krucial7integra F---------!!!!!!!!
yo man...answer my phone calls.....i did a leak down test on the motor u sold me.... u said "its good man, run strong"...well the #1 and #2 cylinders show 70% leakage and 2 was good....the thing is i am not content with spending 250 on a damn fuk up motor.....i will take the tranny .....but not the motor....i took ur word for it and everything....but just either answer my calls, call me back, or something....i will take the tranny, just bring the cash for the motor back
oh shit jimmy got called the fuck out
Canon Nutswinger:
Canon XS
18-55mm
55-250mm
50mm USM
called at 11:18am, no pick up.
Ok, for the record, IT WASN'T MY MOTOR!!!!! you talked to someone else on IA and you know that, but you couldn't contact him again so you asked me to contact him in which I did, Hell I even left work early to load it up and deliver an hour drive in traffic to your shop. The tranny, you bought from the guy also. This was not my motor or was it my tranny, I even went out of my way to take the guy down to your shop cuz he didn't know where it was. Plus you are pretty sure damn picky about it the whole damn time lowballs after lowballs. I could have came on here and made a thread about how much you lowball AFTER we got there but I didn't. $600 for a LS swap is dirt cheap people, this is what it came with the time of delivery....LONGBLOCK including IM, fuel rail, injectors, dizzy, alternator, the whole nine yards. Y80 tranny, engine harness, motor mounts missing the driver side. Now thats one hell of a LOWBALL but I looked pass that. I am doing the best I can to contact the guy for you but you keep calling me WHILE I'M AT WORK, there aint shit I can do while I'm here. I just can't believe you made a thread on this.
AGAIN THIS IS NOT A FULL SWAP LIKE U SAID...i could have gotten a whole complete swap for like 800$....save me alot of hassle....the "full swap" u talking about was missing mounts and axles.....so just deal wit that guy and hit me back....i low ball for a reaason....if i see good stuff i won;t lowball....everyone that i bought stuff from on here knows that....and everyone that buy stuff from me know that...i wont sell anything that is not wat i said to them....
good stuff and you won't lowball......no comment on that. You're always saying you can get a better deal, but why do you keep coming to me then? why don't you get that swap for $800? only thing he was missing was the axles and 1 MOUNT. This is the last time I will go out of my way to help you out, just like last time, had to sit in traffic and come all the way to you to lose another $50 just cuz I didn't have a switch. Its all good though, I will talk to the guy and straighten this out.Originally Posted by VinhBodyS
^^i think u are lefting stuff out...lolz....if it was missing just the axles and 1 mounts...then i have nothing to say.....but its not ....so all of ur wording are 20% CORRECT and the rest are not true....u didn;t just miss the switch u miss the lip as well........but like i said ...its all good if u get the stuff straighten out....u know that a blown motor for 250 is steep
ok, this is definetly the last time I do business with you, you told me on the phone before to take off an item to make it cheaper, so I took off the lip, End of story and you know thats true. As for the motor swap, the only thing that was missing was the axles and 1 mount. The starter and speed sensor was not listed in the deal nor did I have any idea about that which you should take up with him since it was his tranny. As for the motor, I brought everything but 1 mount. Hell I even gave you a ECU for the hell of it. Steep is only defined in the eyes of a lowballer. If I didn't sell it to you yesterday i could have gotten $600 no questions like I stated on the phone, compared to your offer of $350 for a whole swap. But instead I told him to sell it to you because you needed it and now this.....
omg....600 for a fuk up motor.....just get the deal even and its koo....i reather not deal wit u anymore ...thanx
god damn god damn....... this is gettin juicy....
no this is not gettin juicy twan, me and li go back, but thats what sucks about going back is I can't charge him what I want to charge because of that, at the same time it pisses me off but then again its no biggy.
yea i feel you...... i've met both of you and you 2 are coo as fuck in my book..... just fix this issue and dont sweat it....
-twan
^^JImmy is cool in my book...but its just his negotiation sometimes that just still giving me doubts.....i mean if i want everything there i will pay for everything there...its just parts that are missing....and i have to deduct just a little bit...but then i have to buy those parts separately which cost more than the deduction....now that is mess up....
I've done a leak down test on this motor this morning. 2 cylinder has 70% leakage. tore the motor apart and the 2 pistons have cracked ringlands on it. Li also said that the guy said it was never boosted, but it had an oil return line on the oil pan. Li does not know that. Wished i was there to buy the motor with him, as i would know of it. the thread on the oil pressure unit is stripped, and the half shaft thread holes are also stripped. Motor is not that great looking also.
so he got fucked over, basically.........
^^lol....i did....but screw it...plans for it is under way....but i ma just deal wit my lost....as long as he keep up his side of the bargain...there are a few stuff that was missing...but if i dont; get it...then its not a big deal...in the future i just wnat to get wat i paid for....and not having to deal wit lost or being fuked over....a few hundreds are not a big issues...issues are in how buyer and seller negotiate and the honesty that comes wit it
DAMN
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
im excuse me but imma have to BUTT in we told him that it was RECENTLY boosted thank you.. everyone that was there with me can vouch for that thank you
Bloods In Peace
Kakada Prum Chhoeup Chhom
Feb 4th 2006 Feb 19th 2006
MASTERS OF THE UNIVERSE
AnyBody Wanna Drink Wit Me =)
but anyways when they had the LS swap.. it was running fine.. and it was one of the quickest LS ive seen in action.. iono how it got fuckd up... and this is not my part to jump in.. but yeah jimmy was just the middle man.. which he didnt even know anything.. he was giving dude and other dude connection to each other... so its their problem not jimmy's... in my book jimmy is A+ thank you
Bloods In Peace
Kakada Prum Chhoeup Chhom
Feb 4th 2006 Feb 19th 2006
MASTERS OF THE UNIVERSE
AnyBody Wanna Drink Wit Me =)
Two Bent Lower Control Arms.. Vinh.. Remember that..!
why was the ls swap pulled in the first place? if it was a strong running ls
HUH?.....bent lower control arms? who is this?
but excuse me....so where is the rest of the swap?....its still a rip off even tho i only took 100$ off from the 600 ...and what do i get....a bare tranny and a messed up motor.....if Jimmy was only a middle man...then maybe next time he won't be in the midlle of those sellers and any other buyers.....he mention in his earlier post about "the motor had IM, fuel rail, injectors, dizzy...
....thank you!
because he was tired of not having vtec lol.
double1trey6, thanks man
^^^^ what jimmy said
Bloods In Peace
Kakada Prum Chhoeup Chhom
Feb 4th 2006 Feb 19th 2006
MASTERS OF THE UNIVERSE
AnyBody Wanna Drink Wit Me =)
are you sure that was it? or was it leaking oil from the block where the oil line got teed off from? the dumbass stripped the thread on the block where it was teed. but oh well, the deal is settled. block is going to the machine shop.
are you trying to call someone out? by calling that person a "dumbass" and like i said and ill say it again... NOBODY and i mean NOBODY knew it was "bad" as you guys said it was... if we knew it was bad we wouldnt even sold it in the first place... we had another buyer.. but jimmy wanted to sell to ya... why... because him and "vingbodys" is coo with each other... but now we know not to deal with any other picky people
Bloods In Peace
Kakada Prum Chhoeup Chhom
Feb 4th 2006 Feb 19th 2006
MASTERS OF THE UNIVERSE
AnyBody Wanna Drink Wit Me =)
i consider this issue to be over.....admin please delete or remove this thread....it's not resolve like i wanted it to....but wat is done is done....just trying to let them know....thanx for your time....
vuong knows his stuff. . hahaha
If i wanted to call someone out, then i would of called them out. Who ever the dumbass is, is a dumbass for teeing the turbo line with a brass tee from autozone or something. the thread is different. Like i said, the deal is settled, and you need to shut the fuck up, no one is starting shit here.
lol ok mr big shot.. ill "shut the fuck up now"
Bloods In Peace
Kakada Prum Chhoeup Chhom
Feb 4th 2006 Feb 19th 2006
MASTERS OF THE UNIVERSE
AnyBody Wanna Drink Wit Me =)
This can sit for a bit as a BUYER BEWARE type deal. Later, QD.
FOR MORE INFO, CLICK THE PIC!!!
^^aight....good...lolz...and if i am not wrong....Double1Trey6 is the owner of the motor....if not the make it known...
Hmmm. I'm not much surprised. Later, QD.
FOR MORE INFO, CLICK THE PIC!!!
damn jimmy how in the hell they blaming you for the mix up. you just was trying to help someone else out. but good luck on this dude. i did not have any problems on my deal.
^^aight...this is just a suggestion to solve the problem....if the owner of the motor agree to refund part of the money back then that would be cool....no grudges....i know that the motor is 300$...so if i get around 150 back that would make me feel alot better about buying the damn thing...lolz...thanx first of all
Damn Jimmy I think u should get our of the middle man business and let us Professionals take care of stuff liek this.....like me
vinh....shoulda bought that swap u begged me for days
Last edited by annihilation; 08-15-2006 at 02:26 PM.
I have done 2 transactions with jimmy and both went smooth and I ended up very happy with the deal. U cant really place the blame on him for trying to help out.
thanks guys for vouching for me, I have done plenty of business transaction on this board and 9/10 times the buyer/trader is always satisfied. This incident was just too frustrating for me because I was going out of my way (leaving work) to sell him this motor which was already sold to a different candidate but he really wanted it so I decided to sell to vinhs.
Damn Jimmy I think u should get our of the middle man business and let us Professionals take care of stuff liek this.....like me
vinh....shoulda bought that swap u begged me for days
Posting Permissions
Reply With Quote
