B18c1 head & DC2 parts!

[speedminded]

Picture will be up tonight and i may have more parts to list ...

B18c1 [GS-R] head - '01 37k miles, complete & includes the intake manifold but no vtec solenoid, distributor, or valve cover. - $300.00

Comptech Axle back - Stainless, less than a year old and it's so clean you can easily shave in it's reflection - $275.00 obo

DC2 hood, Silver (not sure the paint code) - has some scratches where a small cardboard box was slid across it. - $25.00 SOLD

2001 OEM Spoiler with LED's - Frost white - $25.00

'98 cat-back with OEM GS-R muffler - $75

'01 cat-back with Carbon Fiber R1 Can (+ silencer) - $75


1996 Chrysler Town & Country - Burgandy with all Creme leather, 200k+ miles, one owner since 1998. - $3,800

[BTEC]

B18c1 [GS-R] head - '01 37k miles, complete but no vtec solenoid, distributor, or valve cover. $300.00

well thats not complete asshole!! lol!! just giving you trouble bci got trouble bout my head. good price though.

[speedminded]

B18c1 [GS-R] head - '01 37k miles, complete but no vtec solenoid, distributor, or valve cover. $300.00

well thats not complete asshole!! lol!! just giving you trouble bci got trouble bout my head. good price though.

everyone always asks if it has the cam shafts...it's a complete P72 head minus any bolt on attachments

[BTEC]

everyone always asked if it has the cam shafts...it's a complete P72 head minus any bolt on attachments

if it doesnt come with an intake manifold ur gonna get hell about that.

[speedminded]

if it doesnt come with an intake manifold ur gonna get hell about that.

ohh yeah...ok...comes with a 2001 GS-R intake manifold including all the emmissions shit if you want that too

[IntegraXTR]

jason you got a comptech axel back? wanna trade?

[speedminded]

jason you got a comptech axel back? wanna trade?

For the black chrome Apex'i N1? If it was a Fujistubo RMO1a then yes, but looking for money right now.

[blacknightteg]

damn dude, if it had everything on that head id take that shit from you man

[IntegraXTR]

I still want that red aem intake he has to match my car

[blacknightteg]

hey i wouldnt mind havin that either lol BATTLE OF THE RED TEGGYS! lol

[Jdm94Coupe]

lol i was just gonna give you shit bout the complete head thing, i was lookin for a b16 head before but i got a grown man head, lol......i'd like to check out the


'01 cat-back with Carbon Fiber R1 Can (+ silencer) - $75

speedminded do you do bodywork? i see yo teggy lookin REAL slick, lol....im lookin to get all this bullshit off my teg...holla at ya boi....

[Jdm94Coupe]

btw good price on dat head.....and its low milege too! NICE!

[IntegraXTR]

seen all these parts in person including the head, very clean, I can vouch for jason. But I still want that damn red aem intake

[spoolinb18]

PM'ED!!!!

[Annihilation]

call me about that hood 404-488-3358

[Pher]

Bump... come on people, we need this stuff gone asap!

Here is the link to the Comptech Stainless Axleback via their website. http://www.comptechusa.com/store/240102.html

[luvleexcivic]

aye, u willing to part out the head? very interested. lmk!

[Jdm94Coupe]

i asked about the exhaust and didnt get an answer.......o well

[Pher]

i asked about the exhaust and didnt get an answer.......o well

When? Where? I'm on AIM right now if you care to talk about it.

[IntegraXTR]

I want that red aem intake damnit!!!!

[speedminded]

I want that red aem intake damnit!!!!

lol, lemme talk to adrian and i'll see. Picked up a CRX this morning and will have alot more parts to list too

[IntegraXTR]

I'm going to go over there while you're sleeping jason and take that intake!!! lol, j/k I see that you have a ITR steering wheel now too, goes great with the valve cover and shift boot

[speedminded]

I'm going to go over there while you're sleeping jason and take that intake!!! lol, j/k I see that you have a ITR steering wheel now too, goes great with the valve cover and shift boot

still debating on using the shift boot...i like the [nearly] all black interior theme and the red threads on the steering wheel are faded so i'm thinking about just staining them black with a fabric/carpet paint. I love the boot bc it's in perfect condition but stain the wheel then the red threads on the boot are gonna look goofy. Trying to stay away from the two tone interior, dunno what to do

[IntegraXTR]

this is what you do jason, and if you follow this correctly everything will work out.....1) call adrian and tell him a little chinese dude took the intake and swapped it out with his then ran off with it all at the same time while you went to take a leak.

[speedminded]

this is what you do jason, and if you follow this correctly everything will work out.....1) call adrian and tell him a little chinese dude took the intake and swapped it out with his then ran off with it all at the same time while you went to take a leak.

..and i suppose this little chinese man left my Brembo calipers next to it?

[IntegraXTR]

of course, lol....but back to the subject, no you should not paint the red stitchings dude, I realize that it might be faded but you should never alter the way it is because thats what makes it jdm.

[speedminded]

of course, lol....but back to the subject, no you should not paint the red stitchings dude, I realize that it might be faded but you should never alter the way it is because thats what makes it jdm.

but the wheel itself is made in Italy...and it had red on the center logo...the threads look pinkish...i could color them but like i said before..trying to avoid the whole two tone theme. I may be boring but i like clean looks...

[Sleepin Hatch]

do you think the catback will fit in a eg w/ a B?

[speedminded]

do you think the catback will fit in a eg w/ a B?

not sure about that...the suspension is the same so it should have the same bends in it but i don't know about the length to the cat.

[The Golden Child]

the b18c1 gsr head - would it fit nicely on a b16a2 block ?

also is it port & polished ?? if not how much is it to get it port & polished ??

[speedminded]

the b18c1 gsr head - would it fit nicely on a b16a2 block ?

also is it port & polished ?? if not how much is it to get it port & polished ??

i dunno how it would work on a smaller block....it would probably raise the compression...if anything throw it on an B18b or B20 block. port and polish is all how much you want to spend and exactly how much porting you want....

[Pher]

this is what you do jason, and if you follow this correctly everything will work out.....1) call adrian and tell him a little chinese dude took the intake and swapped it out with his then ran off with it all at the same time while you went to take a leak.

You're Chinese?

[IntegraXTR]

You're Chinese?

lol, no I'm viet chris, but figured the joke would be funnier if I said chinese

[Pher]

lol, no I'm viet chris, but figured the joke would be funnier if I said chinese

Thats what I thought. Hence the ""

[Pher]

Come on people... ITS OBO!

[Pher]

bump

[punkr6]

I want the head check pms call me

[Azn-Boost]

pics of axle back??

[Pher]

PM Sent

[94LSEG]

hey i might need that head like next week so LMK if you still got it and if your willing to just sell the head itself and no intake and all that... LMK and how much is the lowest you will take.