Lots of Civic/Integra Stuff FS/FT!!!!!!!

**Mr_S13®** · 03-07-2005, 09:10 PM

Here's what I got guys. All prices are negotiable. And I am willing to accept trades because I am selling this stuff to get new stuff!!

D16z6 Dizzy, $50

Virgin p05, manual, $50

LS Block, code b1295h, great shape, only disassembled because I was gonna sleeve it and bore it. But I never got a chance. needs honed, Looking to get $150...

cx transmission, vin# jhgeh2351sh515199, perfect, no grinds...$150

DX intake manifold, good shape, $40

B20 throttle body, w/ sensors, $40

96 Integra Gauge Cluster, 103k mi., plugs and plenty of wire left for civic install, $75

99 Civic EX Gauge Cluster, 115k mi., $60

92-96 Prelude Lip kit, wings west, missing front lip though, white, good shape...$75

FULL Integra Gsr Front Suspension, axles, hubs, rotors, calipers, pads, soft lines, upper and lower control arms, springs, struts and forks...$250

92-95 Civic Hatch rear bumper, white, good shape, $40

88-91 Civic Si rear hatch, red, great shape, nothing broken, $75

96-00 Civic Factory Side Skirts, primered, good shape, $50

LS Cams with gears,$40

Integra Side Skirts, Bomex, Fiberglass, brand new, $75

Header for d series, don't know what kind...4-2-1, $50, needs paint

Also I have lots of DA parts off a car im building, not sure what all im gonna use yet. Hit me up with any parts request on that. 91 Teg LS.

That's all I can think of right now...will list more later. Im really looking for a set of small wheels, 15, 16"...or hatchback parts. Post up, e-mail at [email protected], or call 678-925-1246 Thanks guys!

Jeremy

**ebkmike** · 03-07-2005, 09:32 PM

have rear disc?

**Mr_S13®** · 03-07-2005, 09:52 PM

Nah man, just front. I want the rear though...lol

**Mr_S13®** · 03-08-2005, 02:21 PM

Bump!!!

**btldzc** · 03-08-2005, 02:23 PM

75$ FOR THE LS HEAD

**Mr_S13®** · 03-09-2005, 12:20 AM

up

**Mr_S13®** · 03-09-2005, 10:27 PM

bump

**integra8705** · 03-10-2005, 09:10 AM

how are the axels ??? 50 for both?

**Mr_S13®** · 03-10-2005, 02:06 PM

No thanks...

**Mr_S13®** · 03-10-2005, 11:06 PM

up

**LS2ner** · 03-11-2005, 04:05 AM

what all comes with the LS block? cause seriously interested. got cash and can meet you sunday. oh and how many miles?

**Mr_S13®** · 03-11-2005, 01:21 PM

It has the oil pan, pick up, belly pan, crank, pistons, rods, and I will throw in an a/c bracket and a set of factory ls cams with gears. It is a complete bottom end, just disassembled because I was gonna bore it and sleeve it for a ls/vtec...but I decided to go with an sohc.

**LS2ner** · 03-11-2005, 02:15 PM

i only really need the block but for the price i dont care what all comes with it. im also doing an LS/vtec. how many miles it got? you can call me sometime tomarrow before 4 or tonight after 10:30 if you want. 706-483-3028

**Brandon C** · 03-11-2005, 03:38 PM

will the 99 ex gauge cluster fit in my 94 Ex? If So I am interested

**BOOSTEDeg** · 03-11-2005, 09:08 PM

I pm'ed you with no response. You wanna sell that stuff?

**Mr_S13®** · 03-11-2005, 10:15 PM

The engine had 68k on it when I installed it and I put 12k on it before it was pulled.

**Mr_S13®** · 03-11-2005, 10:16 PM

The ex cluster will not fit the 94 ex without modification. Sorry.

**BOOSTEDeg** · 03-12-2005, 04:12 PM

I am also interested in the block. I am trying to figure out how difficult it is to do the ls/vtec. I am interested. Give me a call (706)364-4936, Bruce

**LS2ner** · 03-12-2005, 10:02 PM

got cash... can meet you tomarrow. Lemme know whats up

706-483-3028

**LS2ner** · 03-13-2005, 01:31 PM

im heading to ATL tonight...let me know whtas up with the block.. still very interested

**Mr_S13®** · 03-13-2005, 07:17 PM

up

**93H22ACX** · 03-14-2005, 02:46 PM

you dont have any OEM 90-93 integra axles do you?

**btldzc** · 03-14-2005, 03:37 PM

DOOD!!! I WAITED AT RACE WORKS TILL 7:15 FOR YOUR FRIED JOEL HE NEVER SHOWED! WHAT HAPPEND?

**Mr_S13®** · 03-14-2005, 11:04 PM

I have no idea, I had nothing to do with that...he said he went up there but was like 15 minutes late. Not sure what time that would have made it...lmk and I will meet you if need be...And im not 100 % sure but I think 90-93 and 94-01 Integra axles are all the same...

**93H22ACX** · 03-15-2005, 06:20 AM

one side is but the other isnt. i'll probably pick them up. i'll check to see if they will work.

**BOOSTEDeg** · 03-15-2005, 11:06 AM

Still got the ls block?

**Mr_S13®** · 03-16-2005, 09:17 AM

yep, still available

**mp5o** · 03-16-2005, 02:13 PM

Is the z6 engine still running? Miles? Etc?

**Mr_S13®** · 03-16-2005, 04:01 PM

I don't know anything about the z6 motor, I took the head off and looked everything over and it looks good but I have not tried to run it or compression test it. SO, I have no idea..

**Bring It!!** · 03-16-2005, 04:04 PM

If you still have comple LS head and block I got cash!

**Bring It!!** · 03-16-2005, 04:05 PM

and cams and gears!

**xplicitcivic04** · 03-16-2005, 05:44 PM

how much for the c west bumper
and what color

**mshoe1403** · 03-16-2005, 07:24 PM

i tried calling your # but no answer. im interested in the d16z6. . im also in the cumming area.

please can call me at 678-223-5479

thanks ryan

**LS2ner** · 03-17-2005, 11:38 PM

also tried calling you bro, got no answer twice. left you a message

**Mr_S13®** · 03-17-2005, 11:50 PM

Yeah man, got your message...I was in class. Didn't want to call you at work.

**BOOSTEDeg** · 03-18-2005, 09:14 AM

IS THE BLOCK SOLD OR WHAT?????

**Mr_S13®** · 03-18-2005, 03:36 PM

Nope, still up

**scttydb411** · 03-18-2005, 07:53 PM

interested in the p28...auto or manual?

ck your pm

**Mr_S13®** · 03-18-2005, 10:00 PM

Replied, both ecu's are manual

**Mr_S13®** · 03-19-2005, 08:27 PM

wanna deal...make some offers...

Thread: Lots of Civic/Integra Stuff FS/FT!!!!!!!

Thread Tools

Display

New Parts, Check it out!!!

Posting Permissions

About us

Announcement