How much would an engine swap cost at main stream for a honda civic with a 250hp engine?
How much would an engine swap cost at main stream for a honda civic with a 250hp engine?
LOL
Still here!
I can't wait until they see this LIRL
Still here!
20k
"I remember the first time I had sex – I kept the receipt."
LOL
Still here!
this was copied form vteckidds post in the sponsors section:
Ive been getting a TON of PMs regarding some swaps, figured i post it here for a quick reference. These are easy bolt in swaps, we can do custom swaps or change stuff around , but price will be affected. All My Honda engines come from HMOTORSONLINE.COM. LOWEST MILEAGE AN BEST CONDITION MOTOR YOU WILL FIND. FLAWLESS.
88-91 CRX/CIVIC MPFI
B16 OBD0 Swap $1499
Shipping $225
Avid Racing Engine Mount Kit $250
LAbor $750 (RR ENGINE , Wire VTEC, Knock etc)
Axles $100
Shop Supplies Fee $35 (oil change an Coolant Flush)
TOTAL: $2859
92-95 Honda Civic
B16 OBD1 Swap $2250
Shipping $225
Avid Racing Engine Mount Kitr $250
LAbor $750 (RR ENGINE , Wire VTEC, Knock etc)
Axles $100
Shop Supplies Fee $35 (oil change an Coolant Flush)
TOTAL: $3610
or
B18C1/GSR OBD1 Swap $2749
Shipping $225
Avid Racing Engine Mount Kitr $250
Avid Racing Shift Linkage $90
LAbor $750 (RR ENGINE , Wire VTEC, Knock etc)
Axles $100
Shop Supplies Fee $35 (oil change an Coolant Flush)
Total :$4199
or
K20A2 Swap $4000
Shipping $225
Hasport Motor Mounts $550
Labor $1000
KPRO $1000
Misc $650 (fuel lines, FPR, Cables, Hoses, radiator)
Shop Supply Fee $35
TOTAL: $7460
96-00 Civic or 94-01 Integra
B16 Swap
B16 OBD1 $2250
Shipping $225
Avid Racing Engine Mount Kitr $250
Avid Racing Shift Linkage $90
Boomslang Conversion Harness $90
LAbor $750 (RR ENGINE , Wire VTEC, Knock etc)
99-00 SI Rear Bracekt $30
Axles $100
Shop Supplies Fee $35 (oil change an Coolant Flush)
Total :$3820
B18B Swap
B18B OBD1 $2250
Shipping $225
Avid Racing Engine Mount Kitr $250
Avid Racing Shift Linkage $90
Boomslang Conversion Harness $90
LAbor $750 (RR ENGINE , Wire VTEC, Knock etc)
99-00 SI Rear Bracekt $30
Axles $100
Shop Supplies Fee $35 (oil change an Coolant Flush)
Total :$3820
B20 Longblock Swap
B20 Longblock $649
Shipping $225
Labor $750
Skunk2 Pro Intake Manifold $220
Shop Supply Fee $35
Total: $1879
B18C1/GSR
B18C1/GSR OBD1 Swap $2749
Shipping $225
Avid Racing Engine Mount Kitr $250
Avid Racing Shift Linkage $90
Boomslang Conversion Harness $90
Oem 99-00 SI Rear bracket $30
LAbor $750 (RR ENGINE , Wire VTEC, Knock etc)
Axles $100
Shop Supplies Fee $35 (oil change an Coolant Flush)
Total :$4319
K20A2 Swap $4000
Shipping $225
Hasport Motor Mounts $550
Labor $1000
KPRO $1000
Misc $650 (fuel lines, FPR, Cables, Hoses, radiator)
Shop Supply Fee $35
TOTAL: $7460
90-93 Integra or 94-01 Integra
B20 Longblock Swap
B20 Longblock $649
Shipping $225
Labor $750
Skunk2 Pro Intake Manifold $220
Shop Supply Fee $35
Total: $1879
02+ Civics
K20A2 Swap $4000
Shipping $225
Hasport Motor Mounts $550
Labor $1000
Shop Supply Fee $35
Total $5810
Honda Accords OBD1
H22A 92-95 Swap $1950
Shipping $225
Motor Mounts $150
Labor $800
Shop Supply Fee $35
Total $3160
H22 LONGBLOCK ONLY $1200
Shipping $225
Motor Mounts $150
Labor $800
Shop Supply Fee $35
Total $2410
BUILT TURBO/NA MOTORS
CP Pistons with rings $475
Eagle Rods $300
ACL Race Bearings $100
ARP headstuds $100
Machine work $500 (balance, blueprint, bore, hone, deck,chamfer crank ,hottank)
OEM Parts $350 (headgasket, oil pump, timing belt, water pump, lower gasket kit, valve cover gasket, cams seals)
Engine Assembly $550 (measure bearing clearances, check ring gap, file fit rings, bore runout, piston to wall clearance, rod bolt stretch)
RR Engine $700 (that means you bring me a running car, we yank it out, dissasemble it, then put it back in the car)
Turbo Kit reinstall $350 (that is if your car has a turbo kit on it already)
TOTAL:$3425 drive off
need more info man, WHat year honda civic, what motor do you have.Originally Posted by looking4car
to my knowledge there is no honda motor making 250hp, unless you want an NSX swap :boobies:
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
wxactly..what kinda of car it's going in and which motor it is makes a big difference... and you can not get a accurate price of how much it will be until you post up those facts...
You know better; next time will be a ban.
Let me clairify for him. He is looking at the 96-00 ej6(i think thats the code, not a honda expert) civic and wants to know how much a motor that puts out around 200 hp to the wheels would cost.
i was thinking he would be happy with a b18 + i/h/e.
well you are right about the chassis code..my care is 96-200..EJ6_2...that is my exact not sure about his for mine is a 96 coupe dx lol...and you are gonna have to mod it to get 200 hp to the wheels before you put it in...then you will have to do the simple bolt ons...
You know better; next time will be a ban.