Results 1 to 23 of 23

Thread: Good runs against Slowhawk and Lankhoss

Hybrid View

  1. #1
    Slowest LT1 on IA
    Join Date
    Dec 2002
    Location
    Peachtree City, GA
    Posts
    907
    Rep Power
    23

    Default Good runs against Slowhawk and Lankhoss

    It was nice to finally meet you guys. My girlfriend and i had an awsome time racing with you. WE had a BLAST until one of my intake pipes decided it had enough of abuse and poped off so we had to end it early

    Overall it was a perfect night, very fast cars blasting up and down a empty road No BS just lots of good clean racing Cant wait to do it next weekend. Hopefully all three of us will have our "problems" worked out
    Last edited by LT1UltraZ; 10-22-2006 at 11:36 AM.

  2. #2
    Life begins @1200psi b0ki's Avatar
    Join Date
    Jul 2005
    Location
    garage.....
    Age
    41
    Posts
    985
    Rep Power
    21

    Default

    Damm..... so when we left the parking lot u guys went diff way ? Cuz we went .....
    Last edited by ct9a gsr; 10-22-2006 at 12:36 PM.
    2 buses in front of u...... UNTOUCHABLE

  3. #3
    2.3 Evo 8
    Guest

    Default

    Quote Originally Posted by b0ki
    Damm..... so when we left the parking lot u guys went diff way ? Cuz we went .....
    Boris, edit your post man. No road names please.
    Last edited by ct9a gsr; 10-22-2006 at 12:37 PM.

  4. #4
    Senior Member
    Join Date
    Mar 2006
    Location
    Loganville
    Age
    47
    Posts
    2,042
    Rep Power
    23

    Default

    Hey LTI, I'd be happy to line them up again. We had a good little sprint there, but I'd like a tad more room next time. We were about dead even, so it should be a nice matchup.

    Did you ever figure out what was going on with your boost gauge?

  5. #5
    Slowest LT1 on IA
    Join Date
    Dec 2002
    Location
    Peachtree City, GA
    Posts
    907
    Rep Power
    23

    Default

    Quote Originally Posted by Lankhoss
    Hey LTI, I'd be happy to line them up again. We had a good little sprint there, but I'd like a tad more room next time. We were about dead even, so it should be a nice matchup.

    Did you ever figure out what was going on with your boost gauge?
    blew my blower pipe off :boobies:

  6. #6
    Slowest LT1 on IA
    Join Date
    Dec 2002
    Location
    Peachtree City, GA
    Posts
    907
    Rep Power
    23

    Default

    Quote Originally Posted by Lankhoss
    Hey LTI, I'd be happy to line them up again. We had a good little sprint there, but I'd like a tad more room next time. We were about dead even, so it should be a nice matchup.

    Did you ever figure out what was going on with your boost gauge?
    blew a nice hole in a rubber elbow coming of the blower. I guess those rubber elbows from lowes arent meant for lots of heat and PSI

  7. #7
    Senior Member
    Join Date
    Mar 2006
    Location
    Loganville
    Age
    47
    Posts
    2,042
    Rep Power
    23

    Default

    Quote Originally Posted by LT1UltraZ
    blew a nice hole in a rubber elbow coming of the blower. I guess those rubber elbows from lowes arent meant for lots of heat and PSI
    Wow, I can't believe none of us saw that last night!!

    At least it's a quick and easy fix!

  8. #8
    <-- Ohhh! (my boy) FAHHQUE700's Avatar
    Join Date
    Jun 2006
    Location
    Down in A-Town
    Age
    51
    Posts
    919
    Rep Power
    20

    Default

    buy some T-bolt clamps... Summit has them.

  9. #9
    Senior Member lightspeed's Avatar
    Join Date
    Sep 2005
    Location
    atlanta
    Posts
    1,970
    Rep Power
    22

    Default

    can I get in on this next weekend? ive never run a new z06. and i need a rematch with ultraz.
    how did you do with slowhawk?

  10. #10
    Senior Member
    Join Date
    Mar 2006
    Location
    Loganville
    Age
    47
    Posts
    2,042
    Rep Power
    23

    Default

    Quote Originally Posted by lightspeed
    can I get in on this next weekend? ive never run a new z06. and i need a rematch with ultraz.
    how did you do with slowhawk?
    I'm not coming out next weekend, I already have plans. Not sure when I'll be up there again, actually. Seems I've got something going on every weekend up until Thanksgiving...then I'm going back home (TN) for that.

    I am not really that serious about racing, so I rarely (if ever) actually setup races. But I'll show up at these spots from time to time, and some people will approach me to see if I wanna run. That's just kinda how it works for me.

    So the quick answer is....if you see me out, just come up and ask me. More than likely I'll be up for it

  11. #11
    IA.com BS DETECTOR
    Join Date
    Nov 2002
    Location
    few miles past loganville,GA
    Age
    51
    Posts
    1,826
    Rep Power
    24

    Default

    Quote Originally Posted by lightspeed
    can I get in on this next weekend? ive never run a new z06. and i need a rematch with ultraz.
    how did you do with slowhawk?
    with what car? I wanna run the supra! I'll probably retune my car this week for 14-15 psi with some 100 octane and bring out some sticky tires! My nitto 17 inch drag radials just don't cut it even running just 7 psi

  12. #12
    Senior Member lightspeed's Avatar
    Join Date
    Sep 2005
    Location
    atlanta
    Posts
    1,970
    Rep Power
    22

    Default

    Quote Originally Posted by WINDSOR
    with what car? I wanna run the supra! I'll probably retune my car this week for 14-15 psi with some 100 octane and bring out some sticky tires! My nitto 17 inch drag radials just don't cut it even running just 7 psi
    Bring it on You realize we'll have to run race gas to race gas then.

  13. #13
    Senior Member lightspeed's Avatar
    Join Date
    Sep 2005
    Location
    atlanta
    Posts
    1,970
    Rep Power
    22

    Default

    Oh, LT1...you didnt give the result with slowhawk... what was it?

  14. #14
    slower than you Incontt's Avatar
    Join Date
    Jul 2005
    Location
    Mableton, Ga
    Age
    56
    Posts
    1,067
    Rep Power
    22

    Default

    i heard he beat slowhawk by half car...take that as hearsay...i wasnt there


    slower than you

  15. #15
    <-- Ohhh! (my boy) FAHHQUE700's Avatar
    Join Date
    Jun 2006
    Location
    Down in A-Town
    Age
    51
    Posts
    919
    Rep Power
    20

    Default

    I heard slowhawk beat him by a pencil.

  16. #16

    Default

    A #2 pencil?
    Quote Originally Posted by FAHHQUE700
    I heard slowhawk beat him by a pencil.

  17. #17
    <-- Ohhh! (my boy) FAHHQUE700's Avatar
    Join Date
    Jun 2006
    Location
    Down in A-Town
    Age
    51
    Posts
    919
    Rep Power
    20

    Default

    Quote Originally Posted by jtownaccord
    A #2 pencil?
    No a mechanical one, with a worn down eraser.

  18. #18

    Default

    Quote Originally Posted by FAHHQUE700
    No a mechanical one, with a worn down eraser.
    Daamnn!! That shit is fast

  19. #19
    Senior Member
    Join Date
    Mar 2006
    Location
    Loganville
    Age
    47
    Posts
    2,042
    Rep Power
    23

    Default

    I'll vouch for the LT1's!! Although the LS1's put out more power, I owned a few L-98 motors, and always prefered the drive of those and the LT1's over the LS1's. I think the LTx engines had better low end torque, too, if I'm not mistaken.

  20. #20
    IA Member
    Join Date
    Sep 2006
    Age
    43
    Posts
    67
    Rep Power
    20

    Default

    Funny 1/8th mile times slowhawk.. my 2000 z28 went 8.506 @ 87 with a lid, cutout, and ls6 intake.. 21mph less.. lol. Talk about no traction.

    Good races, would have like to seen them in person.

    Later,
    Josh

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!