1994 Honda Civic Hatchback Turbo

[Darling Nikki]

This vehicle has a 95 GS-R motor swap done which is bored out to a 2.0L
JE High Compression Pistons
Victor-X Intake Manifold
Full T-4 Turbo Set-up which is complete with an after market exhaust
Included is a Greddy Turbo Timer and a Carbon Fiber Boost Guage
Also has after market 15" Wheels

There are many extras and if you are interested
Please call Luca Vullo @ 404-630-0319 or myself @ 678-557-3831

The amount that is being asked is $6,000 and the location is Chamblee, GA.

If you are looking for the VIN # look at the pic that is attached.

Also I don't get a chance to get on the forum at all anymore bc of my new job so please just call either number and please don't abuse these numbers. Thank you.

[Darling Nikki]

Here are a couple other pictures.

[GsrCrx]

http://forums.importatlanta.com/showthread.php?t=61458 TRADE?????

[Vteckidd]

1) that is NOT a T4 turbo
2) that is a SS AUTOCROME manifold
3) You cannot BORE a GSR out to 2.0l, it has to be SLEEVED
4) YOu dont run HIGH COMPRESSION PISTONS in a turbo motor

you might want to provide receipts of ACTUAL work done, because right now nothing makes any sense what so ever.

That looks like a cheap XS power turbo kit, on a GSR motor with a edelbrock manifold. You should state what sleeves are in the motor, waht size pistons, what compression, what rods, any dyno numbers, who did all the work, etc.

[Vteckidd]

matter of fact I KNOW thats a $900 XS Power TURBO kit from ebay, i just took one off another car thats at our shop cause hes upgrading to our turbo kit.

That is probably a T3 TURBO, thats what they come with.

[i4_garage]

if he parted the car...i will buy the shell...lol

[2.0civic]

1) that is NOT a T4 turbo
2) that is a SS AUTOCROME manifold
3) You cannot BORE a GSR out to 2.0l, it has to be SLEEVED
4) YOu dont run HIGH COMPRESSION PISTONS in a turbo motor

you might want to provide receipts of ACTUAL work done, because right now nothing makes any sense what so ever.

That looks like a cheap XS power turbo kit, on a GSR motor with a edelbrock manifold. You should state what sleeves are in the motor, waht size pistons, what compression, what rods, any dyno numbers, who did all the work, etc.

BWAHAHAHAH!!!!! OWNED!!! i thought the same about the "high comp" pistons +turbo... nice....

[japan4racing]

wow...keep the the turbo kit and ill give you $1500

[Z33_kid]

ill give u 3gs

[KevinT707]

I love VtecKidd !

[thinkskater]

there was a hatch just fkin like that in autotrader, i remember it said something about 2.0 turbo gsr motor , i know it is that car cuz of the ugly irish green , and those swiss cheese wheel with the holes lol , but id give 35 -4 for the car as long as their were receipts for the works needs to fkin lowered too

[Darling Nikki]

there was a hatch just fkin like that in autotrader, i remember it said something about 2.0 turbo gsr motor , i know it is that car cuz of the ugly irish green , and those swiss cheese wheel with the holes lol , but id give 35 -4 for the car as long as their were receipts for the works needs to fkin lowered too

There are receipts I have seen them. The vehile has had a lot of work done at Mahdavi Motorsports. Its not a big deal we are just trying to get sell the car. No need for bashing, but I cant stop you guys.

Like I said before I don't even get on this site much at all. Just to check my pm's and thats it. If you're interested feel free to call. I would like you to call me first if no one minds.

[Vteckidd]

Nikki i wasnt bashing you, we are cool .

what im saying is, that info posted is wrong. that will depreciate an not get you what your looking for.

my advice is have the receipts from Mahdavi Motorsports posted so people know what was spent an what the car really has.

goodl uck

[Julio]

6k ? def going to need the luck.

[2.0civic]

damn no recipts yet?

[incawarrior]

bump for info.