WTB: bar and plate fmic

[EclipseE16g]

Hey im looking for a bar and plate front mount intercooler. I need something atleast 2.5 to 3.5in thick. Let me know what you have.
Thanks

[Spyder]

Hey im looking for a bar and plate front mount intercooler. I need something atleast 2.5 to 3.5in thick. Let me know what you have.
Thanks

Any particular reason you want a bar and plate over a tube and fin? also... try... www.ebay.com they have them cheap now.

[ct9a gsr]

Precision Turbo & Engine GIANT FMIC w/ polished end tanks - used for about 5,000 miles.

Meaasures roughtly about 24" x 10.5" x 3.5"

PM me with an offer.

[EclipseE16g]

"Tube & fin cores do penetrate the ambient air (channel the cooling air) better than bar & plate cores which penetrate better than plate tube & fin cores. Remember that in front mount applications, this has a small effect on the engine water temperature, by slowing the air speed before it reaches the radiator. This is because the rounded leading edge of the tube & fin tube parts the air with less turbulence than the square leading edge of the bar & plate tube, which parts the air with less turbulence than the "W" shape of the tube & fin tube"

I do have a tube and fin design right now (modified starion), but it doesnt flow enough for my turbo.