Results 1 to 2 of 2

Thread: F22B and tranny

  1. #1
    Bender A. Rodriguez
    Join Date
    Mar 2005
    Location
    Macon
    Age
    45
    Posts
    1,678
    Rep Power
    22

    Default F22B and tranny

    I've got a motor set we just took out of a 94 prelude. The motor is an F22B that he put in about a year ago. He bought it with about 30K and put another 30K on it after the swap. It has an Exedy stage one clutch and stock flywheel that was put on when the swap was done. The clutch still has decent life left, I have pulled the transmission off to check. We pulled the motor to put in an H22 but I'm not certain of its history past the mileage. I drove it briefly before the swap and didn't see any problems but I never drove it very hard. Compression tests out at about 190 across the board. It comes with the full motor and tranny+the half shaft and the computer. I don't have the wiring harness since I had to use it for the H22. It also will come with a DC sports header and a short ram intake. I will consider parting some of the stuff out but would like to keep the motor and tranny together if possible. I also have a spare H22 ps pump and pressure line.

    $1400 for all of it obo.
    Block # 1105525
    Tranny #M2S4-1007585
    Last edited by Cool Cat Racing; 01-27-2006 at 12:43 PM.

  2. #2
    Bender A. Rodriguez
    Join Date
    Mar 2005
    Location
    Macon
    Age
    45
    Posts
    1,678
    Rep Power
    22

    Default

    Bump, need this stuff gone quickly. I also have the H22 alternator.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!