I have a new tune and 12 lbs, would like to see where I stand.
Anyone willing to run after the Rside meet?
I have a new tune and 12 lbs, would like to see where I stand.
Anyone willing to run after the Rside meet?
Its slow... I promise
Are you the one that ran Stone?
2006 Corvette Z06
2" Stainless Works LT Headers
Random Technologies 3" X-pipe, with high flow polished cats
Callaway "Honker" cold air intake
Ported throttle body and intake
Custom dyno tune by MTI Racing Atlanta
496rwhp/478tq
I wanna video tape
Is yours slower or faster?
2006 Corvette Z06
2" Stainless Works LT Headers
Random Technologies 3" X-pipe, with high flow polished cats
Callaway "Honker" cold air intake
Ported throttle body and intake
Custom dyno tune by MTI Racing Atlanta
496rwhp/478tq
Should be faster.
If your sig numbers are correct and this MBC will work with me tomorrow, it might be a fun pull.
If your numbers are low or my MBC acts up again, I'll get drug.
Its slow... I promise
Hmmmm - should be a good thread by 2morrow afternoon
"I'm not a gynecologist... but I'll take a look."
Hope so. I really would like to see where my car is at and I can't think of any better way to do such than some friendly pulls against some cars with power.
If I get drug, I get drug. Just means that I have a little more work to do.
If I hang or pull, then I hang or pull. And still means I have a little more work to do.
Perhaps, if the weather looks better for this weekend, I'll head out to the MCE event and see what I can do on street tires.
Its slow... I promise
Check my sig, still interested?
what round about numbers u putting down?????
-If You Own A Honda And Say "Headers", Go Jump Off Bridge...........
Funny how all the usual smacktalkers won't just say "sure, bring it" - they are passive and asking a buncha questions. Innnnnnnteresting. I think Rodney's showing has turned the regulars into a fickle crowd.
"I'm not a gynecologist... but I'll take a look."
You saying I'm a smack talker about racing? If that's the case, go ahead and quote where I talk "smack" about racing other people.
I'm asking questions because "IF" I'm going to race, I don't want to waste my time running someone who isn't similar in speed to me......be it slower or faster.
This is a decent thread without all the drama, quit trying to bring some into it.
P.S. I'm not sure if I can make it out tonight or not. I was supposed to be seeing someone tonight, but we haven't setup a specific time or place yet.
2006 Corvette Z06
2" Stainless Works LT Headers
Random Technologies 3" X-pipe, with high flow polished cats
Callaway "Honker" cold air intake
Ported throttle body and intake
Custom dyno tune by MTI Racing Atlanta
496rwhp/478tq
I'm trying to figure out why you think I was talking about you of all people in the KF You're not important enuff to be on my radar - when I've had questions for you I asked you directly do I not? Speaking of drama, your post is the 1st drama-centric post in this thread. Kthanx bye.
"I'm not a gynecologist... but I'll take a look."
2006 Corvette Z06
2" Stainless Works LT Headers
Random Technologies 3" X-pipe, with high flow polished cats
Callaway "Honker" cold air intake
Ported throttle body and intake
Custom dyno tune by MTI Racing Atlanta
496rwhp/478tq
Sooooo don't you think I would have directed post 7 towards you if I meant you?? I've read your analysis of your gear/rev issue and your disposition on street-racing as whole which I said that I respect. So why would I target you? We're good man.
What I mean is - there are LOTS of smacktalkers in here... and I'd expect more of the regulars to chime in. Kool?
"I'm not a gynecologist... but I'll take a look."
I see the smack talkers go back and forth with each other, usually. Btstone is gonna mess with Vteckidd, Icontt, Phil, Hunter, maybe a couple others. Smacked has something to say about almost anyone...and he posted in here already.
Nobody knows this guy, so nobody really has any "beef" with him to talk smack about. If he and I are a good run, that probably means he doesn't have a whole lot of people who are around his speed....because that's the problem I run into. I'm either too fast for lightly modded cars, or way behind the majorly built ones.
2006 Corvette Z06
2" Stainless Works LT Headers
Random Technologies 3" X-pipe, with high flow polished cats
Callaway "Honker" cold air intake
Ported throttle body and intake
Custom dyno tune by MTI Racing Atlanta
496rwhp/478tq
Well, for some reason people think that certain regulars in here just go out of there way to fuck with everyone that posts here....which isn't the case.
If you are cool with people, then they will usually act that way back. The reason there is so much shit talking in this area is because there are a lot of people who disagree or don't like each other.
So when people disagree, that usually means there's two different sides to things. So you have your one group that normally takes one side, and another group that typically takes the other. Then it looks like there are gang wars or something, which really isn't true. It's like Democrats and Republicans.....we're just always gonna disagree heh
2006 Corvette Z06
2" Stainless Works LT Headers
Random Technologies 3" X-pipe, with high flow polished cats
Callaway "Honker" cold air intake
Ported throttle body and intake
Custom dyno tune by MTI Racing Atlanta
496rwhp/478tq
BTW Lank - I never considered you a smacktalker... even though you like to co-sign rediculousness - LOL. But you're still kool IMO w/ what little interaction I have had w/ you.
"I'm not a gynecologist... but I'll take a look."
I think you should act like you know nothing about this site, nor anyone who posts here.......go back and read the first 7 posts objectively, then see if you can figure out why I responded.
I asked two direct questions to the guy wanting to race, and 1 other guy that rarely posts asked what hp he was making. Your comment was that "the smack talkers are asking all these questions"
2006 Corvette Z06
2" Stainless Works LT Headers
Random Technologies 3" X-pipe, with high flow polished cats
Callaway "Honker" cold air intake
Ported throttle body and intake
Custom dyno tune by MTI Racing Atlanta
496rwhp/478tq
^^ I've answered your inquiry. Get over yourself bc every1 else has. You're hardly a "smack talker" on here. I'm sure you agree.
"I'm not a gynecologist... but I'll take a look."
BabyJ, no one cares if you approve of them. Who are the normal smack talkers?
OP, you make a lot more power than me if you can hang with Lankhoss. Run what you brung.
There have been two times I have directly responded to you about something, and both times you played it off like "I didn't do anything Lank, just calm down."
I believe that you probably aren't TRYING to be insulting or accusatory, but the words you use certainly come off that way. You don't seem to like to go back and read what you wrote, and just stick to the "I didn't do anything, we're cool" argument.
Even in this post, you say "get over yourself" then put an icon of guys cheering together with their beers. If you REALLY aren't trying to be manipulative, then you should think more about the words you use before typing them.
2006 Corvette Z06
2" Stainless Works LT Headers
Random Technologies 3" X-pipe, with high flow polished cats
Callaway "Honker" cold air intake
Ported throttle body and intake
Custom dyno tune by MTI Racing Atlanta
496rwhp/478tq
And each time you responded to me you act like I have nothing better than to "tread softly" or give a fuck about if YOU think I am being manipulative. I'm very articulate - and I won't make any1 have to "guess" or piece-together if I am attacking them or trying to stir the pot.
This is the internet, I don't have to "pick" my words carefully... you obv felt guilty or felt that I was referencing you when I wasn't. When I asked you about your gearing I did it DIRECTLY. When I called you a dork for co-signing Stone I did it DIRECTLY. When I asked Stone for a run against my notch I did it DIRECTLY. There is nothing mysterious about me or anything I say or do on here. There is no reason for me to "play off" anything. You asked if I was referring to you - I said no. That was the end of it --- otherwise I would have just mentioned you directly sir.
I totally agree w/ this post. I'm a lurker on SCF and Midwest Street Cars... I know my place and stfu on there as well unless I am being spoken to, which isn't often.
"I'm not a gynecologist... but I'll take a look."
You make 460, Lankhoss sig says 496, I make in the same neighborhood. I wouldn't call that a lot more by any stretch of the imagination. To further that, I'm not positive that he won't drag me down the road.
If it's gotta be run what you brung, instead of street tire to street tire (which we both already have), I would prefer to wait until I've got drag radials.
Its slow... I promise
Well based off power to weight, Lankhoss will drag me down the road from a roll. It usually takes a car like mine 580-600hp to pull Lank. I would race you from a roll if I were to come out of retirement, but that would require some $$$ and betting on roll racing is just plain ricer.
I do have about 200lbs of weight reduction in street trim, about 300lbs in drag trim, but still no where near enough to hang with Lank from a roll. I have a dig car.