95 Civic Clutch Difficulty?

[Sunkenkarma]

So, Im pretty sure my clutch is going out on my 95 civic dx coupe. I know a clutch isnt expensive, its the part of paying someone to do it that can get pricey. A few of my friends say its easy, and I believe them, but Ive never done a clutch. I have the haynes manual to go by, but thats about it xD. Also, I have no air tools, which I hear can make the whole process alot faster. So, In theory, should me and a friend be able to do this alone? Im totally down for learning to do it, but I dont really want to mess anything up =p.

As for a new clutch when getting a new one, should I get a upgraded one? IE: Stage 1,2,3, or go oem? Its stock, so its not like I will be holding more than 120hp.

Thanks for the help ahead of time guys, Look forward to hearing some insight.

[-EnVus-]

Id go OEM specs kit and yes its pretty easy and yes air tools would be nice but not necessarily...

[Tech5]

easy if you damage anything ill buy the car

[Sammich]

^ lol

to the OP have you ever replaced a trans in any car before? id take it to a shop or get those friends to help you...should be fairly cheap to replace...maybe $200 in labor

[Black4DrEK]

Do it with your friends. IF they have done it before..

Hands on Learning is key!

[EmminoDaGreat]

i think we charge 275 to do one.

[psycho_freke]

I know if you're running the stock motor that you have SOHC, however this write-up on doing a B18 should give you some direction:

http://www.team-integra.net/forum/bl...3-integra.html

It's not that much different.