FS: DSM turbo parts

[lazar]

2g ported manifold, has a couple thousand on it 120$

FP RED POLISHED compressor cover
fp red is a 60-1 with a tdo6h clipped turbine wheel. Good for 530WHP
Selling with feed and return lines. turbo is in perfect shape. Full boost on a busted @$$ 4g63T@4k rpms 900$

93 DSM AUTO ECU 100$ Same as 5speed but is setup for 380cc injectors

93 DSM AUTO TCU $80

93 4 BOLT LSD AUTO rear diff. has some rust from sitting but worked perfectly. It has a diff ratio than 5speed rear diff. 80$

Apexi ITC - timing controller $200

780CC AMS injectors $260

7 Bolt AWD 4g63 flywheel .610 step $40

7 bolt arp headstuds $50

crower stage 2 cams $300

spearco 2-120 streetcore 24x8x3.5
350$ core only, 450$ with piping. they are custom pipes not a kit,so dont expect anythign fancy, setup for a blow through maf

[Street Distinction]

are the cams like the 272's(HKS) and are they used?

[chnco]

crower stage 2 cams $300

Mike-

send me pics of the front mount [email protected]

[lazar]

The cams are used, but in perfect shape. Have about 8k on them.
They are a little bigger than the 264/272 combo