FS: OEM oxygen sensor
-2001 oem prelude 4-wire heated primary oxygyen sensor
-32k on the 02 sensor
-50 dollars firm local buyer 60 shipped if other
I threw a CEL for slow response. I had the code cleared and the CEL never reappeared which indicates it was a intermediate failure. However, I still chose to replace it with. I just recently tested the 02 and is it is responding with no pauses. Russ can vouch that it was in working condition. You can test it yourself if you have a torch and volt-meter.
You can see that there are no deposits or any excessive carbon buildup...
tech article w/ pictures showing a bad 02 sensor...(scroll to the bottom)
http://www.ngkspark.com.au/tech_info_oxyge...nsors_index.htm
Reply With Quote