wanggsticky is offline
    Wake,Bake,Cake Up wanggsticky's Avatar
    Join Date
    Jan 2008
    Location
    The Slums of GA
    Posts
    1,618
    Rep Power
    18

    Default

    siccckkkk...has potential
    Reply With Quote Reply With Quote
  9. 09-14-2008, 09:50 PM #9
    benisatool
    benisatool is offline
    IA Member
    Join Date
    May 2008
    Age
    36
    Posts
    13
    Rep Power
    0

    Default

    Quote Originally Posted by jadakid88
    damn you must have a personal vendetta...
    Just trying to keep the crooks at bay
    Reply With Quote Reply With Quote
  10. 09-14-2008, 10:17 PM #10
    AZN_Pride
    AZN_Pride is offline
    2SL0W4U AZN_Pride's Avatar
    Join Date
    Oct 2006
    Location
    Dothan, AL
    Age
    36
    Posts
    1,080
    Rep Power
    19

    Default

    Quote Originally Posted by wanggsticky
    siccckkkk...has potential
    Thanks. I will probably be getting an 85 GT-S Engine harness soon.
    (919): so I was just driving high and I stopped to let a pinecone cross the road because I thought it was a hedgehog.
    Reply With Quote Reply With Quote
  11. 09-15-2008, 01:09 PM #11
    benisatool
    benisatool is offline
    IA Member
    Join Date
    May 2008
    Age
    36
    Posts
    13
    Rep Power
    0

    Default

    Quote Originally Posted by AZN_Pride
    Brent said that on the drive from Austin, that the rear clunked a little. Which either means is the ring and pinion or the sub-frame.
    You're going to lie right after a posted a link in which one of the previous owners said it needed a rebuild?

    Do you even know what the ring and pinion is? It could be the subframe? What the hell is that supposed to mean?
    Reply With Quote Reply With Quote
  12. 09-15-2008, 01:20 PM #12
    AZN_Pride
    AZN_Pride is offline
    2SL0W4U AZN_Pride's Avatar
    Join Date
    Oct 2006
    Location
    Dothan, AL
    Age
    36
    Posts
    1,080
    Rep Power
    19

    Default

    Quote Originally Posted by benisatool
    You're going to lie right after a posted a link in which one of the previous owners said it needed a rebuild?

    Do you even know what the ring and pinion is? It could be the subframe? What the hell is that supposed to mean?
    thats not the owner mac. owner is dead. thas a buddy of his who took the car after he died. ask the man himself.

    im talking about he ring and pinion in the lsd and not the rack and pinion for the steering.
    (919): so I was just driving high and I stopped to let a pinecone cross the road because I thought it was a hedgehog.
    Reply With Quote Reply With Quote
  13. 09-15-2008, 04:13 PM #13
    benisatool
    benisatool is offline
    IA Member
    Join Date
    May 2008
    Age
    36
    Posts
    13
    Rep Power
    0

    Default

    I can't believe that you still don't know your terminology even though you've been "into" cars for so long.

    I know that you're talking about the rear diff.

    The pinion is inside the diff housing and it spins the ring gear that is bolted to the LSD. The axles are in the LSD which is inside the housing. The rear differential is the whole thing, the LSD is the actual differential inside the housing. They aren't the same.

    I believe it's a clutch type LSD, and with those miles it probably needs a rebuild. Even if it's just the ring and pinion, it's probably going to be a $500 replacement for parts and labor.
    Reply With Quote Reply With Quote
  14. 09-15-2008, 04:58 PM #14
    AZN_Pride
    AZN_Pride is offline
    2SL0W4U AZN_Pride's Avatar
    Join Date
    Oct 2006
    Location
    Dothan, AL
    Age
    36
    Posts
    1,080
    Rep Power
    19

    Default

    it is the clutch type. a rebuild kit from t3 is 150 but idont know how much labor is on it.

    sale pending
    (919): so I was just driving high and I stopped to let a pinecone cross the road because I thought it was a hedgehog.
    Reply With Quote Reply With Quote
  15. 09-28-2008, 09:05 PM #15
    AZN_Pride
    AZN_Pride is offline
    2SL0W4U AZN_Pride's Avatar
    Join Date
    Oct 2006
    Location
    Dothan, AL
    Age
    36
    Posts
    1,080
    Rep Power
    19

    Default

    1700!!!!!!!!!!!!!
    (919): so I was just driving high and I stopped to let a pinecone cross the road because I thought it was a hedgehog.
    Reply With Quote Reply With Quote
  16. 09-28-2008, 09:13 PM #16
    Code-Aye
    Code-Aye is offline
    Senior Member Code-Aye's Avatar
    Join Date
    Jan 2008
    Location
    hahaha
    Age
    34
    Posts
    1,157
    Rep Power
    19

    Default

    any trades for the four door in my sig?
    pm'd
    Reply With Quote Reply With Quote
  17. 09-28-2008, 10:10 PM #17
    AZN_Pride
    AZN_Pride is offline
    2SL0W4U AZN_Pride's Avatar
    Join Date
    Oct 2006
    Location
    Dothan, AL
    Age
    36
    Posts
    1,080
    Rep Power
    19

    Default

    Yea. I returned your PM
    (919): so I was just driving high and I stopped to let a pinecone cross the road because I thought it was a hedgehog.
    Reply With Quote Reply With Quote
  18. 09-30-2008, 09:29 AM #18
    AZN_Pride
    AZN_Pride is offline
    2SL0W4U AZN_Pride's Avatar
    Join Date
    Oct 2006
    Location
    Dothan, AL
    Age
    36
    Posts
    1,080
    Rep Power
    19

    Default

    still for sale!
    (919): so I was just driving high and I stopped to let a pinecone cross the road because I thought it was a hedgehog.
    Reply With Quote Reply With Quote
  19. 10-01-2008, 01:40 PM #19
    AZN_Pride
    AZN_Pride is offline
    2SL0W4U AZN_Pride's Avatar
    Join Date
    Oct 2006
    Location
    Dothan, AL
    Age
    36
    Posts
    1,080
    Rep Power
    19

    Default

    bump. i need money due to moving so taking best offer
    (919): so I was just driving high and I stopped to let a pinecone cross the road because I thought it was a hedgehog.
    Reply With Quote Reply With Quote
  20. 10-02-2008, 01:37 PM #20
    Me86Rob
    Me86Rob is offline
    HEY EVERYBODY! Me86Rob's Avatar
    Join Date
    May 2008
    Location
    Stone Mountain
    Age
    35
    Posts
    5,965
    Rep Power
    29

    Default

    sorry bro, but your and idiot. its missing like hell, and WTF?! you dont get in a car and rev it cold. thats just dumb. anyway, it looks clean and gl with sale. im sure some inital D tard will buy it
    Reply With Quote Reply With Quote
  21. 10-02-2008, 07:45 PM #21
    AZN_Pride
    AZN_Pride is offline
    2SL0W4U AZN_Pride's Avatar
    Join Date
    Oct 2006
    Location
    Dothan, AL
    Age
    36
    Posts
    1,080
    Rep Power
    19

    Default

    How can it be missing when the timing is fine? There are two wires coming from the MAF sensor that have been cut off and I dont know where they go since I bought the car as a shell.

    I know you don't rev it on a cold engine that's why I ran it a few times before without reving.

    Also car is SOLD
    (919): so I was just driving high and I stopped to let a pinecone cross the road because I thought it was a hedgehog.
    Reply With Quote Reply With Quote
  22. 10-02-2008, 09:51 PM #22
    Me86Rob
    Me86Rob is offline
    HEY EVERYBODY! Me86Rob's Avatar
    Join Date
    May 2008
    Location
    Stone Mountain
    Age
    35
    Posts
    5,965
    Rep Power
    29

    Default

    if you ran it, then how come it hard a hard time starting up? shouldnt have that problem if it were warm. and you could be missing because of several things. plug bad, plug wire bad, and thats just the start
    Reply With Quote Reply With Quote
  23. 10-02-2008, 11:59 PM #23
    AZN_Pride
    AZN_Pride is offline
    2SL0W4U AZN_Pride's Avatar
    Join Date
    Oct 2006
    Location
    Dothan, AL
    Age
    36
    Posts
    1,080
    Rep Power
    19

    Default

    Quote Originally Posted by LexiZ31
    if you ran it, then how come it hard a hard time starting up? shouldnt have that problem if it were warm. and you could be missing because of several things. plug bad, plug wire bad, and thats just the start
    Like I said before, the maf is not working. Also all the plugs were getting spark and proper voltage. With the Rolla the right amount of fuel wont be injected if the MAF sensor is not working therefore the cylinders have a harder time firing so to speak.
    (919): so I was just driving high and I stopped to let a pinecone cross the road because I thought it was a hedgehog.
    Reply With Quote Reply With Quote
  24. 10-03-2008, 05:04 PM #24
    benisatool
    benisatool is offline
    IA Member
    Join Date
    May 2008
    Age
    36
    Posts
    13
    Rep Power
    0

    Default

    AZN_Pride is a ****ing tool. He doesn't know the difference between a spark plug and a **** in his ass. He already zapped the wiring harness when he connected a ground to a positive terminal.

    The reason why he is selling it is because he can't fix it and none of his jerkoff buddies will hold his hand to fix it.

    He also did not warm the engine before revving it. He also ran the engine with no exhaust manifold, I'm sure the valves loved that.

    Ben you're ****ing tool that will never amount to anything. Save us all some trouble and jump in front of moving bus.
    Reply With Quote Reply With Quote
  25. 10-03-2008, 07:54 PM #25
    benisatool
    benisatool is offline
    IA Member
    Join Date
    May 2008
    Age
    36
    Posts
    13
    Rep Power
    0

    Default

    Ben, you're a bi*** and you know it. Suck a n**** d***, b****


    The bus is waiting for you
    Reply With Quote Reply With Quote
« 1990 Toyota Supra Turbo | 2005 Tacoma X-Runner »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!