Me - boosted GSR
Friend - Borla exhaust and intake
From a 40 roll
Enjoy!!
93 Honda GSR eg Turbo vs. 2001 Chevrolet Corvette Convertible LS1 - YouTube
Me - boosted GSR
Friend - Borla exhaust and intake
From a 40 roll
Enjoy!!
93 Honda GSR eg Turbo vs. 2001 Chevrolet Corvette Convertible LS1 - YouTube
I used to kill stock c5's with my stock b series in a hatch. So, i kind of expected a boosted swap to win..
They run mid 13's stock, z06 mid 12's in that year, find a zo6, be much closer run!
I've been trying to find stuff on the hwy to run. No one usually messes around with me. I guess I'll have to go into ricer mode to instigate some runs lol
I'll run you this weekend if I can get my (automotive) rear end back together.
1993 240SX single cam
Walked him pretty bad
2013 GT500
1989 Mustang 5.0
Sounds good will!!
Bobby I need some dr or slicks for the track. Just don't have the funds at the moment for them. Street tires would be pointless.
Wanna run a newer one ?
also I think he was an auto is that right ?
Im down : - )
Lol vett got destroyed. I want to run the civic (=
Sent from my myTouch_4G_Slide using Tapatalk 2
<3 Catnipples
Built gsr or stock gsr?
Rod and piston block with a stock head.
Lol I'll be at import showdown if any out-of-towners want to run. If I have some slicks that is.
Car looks super slow brooks no match for a sr20 hatch with stock internals
1990 Mustang Coupe...turbo lq4 through the glide
What does it being fs have anything to do with running my car on the high way. I dont have to re tune if I don't want. I only changed the intake mani. It's not setup to drag, but from a 40 roll ill drag this honda all the way down 85.
Sent from my myTouch_4G_Slide using Tapatalk 2
<3 Catnipples
Stock internals are forged last time I checked. Obviously strong enough to hold up on 360whp. A gsr deff couldn't make that kind of power (reliably) on a stock bottom end. I drive a coupe not a hatch, so you were kind of close.
Sent from my myTouch_4G_Slide using Tapatalk 2
<3 Catnipples
I would like to know where you saw that the stock bottom end was forged. The word cast does not equal forged, so maybe you should read a little more often. The stock bottom will hold 360, with a good tune, which isn't possible with an afc.
Btw, car looks good Brooks. Hopefully I can get mine back up soon and we can have a little fun.
Lol my car is perfect with just safc and very reliable. What I meant was, stock internals of a sr are totally different then that of a gsr. I just rebuilt the motor, I'm sure ill be ok guy. Thanks for your concerns. Now if I was venturing past 450whp sure I'd build the bottom end. I've taken care of the srs main weak points. Hg, head studs, race bearings, s14 oil pick up, oil pump, rocker arm stoppers. I had it tuned by sammy so I'm sure its safe since ive never seen a car tuned by him blow up (bc of said tune).
Sent from my myTouch_4G_Slide using Tapatalk 2
<3 Catnipples
So it went from "they're forged" to me and after someone comes in here that actually knows what they are talking about to "what I meant was they are different than a gsr".....sounds like you know what you're talking about for sure man...and 360 hp how cute lol
1990 Mustang Coupe...turbo lq4 through the glide
I guess what you really meant was, that you have no idea what you mean. And yeah, I'm sure your work will speak for itself. Are you sure that you had it tuned by Sammy or did the previous owner? From your build thread "Specs: unknown was told it made 346whp at 19psi but can't be certain since the previous owner fibs." And about the AFC, did he adjust your timing or just the fuel?
He did I've spoken to him many times. He adjusted timing as well as fuel. The iacv was bad when I first got it other then that it was perfect. I'm still having it re tuned for piece of mind. Better safe then sorry. I'm cranking the boost up and getting power fc.
Sent from my myTouch_4G_Slide using Tapatalk 2
<3 Catnipples
Ever hear of a timing light? Lol I mean he did adjust the timing, but not as great as you would with a standalone of course. I know what a piggy back can and cant do.
I have a black top. I think the pfc for the black top was a little different, am I correct?
Sent from my myTouch_4G_Slide using Tapatalk 2
<3 Catnipples
Should have been more specific and said ignition timing, which is just as, if not more, important as the fuel map. And from what I have seen, as long as the blacktop isn't a type x, from 96-98, then they are interchangeable. But it might require repinning or switching a couple wires.
I heard it was nicer when you got it...and i didnt stereotype you, you said you drifted not me....
1990 Mustang Coupe...turbo lq4 through the glide
Nicer? Pig nose is now wide body aero silvia front end, hacked wiring is now re done and shrink wrapped, motor fully rebuilt, engine bay painted, roll cage, new suspension ect ect. I don't know who told you that but their wrong. The car is 40x better then it was.
from this^
To this^
Sent from my myTouch_4G_Slide using Tapatalk 2
<3 Catnipples
It looks like you used aluminum foil to heat wrap your ic piping and can you define "roll cage" did you build it? Will it pass tech at any real event?
1990 Mustang Coupe...turbo lq4 through the glide