Results 1 to 14 of 14

Thread: For-Sale...Sleeved B16 Block + Crank

  1. 11-13-2006, 02:51 PM #1
    TurboD16
    TurboD16 is offline
    IA Member
    Join Date
    May 2006
    Age
    51
    Posts
    136
    Rep Power
    0

    Default For-Sale...Sleeved B16 Block + Crank

    Ok this is a JDM B16A Block with Dart Open Deck Iron Sleeves.
    The block is in great shape. The MAIN CAPS are in great shape also.
    The crank as you can see from the pic Is In AWSOME Shape too.

    The block will have to be DECKED due to the fact that the sleeves sit higher that the deck of the block, I may be wrong but you can run your hand across the top of the block and feel where the iron sleeves are sitting about 1mm above the stock sleeves.

    Trades..
    Im looking for a turbo D series manifold (no hf crap) + $150

    OR

    $300
    For block & crank
    Attached Thumbnails Attached Thumbnails -sleeved-3-jpg   -sleeved-4-jpg   -sleeved-8-jpg   -sleeved-10-jpg   -sleeved-1-jpg  

  2. 11-13-2006, 05:43 PM #2
    Annihilation
    Annihilation is offline
    I SHift at 10k Annihilation's Avatar
    Join Date
    Oct 2003
    Location
    30047-REDLINE, WAT REDLINE? 10k Shifts ALL day
    Age
    41
    Posts
    3,846
    Rep Power
    26

    Exclamation

    THATS A STOCK BLOCK


    ok i want to know who sells these STOCK blocks to these NOOBS and then tells them they are darton sleeves............
  3. 11-13-2006, 06:23 PM #3
    Blackknightg
    Blackknightg is offline
    Certified Gearhead
    Join Date
    Nov 2005
    Age
    44
    Posts
    328
    Rep Power
    21

    Default

    300 for sleeved block......that's kinda fishy since it costs 900+ for sleeves.
  4. 11-13-2006, 06:58 PM #4
    TurboD16
    TurboD16 is offline
    IA Member
    Join Date
    May 2006
    Age
    51
    Posts
    136
    Rep Power
    0

    Default

    Well its funny that I have never seen a b16 with IRON sleeves.
    Oh and Automotive Precision Machinery told me they were,
    and for your Info I make METH not motors...NOOB,...lol thats funny

    Oh and I dont care if a sleeved block cost $1000, I dont have any $ IN THE BLOCK, so I dont care if I get $100 for it.....
    Attached Thumbnails Attached Thumbnails -products_for_poster-jpg   -denver081505fig1-jpg  
    Last edited by TurboD16; 11-13-2006 at 07:05 PM.
  5. 11-13-2006, 07:06 PM #5
    Annihilation
    Annihilation is offline
    I SHift at 10k Annihilation's Avatar
    Join Date
    Oct 2003
    Location
    30047-REDLINE, WAT REDLINE? 10k Shifts ALL day
    Age
    41
    Posts
    3,846
    Rep Power
    26

    Default

    Quote Originally Posted by TurboD16
    Well its funny that I have never seen a b16 with IRON sleeves.
    Oh and Automotive Precision Machinery told me they were,
    and for your Info I make METH not motors...NOOB,...lol thats funny

    Oh and I dont care if a sleeved block cost $1000, I dont have any $ IN THE BLOCK, so I dont care if I get $100 for it.....

    Just to let u know that jus cuz its iron doesnt make it a DARTON SLEEVE


    A Sleeved block does not look anything like the one you have

    also the reason that fuckin sleeve is offset is cuz the motor was run hot at one point...needs to be decked
  6. 11-13-2006, 07:13 PM #6
    Annihilation
    Annihilation is offline
    I SHift at 10k Annihilation's Avatar
    Join Date
    Oct 2003
    Location
    30047-REDLINE, WAT REDLINE? 10k Shifts ALL day
    Age
    41
    Posts
    3,846
    Rep Power
    26

    Default

    Go fucking crawl back under a rock u Elephant turd and scam someone else


    just a little info....stock sleeves are Iron too
  7. 11-13-2006, 07:19 PM #7
    green91
    green91 is offline
    Mountain man green91's Avatar
    Join Date
    May 2003
    Location
    Dahlonega, Ga
    Posts
    8,975
    Rep Power
    46

    Default

    BWAHAHAHAHAHHAHA OMG HAHAHA ROFL MAO KEKEKE LOLOLOL ROFL!!!

    dumbass.
  8. 11-13-2006, 07:20 PM #8
    SixSquared
    SixSquared is offline
    CHIEF LITTLEFINGERS! SixSquared's Avatar
    Join Date
    Oct 2005
    Location
    Athens/ATL
    Age
    41
    Posts
    8,054
    Rep Power
    31

    Default

    Best FS post of the year. YES!

    Fuck stance. Stance is for kids in skinny jeans with Justin Beiber haircuts. You don't need stance when you got swagger.
  9. 11-13-2006, 08:29 PM #9
    OG-Skinny
    OG-Skinny is offline
    OG Member/Supporter OG-Skinny's Avatar
    Join Date
    Nov 2002
    Location
    Turbo City USA
    Posts
    4,013
    Rep Power
    30

    Default

    Darton Doesn't even have open sleeves. If you wanted to even come close to it, you'd of said they were RS sleeved. but still, you have a stock block.

    N00b..
  10. 11-13-2006, 08:32 PM #10
    BTEC
    BTEC is offline
    THERE CAN B ONLY ONE BTEC's Avatar
    Join Date
    Mar 2005
    Location
    A WORLD OF ANGER AND CONFUSION.
    Age
    45
    Posts
    17,271
    Rep Power
    40

    Default

    lol!! i was like uhhhh, yeah so those are stock sleeves as well. u got lied to homey. and those pics dnt show the real condition of the crank. u gotta get closer and get clearer pics. thanks for a good laugh though.
  11. 11-13-2006, 09:11 PM #11
    qdiesel
    qdiesel is offline
    IA Member
    Join Date
    Oct 2005
    Age
    38
    Posts
    124
    Rep Power
    0

    Default

    funny shit...lol..
  12. 11-13-2006, 09:27 PM #12
    secondgencamaro
    secondgencamaro is offline
    The Chinese Chicken! secondgencamaro's Avatar
    Join Date
    Apr 2005
    Location
    Lawrenceville, GA
    Age
    37
    Posts
    776
    Rep Power
    21

    Default

    I'm wondering how long that crank has been laying on it's side like that.
  13. 11-13-2006, 09:34 PM #13
    silversol
    silversol is offline
    IA SITE SPONSOR! silversol's Avatar
    Join Date
    Sep 2005
    Location
    LAWRENCEVILLE
    Age
    40
    Posts
    10,211
    Rep Power
    37

    Default

    Quote Originally Posted by TurboD16
    Well its funny that I have never seen a b16 with IRON sleeves.
    Oh and Automotive Precision Machinery told me they were,
    and for your Info I make METH not motors...NOOB,...lol thats funny

    Oh and I dont care if a sleeved block cost $1000, I dont have any $ IN THE BLOCK, so I dont care if I get $100 for it.....

    i dont think thats some thing I would post on a public forum!!!!! If I were you!
    Hella stock member!
  14. 11-13-2006, 10:02 PM #14
    Vteckidd
    Vteckidd is offline
    Gods Chariot Vteckidd's Avatar
    Join Date
    Jul 2003
    Location
    Atlanta Centennial Park
    Age
    44
    Posts
    33,102
    Rep Power
    71

    Default

    calls police , whqat a dumbass
    Enterprise Data Resources- Ecommerce Project Manager
    -www.usedbarcode.net
« FT:G35 Wheels FS:S13 Goodies | h22 head crower cams »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!